[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[thedue]

So in my first rig that uses SM (5x RX 470) one of the gpus is found but not working correct, any hint?!

1140 1140 300 1256 1220
1750 1750 300 1750 1750

[tytanick]

So in my first rig that uses SM (5x RX 470) one of the gpus is found but not working correct, any hint?!

1140 1140 300 1256 1220
1750 1750 300 1750 1750

try reboot.
Sometimes it happens. I will release in january new kernel which propably will fix this

[xleejohnx]

So in my first rig that uses SM (5x RX 470) one of the gpus is found but not working correct, any hint?!

1140 1140 300 1256 1220
1750 1750 300 1750 1750

try reboot.
Sometimes it happens. I will release in january new kernel which propably will fix this

i can connect to nicehash but all i get is rejected shares on my 470s with your settings
rx 1050 is the version im on

tried a million different settings

when the new claymore is add shoot an email out so i can check it out

its also nice to see emails about updates and future updates

[nowal83]

Hi, really like your build, thanks for the work done, there is a question. Why if I use your OS getting lower by an average of 4 mh than on windows. Use Claymore 7.4 on both OS.
best regard

[thedue]

So in my first rig that uses SM (5x RX 470) one of the gpus is found but not working correct, any hint?!

1140 1140 300 1256 1220
1750 1750 300 1750 1750

try reboot.
Sometimes it happens. I will release in january new kernel which propably will fix this

Ok so I rebooted a dozen times but this ONE gpu stays at 300mhz :/

Can I do something else? Change the pcie slots between the gpus or something like that?! Set the OC to my standard clock settings?!

I´m missing 80-90% hash speed of that card.. it doesn´t make sense to run SM for this rig with that setting.

----

2nd question.

I get the "No screen session found." after every reboot even if I´m on 1050. I have to restart the miner manually to get it working. Could that be? Or do I have to wait a few minutes more to auto start mining?

[citronick]

Problems with dwarf too  

Minergate (Sig) works good so far.

can you send your config ? i never used minergate

EDIT: i fount it:
--no-submit-stale --kernel cryptonight -o stratum+tcp://xmr.pool.minergate.com:45560 -u mail@gmail.com -p x --rawintensity 1008 -w 8 --text-only

sgminer gm working well with dwarfpool for me, using your standard settings and Poloniex XMR account

[tytanick]

Hi, really like your build, thanks for the work done, there is a question. Why if I use your OS getting lower by an average of 4 mh than on windows. Use Claymore 7.4 on both OS.
best regard

If you mean RX OS then you have right.
I will release in january new linux kernel which makes more speed

So in my first rig that uses SM (5x RX 470) one of the gpus is found but not working correct, any hint?!

Ok so I rebooted a dozen times but this ONE gpu stays at 300mhz :/

----

2nd question.

I get the "No screen session found." after every reboot even if I´m on 1050. I have to restart the miner manually to get it working. Could that be? Or do I have to wait a few minutes more to auto start mining?

In windows you also have this one gpu problem or in windows its ok if i am seeing this right ?
If you want i can login to your rig and install newer kernel which most propably solve this problem and will give you better speed.
So if you want to betatest this please write email to admin@simplemining.net. I can give you simple instructions to upgrade kernel.

Propably you should wait like 2-3 minutes, depend on miner, number of gpus etc. It should start automatically.
If you still have problem then i can look at this.

Or meaby i will prepare "special" update and give one command to execute to upgrade kernel version.
If any will be interested then you will need to login via SSH into rig (its pretty simple, i can tell you how), and enter ONE command which will do the rest
I will try to prepare this meaby tomorrow.

[bazsy]

How to replace amd driver?

[thedue]

So in my first rig that uses SM (5x RX 470) one of the gpus is found but not working correct, any hint?!

Ok so I rebooted a dozen times but this ONE gpu stays at 300mhz :/

----

2nd question.

I get the "No screen session found." after every reboot even if I´m on 1050. I have to restart the miner manually to get it working. Could that be? Or do I have to wait a few minutes more to auto start mining?

In windows you also have this one gpu problem or in windows its ok if i am seeing this right ?
If you want i can login to your rig and install newer kernel which most propably solve this problem and will give you better speed.
So if you want to betatest this please write email to admin@simplemining.net. I can give you simple instructions to upgrade kernel.

Propably you should wait like 2-3 minutes, depend on miner, number of gpus etc. It should start automatically.
If you still have problem then i can look at this.

Or meaby i will prepare "special" update and give one command to execute to upgrade kernel version.
If any will be interested then you will need to login via SSH into rig (its pretty simple, i can tell you how), and enter ONE command which will do the rest
I will try to prepare this meaby tomorrow.

In Windows all gpus are working, yepp. Sent you an email. Thanks again for the great support!

[citronick]

sgminer-gm error message:

[13:18:47] Started sgminer 5.5.4-gm
[13:18:47] config.json using Jansson 2.7
[13:18:47] WARNING: GPU_MAX_ALLOC_PERCENT is not specified!
[13:18:47] Probing for an alive pool
[13:19:47] No servers were found that could be used to get work from.
[13:19:47] Please check the details from the list below of the servers you have input
[13:19:47] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers

Any changes happened?

It was all good a while ago.

[citronick]

sgminer-gm error message:

[13:18:47] Started sgminer 5.5.4-gm
[13:18:47] config.json using Jansson 2.7
[13:18:47] WARNING: GPU_MAX_ALLOC_PERCENT is not specified!
[13:18:47] Probing for an alive pool
[13:19:47] No servers were found that could be used to get work from.
[13:19:47] Please check the details from the list below of the servers you have input
[13:19:47] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers

Any changes happened?

It was all good a while ago.

seems problems went away after 10mins or so.... looks like everyone is going dwarfpool -- maybe overloaded

[citronick]

Tytanick - for RX480 8GB cards, what is the optimum values for the raw intesity? -w ?

The defaults you used are:

--rawintensity 1008
-w 8

Problems with dwarf too  

Minergate (Sig) works good so far.

can you send your config ? i never used minergate

EDIT: i fount it:
--no-submit-stale --kernel cryptonight -o stratum+tcp://xmr.pool.minergate.com:45560 -u mail@gmail.com -p x --rawintensity 1008 -w 8 --text-only

sgminer gm working well with dwarfpool for me, using your standard settings and Poloniex XMR account

[Q_R_V]

Tytanick - for RX480 8GB cards, what is the optimum values for the raw intesity? -w ?

Some people report better results with rawintensity 512, w 4, g 2

[citronick]

Tytanick - for RX480 8GB cards, what is the optimum values for the raw intesity? -w ?

Some people report better results with rawintensity 512, w 4, g 2

I think they are right.... 480 cards around 650-700h with i=1008 but 512 constantly exceeds 700-ish...

anyone has more test results on 480s, 390s?

[Beave162]

tytanick,

Could you make that quick adjustment on "WARNING: GPU_MAX_ALLOC_PERCENT is not specified!"

GPU_MAX_ALLOC_PERCENT 100

I'm sure that would help the performance of some cards.

[tytanick]

tytanick,

Could you make that quick adjustment on "WARNING: GPU_MAX_ALLOC_PERCENT is not specified!"

GPU_MAX_ALLOC_PERCENT 100

I'm sure that would help the performance of some cards.

Thx, i had error in script,
i have " GPU_MAX_ALLOC_PRECENT" which is one letter bad

[G_Crypt]

Hi again, good to see the simpleminer progressing well. I have probably asked this in the past but is there any way to integrate a CPU miner? Just seems a bit of a waste to have all these rigs going and the CPU not being utilised to its full potential.

[tytanick]

Hi again, good to see the simpleminer progressing well. I have probably asked this in the past but is there any way to integrate a CPU miner? Just seems a bit of a waste to have all these rigs going and the CPU not being utilised to its full potential.

Hi, it has very low priority like for March atleast.

[thedue]

So in my first rig that uses SM (5x RX 470) one of the gpus is found but not working correct, any hint?!

Ok so I rebooted a dozen times but this ONE gpu stays at 300mhz :/

----

2nd question.

I get the "No screen session found." after every reboot even if I´m on 1050. I have to restart the miner manually to get it working. Could that be? Or do I have to wait a few minutes more to auto start mining?

In windows you also have this one gpu problem or in windows its ok if i am seeing this right ?
If you want i can login to your rig and install newer kernel which most propably solve this problem and will give you better speed.
So if you want to betatest this please write email to admin@simplemining.net. I can give you simple instructions to upgrade kernel.

Propably you should wait like 2-3 minutes, depend on miner, number of gpus etc. It should start automatically.
If you still have problem then i can look at this.

Or meaby i will prepare "special" update and give one command to execute to upgrade kernel version.
If any will be interested then you will need to login via SSH into rig (its pretty simple, i can tell you how), and enter ONE command which will do the rest
I will try to prepare this meaby tomorrow.

In Windows all gpus are working, yepp. Sent you an email. Thanks again for the great support!

Rig is online the whole day + I´m not doing any changes.. so that you can do the kernel update (or send me instructions how to do it).
If you want me to do further tests with the new kernel just let me know what you need.

[G_Crypt]

Hi again, good to see the simpleminer progressing well. I have probably asked this in the past but is there any way to integrate a CPU miner? Just seems a bit of a waste to have all these rigs going and the CPU not being utilised to its full potential.

Hi, it has very low priority like for March atleast.

Thanks, looking forward to it 😀

Claymore ZEC 9.3 is out 😀😀