tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
February 04, 2020, 08:28:37 PM |
|
SimpleMiningOS images update: - New image 5.0.21-9-a19.50-n440.44 with fixed Vega slower hashrate in the previous image release.
Now it's working Thanks for the update. I see a slight rash rate improvement for Vega. ~1Mh/s for a 6 card rig. Nice! OK fine. We have still some bug with RX5500 that shows wrong core MHz (but it is working fine beside that) Thx for info Bogdan.
|
|
|
|
thedreamer
Legendary
Offline
Activity: 1694
Merit: 1002
Go Big or Go Home.....
|
|
February 05, 2020, 03:52:29 PM |
|
Hi, is there a way to mix rx500 series and rx 5700 series on the same rig?
|
Go Big or Go Home.
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
February 05, 2020, 05:41:01 PM |
|
Yes, why not ? Use image from RX5700 but the RX500 will be a little bit slower.
|
|
|
|
thedreamer
Legendary
Offline
Activity: 1694
Merit: 1002
Go Big or Go Home.....
|
|
February 05, 2020, 08:15:38 PM |
|
Yes, why not ? Use image from RX5700 but the RX500 will be a little bit slower.
I downloaded the latest image and when I run it on a rig with 9x 4/5xx GPU's and one RX 5700, it ONLY sees the RX 5700 and runs that. No other GPUs are found.
|
Go Big or Go Home.
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
February 05, 2020, 08:23:40 PM |
|
Yes, why not ? Use image from RX5700 but the RX500 will be a little bit slower.
I downloaded the latest image and when I run it on a rig with 9x 4/5xx GPU's and one RX 5700, it ONLY sees the RX 5700 and runs that. No other GPUs are found. And when you unplux RX5700 then it sees those RX400/500 ? We will check that
|
|
|
|
thedreamer
Legendary
Offline
Activity: 1694
Merit: 1002
Go Big or Go Home.....
|
|
February 05, 2020, 08:31:50 PM |
|
Yes, why not ? Use image from RX5700 but the RX500 will be a little bit slower.
I downloaded the latest image and when I run it on a rig with 9x 4/5xx GPU's and one RX 5700, it ONLY sees the RX 5700 and runs that. No other GPUs are found. And when you unplux RX5700 then it sees those RX400/500 ? We will check that Yup. Although I did not try the rig without the RX5700 on the new image. I will do that now and get back to ya. Thank you for the responses brother. Back from overseas finally and getting back into mining again.
|
Go Big or Go Home.
|
|
|
thedreamer
Legendary
Offline
Activity: 1694
Merit: 1002
Go Big or Go Home.....
|
|
February 06, 2020, 04:08:26 AM |
|
Ok, Tried it. The new image works fine with the rx500 series and rx400 series GPU's but when an rx5700 is installed, it only detects the rx5700 and none of the other gpu's. Hashes fine on the rx5700. Weird.
|
Go Big or Go Home.
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
February 06, 2020, 09:07:35 AM |
|
Miners update: - bminer-v16.0.4 (Improve the performance of Cuckaroo29m. Reduce the rejection rate of the Cuckaroo29m)
|
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
February 06, 2020, 03:30:48 PM |
|
Ok, Tried it. The new image works fine with the rx500 series and rx400 series GPU's but when an rx5700 is installed, it only detects the rx5700 and none of the other gpu's. Hashes fine on the rx5700. Weird.
Can You try phoenixminer and claymore as well ? What do you mean by detects only RX500. Does the miner sees only one of them or our system sees one of two cards in RigDetailed View ? It would be great if you will write to us at admin@simplemining.net so we could login to your rig and check exactly how system sees those GPUs. Can you leave one rig with both cards and tell us which is it (every info via email). We tested this and miner was mining on both but cliinfo showed only RX5700.
|
|
|
|
thedreamer
Legendary
Offline
Activity: 1694
Merit: 1002
Go Big or Go Home.....
|
|
February 06, 2020, 08:59:13 PM |
|
Ok, Tried it. The new image works fine with the rx500 series and rx400 series GPU's but when an rx5700 is installed, it only detects the rx5700 and none of the other gpu's. Hashes fine on the rx5700. Weird.
Can You try phoenixminer and claymore as well ? What do you mean by detects only RX500. Does the miner sees only one of them or our system sees one of two cards in RigDetailed View ? It would be great if you will write to us at admin@simplemining.net so we could login to your rig and check exactly how system sees those GPUs. Can you leave one rig with both cards and tell us which is it (every info via email). We tested this and miner was mining on both but cliinfo showed only RX5700. The software running rig-side shows 1 GPu found, even though i have 10 with one rx5700. It only hashes on the 5700, but the website shows 10gpus found, only 1 running. Same even when i remove all tweaks and use default settings from the gpus. When i remove the rx5700, everything mines as normal. I'm using claymore, but its not even trying to mine on the others when the 5700 is plugged in. Tried different pcie plug and even with less gpus. No difference.
|
Go Big or Go Home.
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
February 06, 2020, 09:29:42 PM |
|
When i remove the rx5700, everything mines as normal. I'm using claymore, but its not even trying to mine on the others when the 5700 is plugged in.
Tried different pcie plug and even with less gpus. No difference.
Check this out: https://download.simplemining.net/photos/2020-02-06_22-27-54.pngPlease try using phoenix miner. I think that claymore is the problem.
|
|
|
|
thedreamer
Legendary
Offline
Activity: 1694
Merit: 1002
Go Big or Go Home.....
|
|
February 07, 2020, 12:48:48 AM |
|
That did it! Phoenixminer 4.9c works! All 10GPUs 300MH ETH.. woot. TY
|
Go Big or Go Home.
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
February 07, 2020, 07:17:55 AM |
|
That did it! Phoenixminer 4.9c works! All 10GPUs 300MH ETH.. woot. TY
Yeah. I guess we can just wait for Claymore to upgrade his miner and add support for RX5700 Thanks for tesing
|
|
|
|
kemo6600
Member
Offline
Activity: 130
Merit: 10
|
|
February 07, 2020, 07:23:03 AM |
|
What Numbers you are getting now with RX5700/5700 XT in ETH , MH and W so we can check if we should start replacing old 570/580 Cards
|
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
February 07, 2020, 09:00:55 AM |
|
What Numbers you are getting now with RX5700/5700 XT in ETH , MH and W so we can check if we should start replacing old 570/580 Cards
Something like 53.58 MH/s on RX5700XT 8GB. Not sure about wattage but it should be between 120-140watts i guess.
|
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
February 07, 2020, 11:36:05 AM |
|
Miners update: - nanominer-v1.8.0 (x4 - x5 performance improvements for RandomHash2 algo (Pascal) since version 1.7.1. Added Cortex support for AMD Radeon RX 570 16 GB cards. +30% RandomHash2 (Pascal) optimizations for some of CPUs since version 1.7.3)
|
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
February 07, 2020, 12:03:23 PM |
|
SimpleMiningOS image updates: - Updated image SM-4.17.19-20e-a18.20-n430.40 to SM-5.0.21-9-a18.20-n430.40 with kernel series 5.x, newest AMD kernel driver and firmwares. This image is most stable and fastest image for GPUs: AMD RX 370/380/390/470/480/570/580 and all NVidia (except GTX 1650/1660)
|
|
|
|
thedreamer
Legendary
Offline
Activity: 1694
Merit: 1002
Go Big or Go Home.....
|
|
February 07, 2020, 12:17:05 PM |
|
On an Rx5700 (non XT), default I got 51mh@124watts. Downclocked (1200/925@830mv)I get 49.4mh@101watts.
|
Go Big or Go Home.
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
February 07, 2020, 02:20:13 PM |
|
OK i made some test for your guys. Setup: 2x RX5700XT core: 1325 mem: 925 uv: 775 Whole set takes for real from wall 267 watts. System takes about 20 watts so 125 watt takes each card (real power usage) I see that we need to adjust our calculations regarding this card
|
|
|
|
BogdanCo
|
|
February 08, 2020, 08:40:57 AM |
|
Hi Tytanick, Do you know why I can't reflash a 6x1080ti rig with the newest image? I have the below error: [INFO] [2020-02-08T09:25:07+01:00] Accepted share [INFO] [2020-02-08T09:25:10+01:00] Accepted share [INFO] [2020-02-08T09:25:19+01:00] Received new job 798574119 [INFO] [2020-02-08T09:25:21+01:00] [GPU 0] Speed: 1.70 G/s Fidelity 1.037 Temp: 55C Fan: 40% Power: 206W 0.01 G/J [INFO] [2020-02-08T09:25:22+01:00] [GPU 1] Speed: 1.68 G/s Fidelity 0.910 Temp: 54C Fan: 33% Power: 149W 0.01 G/J [INFO] [2020-02-08T09:25:22+01:00] [GPU 2] Speed: 1.70 G/s Fidelity 0.986 Temp: 55C Fan: 39% Power: 227W 0.01 G/J [INFO] [2020-02-08T09:25:22+01:00] [GPU 3] Speed: 1.70 G/s Fidelity 0.945 Temp: 54C Fan: 39% Power: 150W 0.01 G/J [INFO] [2020-02-08T09:25:22+01:00] [GPU 4] Speed: 1.68 G/s Fidelity 0.961 Temp: 54C Fan: 43% Power: 149W 0.01 G/J [INFO] [2020-02-08T09:25:22+01:00] [GPU 5] Speed: 1.70 G/s Fidelity 0.988 Temp: 55C Fan: 39% Power: 147W 0.01 G/J [INFO] [2020-02-08T09:25:22+01:00] Total 10.16 G/s Accepted shares 822 Rejected shares 11 #################################### SimpleMining OS reflasher Download main program... Running main program... Main program started. Using Your email from rig config: xxxxxx@yahoo.com Stopping mining process... Error: not enough memory. At least 4GB RAM is required I do have 4 Gb Ram...
|
|
|
|
|