[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[milospinkfloyd]

fans on my 6 x 5700xt gigabyte aorus are going mad from time to time. Just like that they begin spinning 100% and than return to normal. Temperatures are all fine, below 65c. Using last phoenix miner

[tymeksm]

Miners update:
- gminer-v2.34 (improved compatibility with Ethash pools (beepool.org). Added DAG check after generation for Ethash and ProgPoW/KAWPOW - helps detect overclock issues. Fixed "No device found" error. Fixed "NVML initialization failed" error. Decreased stale share percentage on ProgPoW/KAWPOW. Nnot stop miner when DAG generation failed on some GPU)
- t-rex-v0.19.4 (Fixed not starting with various errorrs TREX: xxxx (base64 encoded). Fixed --keep-gpu-busy not working under some conditions)
- teamredminer-v0.7.20 (Ethash - added default capped DAG allocation for 4GBs at 4072MB (see --eth_4g_max_alloc). Fixed Ethash crashes using --eth_dag_cache on 4GB gpus)
- wildrig-multi-v0.28.2 (Beta release. --print-devices now will print busID. x11k algo will use the same algo for devfee, this should improve miner stability on some cards)


Miners update:
- nbminer-nebutech-v35.0 (Ethash added statistics for invalid shares. Added statistics for Health information of AMD GPU. More detailed error information of OpenCL api. Reduced CPU usage)
- phoenixminer-v5.4b (Beta release. New kernels for Vega and Navi slightly faster when DAG buffer is approaching or passing 4GB in size. To use these new kernels, you need AMD drivers 20.10+. Automatic re-running auto-tune as needed when switching to a different DAG buffer type. Fixed crash when trying to set -mvddc on very old AMD drivers. Other small fixes and improvements)


Advanced Command update:
- Option named "download" for command "Reflash: custom image" moved to separate command for clarity


Miners update:
- bminer-v16.3.7 (Support NVIDIA 30 Series. Fix crash in NVIDIA Etherum miner)

[moderator's note: consecutive posts merged]

[ekiller]

info


 Phenis miner 5.4b crash my rigs with  SimpleMiningOS (SM-5.4.52-10-a20.30-n455.45.01)

[tymeksm]

Miners update:
- lolminer-v1.17 (Reduced Ethash power draw on Navi, Improved performance of 6800 (XT) / 6900. Added Cuckoo-29, Cuckaroo-30 CTX, Cuckatoo-31 (MWC) and Cuckatoo-32 (Grin) for RX 6800. Reduced stale shares on Cortex - minimally lower hash rate, but higher pool side hash. Added basic temperature protection. Added --singlethread for Ethash and Equihash - will disable the 2nd mining thread and slightly reduce performance of involved cards. Added reading of junction temperature on AMD. Fixed Ethash Ethproxy stratum mode loosing worker name. Fixed Ethash, Beam not starting on Radeon R9 380. Fixed Ethash not starting on some 6G NVIDIA. Fixed Ethash trying to start up card after error)


Miners update:
- gminer-v2.35 (Removed algos: Eaglesong, Handshake, Kadena, BeamHashI, BeamHashII, Grimm, Cuckaroo29, Cuckaroom29, Equihash 96,5. Significantly reduced binary size. Significantly performance improvements for KAWPOW/ProgPoW algorithms on mining edition GPUs)
- teamredminer-v0.7.21 (Improved Ethash probability for high (4078-4080MB) ethash 4GB capped allocation running stable over time)


[moderator's note: consecutive posts merged]

[Lucky - Luciano]

Greeting. I installed Simplemining Linux s on the HDD and I only have about 16 MH / s hashrat per graphics card for Ethereum. I have 6 graphics cards in the miner (1 X RX580 8 GB, 4 X RX580 4 GB and 1 X RX470 4 GB). Even an 8 GB graphics card hashes only 16 MH / s. All miners have such a weak hashrate: Phoenix miner, Team Red miner, Lol miner ..... Does anyone know what the problem is - these are my settings and hashrates:

[tymeksm]

Miners update:
- phoenixminer-v5.4c (Added support for DAG epochs up to 500. Validated support for Nvidia RTX 3090, 3080, 3070, 3060Ti. Add support for the older AMD Linux driver 19.50-1011208. Added new kernels to allow mining on AMD Hawaii cards (R9 390, etc.) with the current and future DAG epochs (even with DAG buffer above 4GB for the 8GB cards))


Miners update:
- gminer-v2.36 (Support extra nonce length up to 6 bytes for Ethash/KAWPOW (now miner will works on f2pool, miningpoolhub and other pools). Added display of fan speed, core clock, memory clock, DAG size, share difficulty for Ethash/KAWPOW. Display power efficienty for cuckoo cycle in milliwatts. Fixed bug with stale job logic on beam and cortex (it will increase hashrate on pool side). Added option to enable/disable caching of dag file (enabled by default, --cache_dag 0/1). Added option to enable/disable share check on CPU for Ethash/KAWPOW (enabled by default, --share_check 0/1))


Update v1299:
- Fixed no GPU data after rig reboot for several dozen seconds.
- Less blinking console info while pause mode on external monitors.
- Fixed SRR cyclic reboot after OS reflash in pause mode
- Improved PhoenixMiner API console - removed some empty lines
- Improved miner start under sudo in some conditions
- Improved display uptime especially during first 1 minute
- Other small fixes and improvements


[moderator's note: consecutive posts merged]

[jakebot]

I'm having a little trouble with getting ETC mining to work on Team Red miner.
I've been mining ETH for a bit on it and after switching i'm getting a crazy amount of bad shares and much lower hash rate.
The config is virtually the same so I'm not sure what I could be doing wrong. I wouldn't think it's my OC as they have worked fine with everything else I have mined. XMR, RVN, ZEC etc...

I'm hoping i'm being an air head and just missing something....?
I'm preparing for ETH DAG EPOC #384

[Metroid]

I'm having a little trouble with getting ETC mining to work on Team Red miner.
I've been mining ETH for a bit on it and after switching i'm getting a crazy amount of bad shares and much lower hash rate.
The config is virtually the same so I'm not sure what I could be doing wrong. I wouldn't think it's my OC as they have worked fine with everything else I have mined. XMR,

ETC is not using ethash anymore, while they are still somewhat similar, there are some notable changes, so you will need to work on it to fix the stale shares and lower hashrate, my recommendation is to get back to default speed and then work you way from there. I myself have a rx 470 and changing it from eth to etc had no changes in hashrate or stale shares but my card has minimal overclock.

[jakebot]

ETC is not using ethash anymore, while they are still somewhat similar, there are some notable changes, so you will need to work on it to fix the stale shares and lower hashrate, my recommendation is to get back to default speed and then work you way from there. I myself have a rx 470 and changing it from eth to etc had no changes in hashrate or stale shares but my card has minimal overclock.

Well there it is. Something stupid I overlooked.  I'll start there and dig in.
I use ethermine (or whatever it's called now) for my pool and it was detected just giving all bad shares.
I run bios modded and overclocked (fairly aggressively though as I pay a flat fee for power) on mostly rx570s with a few stock bios rx-580s and one rx-480.

Thanks Metroid I will dig in more.

[tymeksm]

New SimpleMining beta image:
- SM-5.4.81-8-a20.40-n455.45.01
- Beta image only for AMD RX 6800 GPUs support
- Image is available in download section and in "Advanced commands"


Miners update:
- bminer-v16.4.1 (Support mining ETH on AMD 4G cards via the -ethash-allocation parameter. Improve performance on mining ETH on AMD 4G cards)


Miners update:
- bminer-v16.4.2 (Fix crash in NVIDIA Etherum miner)

[moderator's note: consecutive posts merged]

[alucard20724]

TRM v0.7.22 any time soon?

[tymeksm]

Miners update:
- teamredminer-v0.7.22 (Ethash: Kernel rewrite for Navi - more stable and less power. Slightly reworked init procedure again to address some rigs running better on <= 0.7.18 than >= 0.7.19. Added Claymore compatible API --cm_api_listen)
- gminer-v2.37 (Fixed bug with --proto stratum for ethash mining in v2.36. Fixed mining on kawpow with intensity. Lowered fee on kawpow to 1%)


Miners update:
- nbminer-nebutech-v36.0 (Fix kawpow crash on some GPUs in versions 35.x. Deleted algo: eaglesong, eaglesong_ethash, trb, trb_ethash, hns, hns_ethash, sipc, cuckaroo, cuckaroo_swap. 3 times smaller binary size)
- srbminer-multi-v0.6.1 (cryptonight_xhv kernel small changes, pool side hashrate should be a little higher. Auto setup for cryptonight_xhv is a little more agressive now - if you experience some issues, use --gpu-auto-intensity 1 for lighter settings. Removed parameter --gpu-worksize)


Miners update:
- gminer-v2.39 (Added kernel auto-tuning for kawpow - improves hashrate up to 4% on some cards. Fixed AMD cards detection under linux)

[moderator's note: consecutive posts merged]

[klondike_bar]

I'm pretty sure this isn't possible - but can phoenixminer/TREX/etc be configured to run multiple algorithms (ie: ETH on 8GB cards and KAWPOW on 3GB cards)?

Alternatively, can SimpleMining.net run 2 separate processes on the rig?

[ikicha]

Waiting for updates BMiner 16.4.3
Fix rejected shares for ETH AMD Solvers

[tymeksm]

Miners update:
- bminer-v16.4.3 (Fix bugs with high rejection rates in AMD Ethereum)
- sgminer-fancyIX-v0.7.2 (added optimized neoscrypt bin kernel - 35% faster. Fixed global offset bug in yescrypt)
- srbminer-multi-v0.6.2

[techno8k]

tymeksm or anyone else:

Does anyone know the optimal setting to mine Ethereum on these 3 cards on SimpleMining?

Geforce 1080
Geforce 1080 Ti
Geforce 2080 Ti

The calculator software on some websites say my hashrate should be higher than the one I have. Thanks

[xPETEx]

tymeksm or anyone else:

Does anyone know the optimal setting to mine Ethereum on these 3 cards on SimpleMining?

Geforce 1080
Geforce 1080 Ti
Geforce 2080 Ti

The calculator software on some websites say my hashrate should be higher than the one I have. Thanks

Unfortunately there’s a hardware issue with 1080tis and most older nvidia cards. As the DAG grows over time the hashrate drops. My 1080tis used to get 54mh, now they get around 44. So my guess is you’re seeing older numbers on those calculators.

[tymeksm]

Miners update:
- bminer-v16.4.4 (Fix compatiblity issues with ETH pools that use the ethproxy)
- wildrig-multi-v0.28.3 (added algo phi5)

[BogdanCo]

tymeksm or anyone else:

Does anyone know the optimal setting to mine Ethereum on these 3 cards on SimpleMining?

Geforce 1080
Geforce 1080 Ti
Geforce 2080 Ti

The calculator software on some websites say my hashrate should be higher than the one I have. Thanks

Unfortunately there’s a hardware issue with 1080tis and most older nvidia cards. As the DAG grows over time the hashrate drops. My 1080tis used to get 54mh, now they get around 44. So my guess is you’re seeing older numbers on those calculators.

For 1080ti I use +100->+125 core (depends on the card), Memory +600, PL 210W. I get between 48-50 Mhs. In the past with PL 190W I got the same hashrate, but with the DAG increase you have to adjust from time to time the PL if you want the same hashrate.

[catfish78]

Hello again!

I have a problem with my new rig: 3 x Asus RX470 Mining, 2 x Sapphire RX570 Pulse
Asus cards are going to zero rpm fan mode and after reaching target temperature roaring to 80 - 100%, thats very noisy!
Sapphire cards are at 23 - 26% fan speed below 70C, almost no noise.

How to disable 0 rpm mode and force a minimum fan speed to those Asus cards??