[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[Wotan Wipeout]

Thx for the Tipp, but i will go full watercooled.
Atm ETH is the most profitable coin, followed by octopus algo.
I want to be ready for power hungry coins and my 3080 Supreme X have a big powertarget.
Cooling a few GPUs with over 400 Watt each wouldnt be possible on a closed rig.

I have never seen such monstrous graphic cards....

[tytanick]

Thx for the Tipp, but i will go full watercooled.
Atm ETH is the most profitable coin, followed by octopus algo.
I want to be ready for power hungry coins and my 3080 Supreme X have a big powertarget.
Cooling a few GPUs with over 400 Watt each wouldnt be possible on a closed rig.

I have never seen such monstrous graphic cards....

Yeah, they are big
OK

[BogdanCo]

Does anyone know how Fan control work for RTX 3070?
Are there any command? Sliders does not work.

Okay, case solved. If someone run into the same problem. Mixed rigs are not supported, mixed rigs does not mean amd and nvidia in the same rig, it means different GPU's are not supported: 3070 with 2060 etc.
I had 3070 and 2060 super in same rig, fan control does not work, if i removed 2060 super, fan control works as a charm.

I have the same issue with 3070 mixed with 1080ti...

All nvidia fanspeed issues are fixed right ? (except the one that one fan is not spinning in 3xxx series in some models) ?

Are fixed now, thanks!

[tymeksm]

Miners update:
- verthashminer-v0.7.2 (Fixed nonce range calculation for GBT)


SimpleMining images update:
- SM-5.4.105-1-ub18-a20.40-n460.56-v1305 (Updated official SimpleMining image with supporting more 2.5 Gbit network adapters in newest motherboards. Image available in download section and via AdvancedCommands)


Miners update:
- t-rex-v0.19.12 (Ethash - add ethproxy (getwork) mode. Fix API security vulnerability that allows creating / modifying PC files when API is bound to 0.0.0.0 in --api-read-only mode. Fix No connection error. FIx --watchdog-exit-mode doesn't always reboot the PC in r mode)


Miners update:
- nanominer-v3.3.2 (Autolykos performance improvements about 40% for AMD Vega family (RX Vega 56, RX Vega 64, Radeon VII)


Miners update:
- nbminer-nebutech-v37.0 (new algo ERGO for Nvidia GPUs. Delete algo: bfc cuckarood for Nvidia, octopus for AMD. Fix octopus support CFX new address format. Fix clBuildProgram error issue on Vega for versions 35.0 - 36.1. Disable AMD iGPU by default, can be enabled back by setting --enable-igpu. Other minor bug fix, improve overall stability)


Miners update:
- srbminer-multi-v0.7.1 (Improvement on autolykos2. Fixed crash on panthera on non-ryzens. Minor bug fixes)


SimpleMining images update:
- New BETA image with AMD RX 6700 support - SM-5.4.107-1-ub18-a20.40-n460.67

[moderator's note: consecutive posts merged]

[tf2addict]

simplemining.net is down?  Does this affect mining?

[S780]

wow first time simplemining is crashed...(((

[Dragstar]

Is it hacked? can’t log in to web site

[tytanick]

Currently there is problem in our datacenter in Amazon AWS. We are fixing it.
Our Redis cluster is having problems.
Rigs are mining as usual. Dashboard is unavailable.

The problem is solved for now but our Hosting operator is working with Amazon AWS Support to find out why Redis cluster broke itself.

wow first time simplemining is crashed...(((

Very first from 3 years yes.

[tymeksm]

Miners update:
- sgminer-fancyIX-v0.7.4 (Added Navi support for groestlcoin. Aadd gfx803 and gfx900 bin kernel for groestlcoin)
- teamredminer-v0.8.1.1 (Minimal one-line update: device id added for 6700XT. No need to upgrade for other users)


Update v1307:
- Added OCTOMINER and MINERDUDE all in one mining rack cases support. Integrated OLED display in case provide most important details: rig name, IP number, miner name, hashrate, power usage, temp, fan. Watchdog works after enabling it in rig options (SRR Watchdog enable to ON). Case fans can be adjusted to certain % using advanced overclocking in rig options.
- Added support for cheap USB watchdogs, v3.2 with black board and v5.0 with red board


[moderator's note: consecutive posts merged]

[tytanick]

SRRv2 firmware update
We released new firmware v1.5 for SRRv2 and new Tool that fixes problem with connection between SRRTool and SRRv2 after windows update. FYI SRRv2 are still out of stock.

[tymeksm]

Miners update:
- nbminer-nebutech-v37.1 (Fix ergo high reject ratio on 10 series Nvidia GPUs. Fix ergo pool compatibility. Recommend miners with p106-90 & 1060 3G to mine ERGO, hashrate will be increased significantly with -mt option)


Miners update:
- gminer-v2.49 (Improved DAG generation, now miner generates valid DAG in extremal OC modes. --safe_dag option allows you to choose a way to DAG generation. Improved memory tweaks(fixed problem with possibly broken DAG on epoch change)


Miners update:
- t-rex-v0.19.14 (Octopus minor performance improvements for 16 series GPUs. Ethash, Etchash - add --validate-shares parameter to enable share validation and display share difficulty. Fixed memory tweaks have no effect on some 1060 cards. Fixed miner fails to start after Linux kernel update. Fixed API invalid stats if power usage reporting is not supported. Various UI fixes. Since this version t-rex miner package contains script named reboot.sh, that can be used for example with option --script-crash for rig reboot during miner/gpu issues detected by t-rex miner itself. This script also send some logs to dashboard just before rebooting rig)

[moderator's note: consecutive posts merged]

[tytanick]

Upcoming ....

https://www.youtube.com/watch?v=rUV8XCBRPUw

[Pericle13]

Upcoming ....

https://www.youtube.com/watch?v=rUV8XCBRPUw

Wow it looks efficient and smooth.
I like the all in view and easyness of changing things.

Please consider also an old request to you, to include into the main dashboard the temperatures of ALL GPUs, not only max temp.
GPUs temperatures are one of the critical indicators miners monitor and look into.

Maybe others can hop on to endorse this, or better, you can use the "Vote feature" in the smos menu and see the miners feedback directly.

Great preview anyway, keep up the good work.

[tytanick]

Upcoming ....

https://www.youtube.com/watch?v=rUV8XCBRPUw

Wow it looks efficient and smooth.
I like the all in view and easyness of changing things.

Please consider also an old request to you, to include into the main dashboard the temperatures of ALL GPUs, not only max temp.
GPUs temperatures are one of the critical indicators miners monitor and look into.

Maybe others can hop on to endorse this, or better, you can use the "Vote feature" in the smos menu and see the miners feedback directly.

Great preview anyway, keep up the good work.

Thx for suggestion. I will write it down.

[tymeksm]

Miners update:
- bminer-v16.4.6 (Improve performance for Conflux on Turing/Ampere GPUs. Improve energy efficiency for Ethereum on Polaris GPUs)
- gminer-v2.50-beta (Improved beamhash performance +2%. Improved cuckatoo32 performance +5%. Added display of GPU model in statistics table. Added --worker parameter to specify worker name for ETH pools thats doesn't support wallet.worker notation. Added option to display date in log --log_date. Added option to log stratum --log_stratum. Display epoch and block number on new job. Updated Web UI for --api. Uses --proto stratum for NiceHash by default
bug fixes and stability improvements)
- nanominer-v3.3.3 (Faster dataset creation for Ergo (autolykos2). Added zombie mode for Ergo on 2 Gb GPUs Nvidia and AMD. Fixed issues with shardpool (Zilliqa))



SimpleMiningImager update:
- SimpleMiningImager-v5.0 (Based on new linux kernel with more hardware support. Faster flashing process. Removed GUI blinking screen effect. Fixed issue with reboot caused by kernel panic on flash very slow pendrives. Improved responibility of progress bars. Fixed progress bar freeze at 99% with waiting for other slower devices to finish work.)


Miners update:
- gminer-v2.50 (Official stable 2.50 release. Improved beamhash performance (~+2%). Improved cuckatoo32 performance (~+5%). Added display of GPU model in statistics table. Added --worker parameter to specify worker name for ETH pools thats doesn't support wallet.worker notation. Added option to display date in log (--log_date). Added option to log stratum (--log_stratum). Display epoch and block number on new job. Updated Web UI for --api. Uses --proto stratum for NiceHash by default. Removed algorithms: VDS, BFC. Bug fixes and stability improvements)
- xmrig-v6.11.1 (Improved DNS subsystem and added new DNS specific options. Optimized cn-heavy algorithm. Fixed mining job creation sequence. Don't use RandomX JIT if WITH_ASM=OFF. Removed useless code for cryptonight algorithms. Fixed broken coin setting functionality)


Miners update:
- lolminer-v1.25 (Added a real Cuda back-end for better Nvidia GPU support on Ethash. Supports Maxwell to Ampere GPU generations. Two different mining kernels. Use --mode a (faster) --mode b (better energy efficiency) to select between the two. The selection can be done per card via a comma separated list. In mixed system select 'a' for skipping over the AMD cards. Both kernel modes need less energy and perform better then in 1.24a. Reduced internal latency for less stale shares. Reduced CPU load when mining with Nvidia cards. ZIL cache feature fully supported (and stable). Temperature stop & Zombie mode is currently not supported. Added Ethash, Beam Hash III & Cortex kernels for RX 6700. The Ethash stratum interface will now try to run up to three attempts of reconnecting before switching the stratum mode. Fixed "Warning: index out of bounds" error when switching from ETHPROXY to ETHV1 stratum mode. This might solve problems with some pools on connection loss)


Miners update:
- nanominer-v3.3.4 (Faster dataset creation for Ergo on AMD RX 4xx and 5xx series (autolykos2 algorithm))


Miners update:
- gminer-v2.51 (Fixed bug with AE mining and bug with worker name appeared in 2.50)
- srbminer-multi-v0.7.2 (Added algorithm heavyhash (oBTC - Optical Bitcoin), fee 2.5%. Dataset creation for autolykos2 on ellesmere GPU's faster ~3%. DevFee for verthash lowered to 1%. Parameter --disable-workers-ramp-up changed back to --enable-workers-ramp-up, so default value of ramp-up is now disabled. Api doesn't report 0 h/s anymore while creating dataset for autolykos2. Added parameter --max-no-submit-responses. Minor bug fixes)
- t-rex-v0.20.0 (Remove old and rarely used algorithms (x25x, x16r, etc). Combine all CUDA builds into a single binary. (UI) Display maximum share difficulty if --validate-shares is set. --script-epoch-change fails to execute the script when switching to ZIL session when dual mining ETH+ZIL. (API) Inconsistent GPU ordering in API when --pci-indexing is set. Various stability issues)
- xmrig-v6.11.2 (Fixed regression in HTTP parser and llhttp updated)



SimpleMining images update:
- New BETA image
- SM-5.4.107-5-ub18-a20.40-n460.67
- Newest beta AMD driver with 6700 / 6800 / 6900 support
- Fixed issue with RX 6000 series discovers very slowly after rig reboot and not take OC with first miner start after reboot.
- Image is available via Advanced Command for live reflash or in download beta section


Miners update:
- lolminer-v1.26 (Slightly improved performance of Ethash on Pascal/Turing/Ampere GPUs +0.1-0.2 mh. Performance hint for Pascal cards: 1070 and 1080 best use --mode a, 1070ti best use --mode b. Further reduced internal latency in Ethash Cuda back end - less stale shares & CPU load. Added experimental Grin-C32 kernel for Radeon 6700. Fixed bug in Cuda back-end to crash with a segfault on Epoch change (introduced in 1.25). Fixed a bug that Nvidia-GPUs did not start when Cuda Toolkit was not installed (It reported "No OpenCL devices found ..." - which was complete nonsense). Fixed some (rare) potential faults in Beam stratum)

[moderator's note: consecutive posts merged]

[coinbeamer]

Hi, could you include https://github.com/MerlinMagic2018/cpuminer-RKZ/releases/tag/V4.2b to SM?

Its a cpuminer and whether profitable or not, i would like to mine Lightningcash with my cpus inside the rigs ;-)

[tytanick]

Hi, could you include https://github.com/MerlinMagic2018/cpuminer-RKZ/releases/tag/V4.2b to SM?
Its a cpuminer and whether profitable or not, i would like to mine Lightningcash with my cpus inside the rigs ;-)

We do not support CPU mining atm.

[coinbeamer]

:-(

so i have to do it manually via putty

:-(

By the way, why not, its not much work for you i think

[tymeksm]

Miners update:
- t-rex-v0.20.1 (--extra-dag-epoch can now be set per-GPU. Fixed miner crashes when --validate-shares is set. Fixed incorrect share difficulty suffix when diff is greater than 1000G. Fixed (Web UI) Hashrate chart resets at midnight. Fixed manually selected kernel number is not displayed at start up. Fixed incorrect failover pool setup args parsing (multiple -o, and single -u/-p pair causes empty username/pass for failover pools))



SimpleMining images update:
- New BETA image
- SM-5.4.107-5-ub18-a20.40-n465.24.02
- Newest NVIDIA beta driver
- Image is available via Advanced Command for live reflash or in download beta section


Miners update:
- phoenixminer-v5.6a-beta (Added native kernels for AMD RX6700 GPUs. These are faster than the generic kernels and produce a lot less stale shares. Increase the max supported DAG epoch to 550 (should be enough to about Jan 2023)
Full support for setting clocks, fan speeds, voltages, and memory timings of AMD RX6900/6800/6700 cards. The specific hashrate is now shown in the form of kilo hashes per joule (kH/J). Example: if a GPU has hashrate of 30 MH/s with 100W power usage, the specific hashrate is 300 kH/J. Added new command-line parameters -ttj and -ttmem, allowing automatic fan speed control based on GPU hotspot (junction), and memory temperatures respectively. Example: -ttmem 83 will keep the GPU memory temperature at or bellow 83C by increasing the fan speed as necessary. These parameters can be combined with -tt, as well as with each other. These options are supported only on AMD GPUs that report junction and memory temperatures. Added new command-line parameters -tmaxj and -tmaxmem, allowing to decrease the GPU usage when the GPU hotspot (junction), or GPU memory temperatures are above the specified thresholds. These options are supported only on AMD GPUs that report junction and memory temperatures. Added support for AMD Linux drivers 20.50.x. Use this drivers only if you have Polaris or older GPUs, or the latest RX6x000 GPUs. WARNING: Vega, Radeon VII, and Navi GPUs won't work with these drivers! Turn off the zero fan feature on AMD cards whenever a fixed fan speed is used (e.g. -tt -40), or when an auto fan with min fan speed is used (e.g. -tt 63 -minfan 35). To disable this feature, add -fanstop 1 command-line parameter)
- srbminer-multi-v0.7.3 (Small improvement on cryptonight_xhv for some GPU's. Fixed --gpu-off-temperature. Fixed bugs with dual mining ZIL + any other algorithm. Removed parameters --gpu-target-temperature and --gpu-target-fan-speed - use external application instead. Minor bug fixes)


Advanced Command update:
- OS reflash (Fix possible crash on very slow pendrives causing rig reboot before finish reflash process. Fix possible crash if reflash process starting in first 5 minutes after rig start)

[moderator's note: consecutive posts merged]

[angryPep]

Hello!

I started to use SimpleMining yesterday, I really like its simplicity, but there are some points that will decide if I change windows for SMOS:

· Wi-fi is not working for me. I have a TP-Linkg Archer T2U Plus wifi adapter, and Wi-fi is on and configured on SMOS, but it's not getting a valid IP direction, it doesn't connect.

· Any way to configure OC for each GPU? I can only set OC per Rig, that's a bit problematic..
I'm not understanding the OC logics... For my 3070's I set memory to 3200, what gives the desired 8400MHz. The problem is if I reboot it starts some gpu's at 8600MHz, and it crashes at that speed. I have to lower the overclock, and then set it again to 3200 to go back to 8400MHz...

· The 3070 worker is no appearing into ethermine.org dashboard..
It did at beginning, but now that is configured it doesn't. Can I be sure that it's mining 'to' the correct adress? It's extrange because I have another worker with simpleminer that appears in the dashboard, and everything looks correct.

Thank you!