[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[tymeksm]

Miners update
- lolminer-v1.39 (Added support for mining TON. AMD cards since GCN1 and Nvidia cards Maxwell and newer generation are supported. Added support for mining Ubiq. Added support for routing your stratum traffic through a socks5 proxy server. Added timeout for DOH requests, so they can no longer hang indefinitely. Fixed ethash support for RX 5500 series GPUs on more recent drivers)

[Metroid]

Miners update
- lolminer-v1.39 (Added support for mining TON. AMD cards since GCN1 and Nvidia cards Maxwell and newer generation are supported. Added support for mining Ubiq. Added support for routing your stratum traffic through a socks5 proxy server. Added timeout for DOH requests, so they can no longer hang indefinitely. Fixed ethash support for RX 5500 series GPUs on more recent drivers)

I went to test this on simplemining and it says, "/root/miner/lolminer-v1.39/lolMiner: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.25' not found (required by /root/miner/lolminer-v1.39/lolMiner)" error, by the way pool syntax for this in simplemining is? nothing on the notes. Anyway to give the full command line syntax for this miner to work with TON?

[tymeksm]

Miners update
- lolminer-v1.39 (Added support for mining TON. AMD cards since GCN1 and Nvidia cards Maxwell and newer generation are supported. Added support for mining Ubiq. Added support for routing your stratum traffic through a socks5 proxy server. Added timeout for DOH requests, so they can no longer hang indefinitely. Fixed ethash support for RX 5500 series GPUs on more recent drivers)

I went to test this on simplemining and it says, "/root/miner/lolminer-v1.39/lolMiner: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.25' not found (required by /root/miner/lolminer-v1.39/lolMiner)" error, by the way pool syntax for this in simplemining is? nothing on the notes. Anyway to give the full command line syntax for this miner to work with TON?

Please reflash your rig using newest SimpleMining.Net image and if problem still occur that write email to admin@simplemining.net with full command line options and your rig name that has this problem and we will check what the reason is of this issue.


Miners update
- srbminer-multi-v0.8.8 (Added socks5 proxy support. Added algorithm argon2d_16000. Performance increase on heavyhash for Vega up to ~13%. Performance increase on argon2id_chukwa2 for RDNA/RDNA2 up to ~12% & lower power consumption. Performance increase on argon2d_dynamic for RDNA/RDNA2 GPU's up to ~45% & lower power consumption. If using --multi-algorithm-job-mode 3 miner now auto sets --max-no-share-sent to 45 minutes if no other value was set. Rewrote restarting mechanism so it shouldn't spawn a new process anymore on miner auto restart. Minor bug fixes)

[jgonzi]

Miners update
- lolminer-v1.39 (Added support for mining TON. AMD cards since GCN1 and Nvidia cards Maxwell and newer generation are supported. Added support for mining Ubiq. Added support for routing your stratum traffic through a socks5 proxy server. Added timeout for DOH requests, so they can no longer hang indefinitely. Fixed ethash support for RX 5500 series GPUs on more recent drivers)

I went to test this on simplemining and it says, "/root/miner/lolminer-v1.39/lolMiner: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.25' not found (required by /root/miner/lolminer-v1.39/lolMiner)" error, by the way pool syntax for this in simplemining is? nothing on the notes. Anyway to give the full command line syntax for this miner to work with TON?

Could you add https:// before the url of the pool that should make it work. I have seen some other miners with Simplemining running TON and I suppose it could be that. Unless you are in the toncoinpool Stratum

[Metroid]

Please reflash your rig using newest SimpleMining.Net image and if problem still occur that write email to admin@simplemining.net with full command line options and your rig name that has this problem and we will check what the reason is of this issue.

Thanks, re-flashing with a new image fixed the issue.

[jgonzi]

Please reflash your rig using newest SimpleMining.Net image and if problem still occur that write email to admin@simplemining.net with full command line options and your rig name that has this problem and we will check what the reason is of this issue.

Thanks, re-flashing with a new image fixed the issue.

best solution sometimes 

[tytanick]

Dashboard update
- Fixed iOS Home Screen shortcut. You can now open RigList in Safari and add shortcut to iOS home screen.
- Fixed Bash command inability to send command after pasting script from clipboard
- Fixed badge bug with invalid online/offline status „online <5s ago”
- Fixed charts view covered by range selection plus range selection is now transparent
- Adjusted filters view on mobile
- Visual changes in deposit fee
- Refactoring dashboard code removed CoreUI to make dashboard faster on slower devices

Please reflash your rig using newest SimpleMining.Net image and if problem still occur that write email to admin@simplemining.net with full command line options and your rig name that has this problem and we will check what the reason is of this issue.

Thanks, re-flashing with a new image fixed the issue.

best solution sometimes 

Yeah, this sometimes is happening when miner was compiled using too new or too old version than system has.
Reflashing is usually good idea when something strange is happening but sometimes it is better to stay with older version like polaris GPUs and 18.20 drivers which are like 0,5% faster
Also sometimes new images can cause problems like incompatibility issues that are hard to find by our team due to so many configurations.
So always remember to flash one, then few rigs in batches and not all at once

[tymeksm]

Miners update
- miniz-v1.8y4rc2-beta (Added support for RTX 3070 Ti and 3080 Ti LHR GPUs on ethash. Improved performance for mining locked LHR GPUs while mining ETH. Improved --tune option for better GPU tuning. Small improvements for 3060 on 144,5)


Miners update
- lolminer-v1.40 (Improved performance of TON  up to 1.5%. Lowered TON fee to 1%. Increased TON https mining polling interval for less server load. Improved blocking preventing mechanisms. Miner can now communicate with stratums using websockets. Significantly improved TON mining pool compatibility. Added a new parameter --ton-mode to toggle between modes. Fixed bug with TON https polling causing random crashes on some machines. Fixed bug with TON: defect shares were not displayed in stats overview. Fixed bug with TON OpenCL back end: miner did trigger watchdog when a GPU was halted and waiting for work)


Miners update
- danila-miner-v2.3.1

[tymeksm]

Miners update
- lolminer-v1.41a (EMERGENCY UPDATE! Users running version 1.40 are asked to immediately switch to the latest version 1.41a because of DDoS issue caused by 1.40.
  Re-wrote the complete HTTPS connection stack in the TON pool connector, so the connections can be reused for a significant lower load on the pools. Improved performance of Nvidia TON kernels, especially significant on Turing based GPUs. Added experimental TON kernels for Nvidia Fermi and first generation Kepler GPUs. Altered fee pools of TON to distribute better to different mirrors to reduce load on single ones. Implemented a system that can detect connection blocking in TON and will automatically choose alternative mirrors for the known TON pools in case of problems. Users on toncoinpool.io stratum mode (--ton-mode 3) can now specify a worker name via --worker or by adding a worker name to their wallet separated by a dot. Other TON mining pool protocols will ignore both, because most pools do not accept worker names send. Fixed bug: an extra "/" at the end of a https:// or wss:// address will no longer cause the connection to fail. Fixed bug: Infinite cycling of TON connection attempts in case of attempts to swap to fail-over pools. Fixed bug: Failed DNS resolve ending in a miner crash. Fixed: Miner now also does load balancing on error 1020 - this would have resolved itself once enough users swapped to 1.41 from buggy older versions, but might speed up pool recovers process)


Miners update
- lolminer-v1.41b (Fixed a bug with seed handling, that caused a high rate of defect shares on https://pool.tonuniverse.com in --ton-mode 4. Fixed a bug with https://other.tonuniverse.com pool in --ton-mode 1 that caused the miner to reconnect after a share was submitted)

[tymeksm]

Miners update
- lolminer-v1.42 (Reduced Ton pool job polling intervals by default for reduce stales and rejected. Added Ton solo mining mode. Use --pool SOLO or --ton-mode 5 to use it. In this mode miner will get giver seeds and difficulty from the contracts directly from the public API and submit a found solution directly to the giver to pay you. During this mode the "Pool hashrate" and the "best share statistics" will show data based on an internal difficulty of about 4.4Th. Every submitted share is equal to a submitted challenge solution to the network. Added ability to lock the memory clock on Nvidia RTX 3000 series --mclk, that will be only effective for TON mining at 810 value (requires admin/sudo permissions and Nvidia driver 470 series or newer). Made the horizontal stats standard. You still can get back to old vision via adding --vstats to your parameter set. Fixed bug in Ton solver back ends, that rarely caused (double) defect shares to appear. Fixed bug in statistics causing GPU number not to be right aligned in classical vertical stats. Fixed some general issues where Ton pools did not get connected)

[tymeksm]

Miners update
- teamblackminer-v1.38 (Since v1.35: Faster speed on AMD cards. Fix dag validation error on startup. Removed buffer error/crash in buffered console output. Check and correct kernel parameter on illegal user input. Improved kernel autotune by letting it run longer. Fixed jumping hashrate bug on AMD. Fix crash on ultra-low difficulty. Fix shares per minute calculation. Fix invalid shares after re-connecting to pool.  Improve dag creation parallelization on nvidia multicard rigs. Fix dagintensity to on the P104. Removed invalid shares on the hiveon pool. Improved the LHR detection. Improved the default xintensities. Fix error on block change for AMD. Fix error on reconnect for AMD)


Update v1324
- Added support for BC-160 Memory Overclocking and fixed GPU name
- Updated nvflash to version 5.728.0 (Now supports GeForce RTX 3090, 3080, 3070, 3060 Ti, 3060, 2080 Ti, 2080, 2070, 2060, 1660, 1650, 1080 Ti, 1080, 1070, 1060, 1050 and many more)
- Disk writes speedup (most noticeable change on slow pendrives in faster new miner running, faster updates)
- Added CUDA 11.5 definition


SimpleMining images update
- SM-i029-5.10.60-1-a20.40-n495.46 (New beta image with improved AMD 5000/6000 stability and newest NVIDIA driver with CUDA 11.5 support)

[tymeksm]

Miners update
- teamblackminer-v1.39 (Improved Stale checker/estimates AMD. Fix reject bug on ethproxy pools. Fix ETH+ZIL on LHR rigs)


Miners update
- teamblackminer-v1.40 (Fix build issue on AMD rigs. Tiny improvement in the cuda kernel)

[tymeksm]

Miners update
- Added bzminer-v7.1.4 (mining Ethash, Etchash, Kawpow, Olhash, Alephium on AMD and NVIDIA. API support will be added in near future)
- teamblackminer-v1.41 (Fix disconnect problem at nanopool.org and crazypool. Fix crash in --list-devices on opencl. Flipped the gpu order for AMD gpu's. Fixed an issue with BTC and Nano payouts on 2miners pool. Added more pools)


Miners update
- bzminer-v7.1.5 (Network stability updates. Correction to Alephium mining algorithm (caused some invalid solutions). Showing pool latency for rejected shares. Fixed sort order of GPUs)
- teamblackminer-v1.42 (Fixed gpu timeouts on AMD rigs)


Miners update
- bzminer-v7.1.6 (Displaying BzMiner version in corner of output table. Added seconds to date/time output. Please use option "Run As Root" in SimpleMining GroupConfig in order to work proper this miner. Without this option miner may not detect GPUs)

[tymeksm]

Miners update
- gminer-v2.75 (Major performance improvement for LHR GPUs on Ethash. Improved auto-tuning for LHR GPUs. Changed fee to 1% on Ethash)

[tymeksm]

Miners update
- bzminer-v7.2.0 (Fixed "Out of Memory" ethash/etchash bug on Nvidia cards with 8gb or less. Fixed unstable network issues causing BzMiner to crash or freeze. Fixed Alephium auto protocol detection. By default BzMiner uses protocol `stratum+tcp:\" if not specified. LHR detection disabled for core only algos. Added "no_work_timeout" and "test_iteration_ms" to pool configs. Logs now rotate when BzMiner starts by default (set "clear_log_file" to true to overwrite log file on startup). Added new column "%", showing percent of accepted shares. Fixed GPU sort order for Pool table. Showing "--" for pool latency when no submitted share response has yet been received. Alephium protocol updates. Added "workerName" to "alph_submitHashrate". Added "client.reconnect" method handler)
- teamblackminer-v1.43 (Fix fan speed percent and missing stats for some cards on AMD. Added 7 new cuda kernels that can give a speedup on some cards. (run autotune mode to check))
- teamredminer-v0.9.1 (Added --eth_ignore_abort_fail to disable intensity adjustment due to failed aborts. Added better handling of dead gpu logging in corner cases that previously didn't mention a specific gpu)


Miners update
- bzminer-v7.2.1 (Fixed reconnect loop for some Alephium pools. Fixed log rotation bug)

[tymeksm]

Miners update
- teamblackminer-v1.45 (Speedup RTX 3xxx series, NON-LHR/LHR +1-2%. Rewrote the dag generator to work better on high oc (3060ti /3070). Fixed empty CUDA stats when running with a selection of the gpus. Fixed a bug in the dag validation code for cuda.70). Fixed cuda stats in mixed card rig and missing stats in AMD. Fixed bug in th LHR detector, sometimes the program didn't detect correctly. Improved default setting for the LHR mode)


Miners update
- srbminer-multi-v0.8.9 (Dataset for 'autolykos2' algorithm is now created differently, so hopefully video driver won't time-out on slower gpu's. Removed algos eaglesong/kadena/bl2bsha3/phi5. Minor bug fixes)

[tytanick]

Dashboard update
- NEW filter that can show rigs that went offline within last X hours or days instead of showing all offline
- Refactoring and other small improvements

[Wotan Wipeout]

Thanks for the fine work to you and your team!

I have a little problem (well not a real problem, but you will understand it...).
Mining with lots of GPUs (>6 on each rig) the display of the miner (GMiner i use)
shows the details in 2 rounds. While mining with only 4 GPUs i an see rejected shares from
the first display, and the temp and core display comes in the 2. display.
On my rigs with much more GPUs, i can only see the 2. display.
So its nearly impossible to see the 1. display with rejected shares.

Do you see any possibility to change the display? Or add rejected shares of each GPUs somewhere?

Thanks again

Wotan

[tytanick]

Thanks for the fine work to you and your team!

I have a little problem (well not a real problem, but you will understand it...).
Mining with lots of GPUs (>6 on each rig) the display of the miner (GMiner i use)
shows the details in 2 rounds. While mining with only 4 GPUs i an see rejected shares from
the first display, and the temp and core display comes in the 2. display.
On my rigs with much more GPUs, i can only see the 2. display.
So its nearly impossible to see the 1. display with rejected shares.

Do you see any possibility to change the display? Or add rejected shares of each GPUs somewhere?

Thanks again

Wotan

Adding rejected shares is the way to go here.
Right now the Rig Details view is redesigned and it will be implemented soon.
After that i want to add accepted and rejected shares becasue looking into console is not the way we should go
There is warning if you are getting too many rejected shares but it works only with certain miners. And it probably does not show this info per gpu.
I will verify that for gminer.

 Withj gminer we are collecting shares and they are only seen when You are in RigList and hover mouse on hashrate.
You should see them.

Added:
I am planning to gather per each GPU those shares and present them in new interface but it will require more time to adjust all miner programs API parsers.
Please also send me screenshot with how do You see the console to admin AT simplemining DOT com with info to pass this email to Tytus.

[Wotan Wipeout]

Email with screenshot send.

Thx