Cymatoxa
Full Member
Offline
Activity: 378
Merit: 121
"SWISSREALCOIN - FIRST REAL ESTATE CRYPTO TOKEN"
|
|
April 20, 2017, 02:18:09 PM |
|
Guys let's get together all together and try to promote the coin on BITTREX. Suddenly we will succeed! Who does not mind?
How?, I Will help promote if i can Just rise BTCs to pay Bittrex and problem is solved. I'm new to these matters. But whoever is going to let it start and we will all help.
|
|
|
|
gnargnar
Legendary
Offline
Activity: 1111
Merit: 1000
crypto-enthusiast since 2012
|
|
April 20, 2017, 02:33:24 PM |
|
I'm going to buy with 1 bitcoin everything that is sold in icash so be prepared for the bubble
I trust you! Guys, you should trust him... he will buy with 1 bitcoin. Moon this!
|
|
|
|
Polcrack
Full Member
Offline
Activity: 280
Merit: 100
Just Believe in trusted/transparents Proyects
|
|
April 20, 2017, 02:38:59 PM |
|
I'm going to buy with 1 bitcoin everything that is sold in icash so be prepared for the bubble
I trust you! Guys, you should trust him... he will buy with 1 bitcoin. Moon this! of course guys and have many btc more its our proyect and go to the moon WE have the cheap MASTERNODE OF ALL CRYPTO
|
Many people scamer with Icos and shitcoins, Invest with intelligence
|
|
|
smokim87
|
|
April 20, 2017, 02:48:57 PM |
|
Tried running a masternode but getting this error: not capable masternode: Could not connect to my-public-ip:5555 I tried deleting the peer.dat file and restarting the wallet, did not help. Port is opened confirmed by checking at http://www.yougetsignal.com/tools/open-ports/ and it says 5555 is opened. Any ideas guys? I followed the steps, sent myself 100k coins exactly. oh after sending the 100k to myself, is there a min amount of confirmations needed before the masternode actually works? After searching alittle in google, appears sending 100k coins might need 15 confirmations before MN will start...waiting to hit that to test. Try open ports firewall/router 15 confirmations Looks like the 15 confirmations did the trick Just woke up to see I already started earning coins
|
|
|
|
Polcrack
Full Member
Offline
Activity: 280
Merit: 100
Just Believe in trusted/transparents Proyects
|
|
April 20, 2017, 02:50:53 PM |
|
Tried running a masternode but getting this error: not capable masternode: Could not connect to my-public-ip:5555 I tried deleting the peer.dat file and restarting the wallet, did not help. Port is opened confirmed by checking at http://www.yougetsignal.com/tools/open-ports/ and it says 5555 is opened. Any ideas guys? I followed the steps, sent myself 100k coins exactly. oh after sending the 100k to myself, is there a min amount of confirmations needed before the masternode actually works? After searching alittle in google, appears sending 100k coins might need 15 confirmations before MN will start...waiting to hit that to test. Try open ports firewall/router 15 confirmations good =)) Looks like the 15 confirmations did the trick Just woke up to see I already started earning coins
|
Many people scamer with Icos and shitcoins, Invest with intelligence
|
|
|
TomVelvetPaws
|
|
April 20, 2017, 03:03:41 PM |
|
Someone add this to poswallet for voting
|
◥ ◣◥ ◣◥ ◣ ☠ CRAVE ☠ Embrace the privacy movement ☠ ◥ ◣◥ ◣◥ ◣◥ ◣◥ ◣◥ ◣ Your Market. Your Blockchain Business. Your Profit. ◥ ◣◥ ◣◥ ◣
|
|
|
Cymatoxa
Full Member
Offline
Activity: 378
Merit: 121
"SWISSREALCOIN - FIRST REAL ESTATE CRYPTO TOKEN"
|
|
April 20, 2017, 03:34:52 PM |
|
If only I could have added, but I do not know how. Add someone who does not and all will vote.
|
|
|
|
gnargnar
Legendary
Offline
Activity: 1111
Merit: 1000
crypto-enthusiast since 2012
|
|
April 20, 2017, 03:37:59 PM |
|
someone know what is the PoS rate % Thanks
|
|
|
|
Polcrack
Full Member
Offline
Activity: 280
Merit: 100
Just Believe in trusted/transparents Proyects
|
|
April 20, 2017, 03:54:35 PM |
|
someone know what is the PoS rate % Thanks
there is not POS ONLY POW and MASTERNODES.
|
Many people scamer with Icos and shitcoins, Invest with intelligence
|
|
|
GREEDYJOHN
Legendary
Offline
Activity: 1778
Merit: 1000
|
|
April 20, 2017, 03:56:42 PM |
|
someone know what is the PoS rate % Thanks
there is not POS ONLY POW and MASTERNODES. This is why ICASH is unique. This is a clever way to minimise inflation
|
|
|
|
zaratustraa
Member
Offline
Activity: 167
Merit: 10
The Future of Decentralized Financial Services
|
|
April 20, 2017, 03:57:16 PM |
|
so, how many ICASH i need for 1 masternode?
|
|
|
|
gnargnar
Legendary
Offline
Activity: 1111
Merit: 1000
crypto-enthusiast since 2012
|
|
April 20, 2017, 03:59:48 PM |
|
someone know what is the PoS rate % Thanks
there is not POS ONLY POW and MASTERNODES. This is why ICASH is unique. This is a clever way to minimise inflation what is the reward for masternode then? thanks for the info. this coin is really interesting and so cheap. That's a huge opportunity imho. I'm not that good at predicting a coin value, but I'm sure it will go higher than 10X from the current low 100sats we have now.
|
|
|
|
smokim87
|
|
April 20, 2017, 04:08:29 PM |
|
Tried running a masternode but getting this error: not capable masternode: Could not connect to my-public-ip:5555 I tried deleting the peer.dat file and restarting the wallet, did not help. Port is opened confirmed by checking at http://www.yougetsignal.com/tools/open-ports/ and it says 5555 is opened. Any ideas guys? I followed the steps, sent myself 100k coins exactly. oh after sending the 100k to myself, is there a min amount of confirmations needed before the masternode actually works? After searching alittle in google, appears sending 100k coins might need 15 confirmations before MN will start...waiting to hit that to test. Try open ports firewall/router 15 confirmations good =)) Looks like the 15 confirmations did the trick Just woke up to see I already started earning coins Now that I got 1 masternode working, I tried setting up more the same way. Sent 100k several times from my balance to the addresses generated using the getaccountaddress command. Generated Masternodeprivkey after every transaction and placed them in the conf file Changed the masternode count in the conf file I restarted the wallet and went ahead and tried masternode start. It says masternode started remotely but the masternode count did not go up. I then tried masternode start-many and got this: "overall" : "Successfully started 0 masternodes, failed to start 0, total 0", "detail" : { } } Not sure if it worked but the masternode count did not change.
|
|
|
|
Topknotbam
Legendary
Offline
Activity: 1938
Merit: 1014
|
|
April 20, 2017, 04:10:56 PM |
|
so, how many ICASH i need for 1 masternode?
each 100,000 icash on your wallet, you can actived 1 masternode, if you have 200,000 icash you can actived 2 masternode. and i want to say it's cheap now because 1 icash price today only 87 sats - 100 sats
|
Develop Custom Decentralized Blockchain Applications in JavaScript with LISK! Website | Blog | BTT Thread | Chat - Be part of the decentralized application movement!
|
|
|
smokim87
|
|
April 20, 2017, 05:39:47 PM |
|
Tried running a masternode but getting this error: not capable masternode: Could not connect to my-public-ip:5555 I tried deleting the peer.dat file and restarting the wallet, did not help. Port is opened confirmed by checking at http://www.yougetsignal.com/tools/open-ports/ and it says 5555 is opened. Any ideas guys? I followed the steps, sent myself 100k coins exactly. oh after sending the 100k to myself, is there a min amount of confirmations needed before the masternode actually works? After searching alittle in google, appears sending 100k coins might need 15 confirmations before MN will start...waiting to hit that to test. Try open ports firewall/router 15 confirmations good =)) Looks like the 15 confirmations did the trick Just woke up to see I already started earning coins Now that I got 1 masternode working, I tried setting up more the same way. Sent 100k several times from my balance to the addresses generated using the getaccountaddress command. Generated Masternodeprivkey after every transaction and placed them in the conf file Changed the masternode count in the conf file I restarted the wallet and went ahead and tried masternode start. It says masternode started remotely but the masternode count did not go up. I then tried masternode start-many and got this: "overall" : "Successfully started 0 masternodes, failed to start 0, total 0", "detail" : { } } Not sure if it worked but the masternode count did not change. Found a dash guide on running multiple nodes using a masternode.conf file instead of the icash.conf file. The issue that seems strange is that I created 6 nodes to test, 4 work and 2 fail with error: Cannot allocate vin... I created 2 new nodes and replaced them and tried again, now those 2 nodes are working and another 2 fail. It seems that it won't let me go over 4 nodes. Anyone experience the same issue?
|
|
|
|
Coinfreak2012
Newbie
Offline
Activity: 12
Merit: 0
|
|
April 20, 2017, 05:45:50 PM |
|
so, how many ICASH i need for 1 masternode?
100 000
|
|
|
|
cryptodv
|
|
April 20, 2017, 07:50:32 PM |
|
Finally my bag is at over 100k. Masternode time
|
|
|
|
GREEDYJOHN
Legendary
Offline
Activity: 1778
Merit: 1000
|
|
April 20, 2017, 07:55:10 PM |
|
Someone add this to poswallet for voting
masternode staking at POSWALLET?
|
|
|
|
zaratustraa
Member
Offline
Activity: 167
Merit: 10
The Future of Decentralized Financial Services
|
|
April 20, 2017, 08:03:51 PM |
|
so, how many ICASH i need for 1 masternode?
each 100,000 icash on your wallet, you can actived 1 masternode, if you have 200,000 icash you can actived 2 masternode. and i want to say it's cheap now because 1 icash price today only 87 sats - 100 sats
oh okay, i think its cheap for now
|
|
|
|
cryptodv
|
|
April 20, 2017, 08:07:07 PM |
|
Someone add this to poswallet for voting
masternode staking at POSWALLET? Was it added already? I haven't seen it there.
|
|
|
|
|