viperman2
Newbie
Offline
Activity: 29
Merit: 0
|
|
March 23, 2017, 09:13:20 PM |
|
try -ethi 4 or -ethi 3 or -ethi 5
it you don't put in -ethi at all
it sets it to -ethi 8 which may be too intense for the one card
you can go as low as -ethi 1 and as high as -ethi 16
I am at -ethi 12 see my command line
-wd 1 -r 1 -epool stratum+tcp://daggerhashimoto.usa.nicehash.com:3353 -ewal 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.Simple2 -esm 3 -epsw x -allpools 1 -mport -3333 -allpools 1 -dbg -1 -ethi 12
Also try -etha 2, to force rig to use amd-gpu-pro drivers instead of generic drivers. -etha Ethereum algorithm mode for AMD cards. 0 - optimized for fast cards, 1 - optimized for slow cards, 2 - for gpu-pro Linux drivers. -1 - autodetect (default, automatically selects between 0 and 1). Thanks for your output, i added "-etha 2 -ethi 5" to the config row and will check how it will perform this night.
|
|
|
|
ailikun
|
|
March 23, 2017, 09:28:24 PM |
|
Will this work, with r9 390? or only with rx models? For 380 you should use other image, see here: https://simplemining.net/It might work but propably you will have problems. Try it and see for your self. Yeah... but with that image i have lan problems... Ok, ill try to use the rx version.
|
Komuto Herovato is definitely the chief engineer of bfl)
|
|
|
philipma1957
Legendary
Offline
Activity: 4256
Merit: 8551
'The right to privacy matters'
|
|
March 24, 2017, 12:16:59 AM |
|
try -ethi 4 or -ethi 3 or -ethi 5
it you don't put in -ethi at all
it sets it to -ethi 8 which may be too intense for the one card
you can go as low as -ethi 1 and as high as -ethi 16
I am at -ethi 12 see my command line
-wd 1 -r 1 -epool stratum+tcp://daggerhashimoto.usa.nicehash.com:3353 -ewal 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.Simple2 -esm 3 -epsw x -allpools 1 -mport -3333 -allpools 1 -dbg -1 -ethi 12
Also try -etha 2, to force rig to use amd-gpu-pro drivers instead of generic drivers. -etha Ethereum algorithm mode for AMD cards. 0 - optimized for fast cards, 1 - optimized for slow cards, 2 - for gpu-pro Linux drivers. -1 - autodetect (default, automatically selects between 0 and 1). Thanks for your output, i added "-etha 2 -ethi 5" to the config row and will check how it will perform this night. Please post results. Also how did you clock the gpus? Lastly do you use stock bios or flash a bios?
|
|
|
|
thedue
|
|
March 24, 2017, 08:12:17 AM |
|
Any recommandation on settings for eth + decr settings for RX470 / SM ? (low power!)
|
|
|
|
naeme18720
|
|
March 24, 2017, 12:08:28 PM |
|
Please give me link download win 10 64bit in flash 8gb or 16 gb
Are you know??
|
|
|
|
thedue
|
|
March 24, 2017, 12:30:50 PM |
|
Please give me link download win 10 64bit in flash 8gb or 16 gb
Are you know??
|
|
|
|
Maxumark
|
|
March 24, 2017, 12:43:51 PM |
|
Please give me link download win 10 64bit in flash 8gb or 16 gb
Are you know??
Its not available or needed in a Windows version. You don't need to know Linux to run it. Just follow the instructions to download, image a drive, change email address on drive, save, eject, install in rig, boot, and manage from your computer with the email link.
|
Mining LTC and other alts since 2014 when I thought I missed the BTC train.
|
|
|
naeme18720
|
|
March 24, 2017, 12:54:02 PM |
|
Please give me link download win 10 64bit in flash 8gb or 16 gb
Are you know??
Its not available or needed in a Windows version. You don't need to know Linux to run it. Just follow the instructions to download, image a drive, change email address on drive, save, eject, install in rig, boot, and manage from your computer with the email link. ok but OC not good for 3 the reason 1.We can not turn on the computer If the power goes off 2. in OC About 2 m/h less that gpu for example rx 470 in win 7 or 10 27.400 but in OC 26.100 3.in win 7 or 10 -110mv but in oc not can be Low power graphics just put 1 power that 1-7 I found installing win 10 64bit in flash 8gb This link https://www.tenforums.com/tutorials/2376-create-bootable-usb-flash-drive-install-windows-10-a.html
|
|
|
|
pbuva
|
|
March 24, 2017, 06:57:16 PM Last edit: March 24, 2017, 07:32:27 PM by pbuva |
|
Hi,
Sapphire Nitro+ RX 480 8GB, stock rom : ETH + PASC : 1024/2240/1 26,5 + 197 ( -dcri 15) I have a relatively cheap electricity, 0,04 USD, but no air conditioning (heat is the enemy)
have you found a better settings?
|
|
|
|
marcos5872
Member
Offline
Activity: 107
Merit: 10
|
|
March 24, 2017, 07:11:14 PM |
|
Hi,
Sapphire Nitro+ RX 480 8GB, stock rom : ETH + PASC : 1024/2240/1
have you found a better settings?
Hello, what's hashrate do you get?
|
|
|
|
pbuva
|
|
March 24, 2017, 07:28:40 PM |
|
Hi,
Sapphire Nitro+ RX 480 8GB, stock rom : ETH + PASC : 1024/2240/1
have you found a better settings?
Hello, what's hashrate do you get? 26,5 + 197 ( -dcri 15)
|
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
March 25, 2017, 12:14:50 PM |
|
UPDATE: Anyone ready for AMD new driver BETA TEST ? possible ~3% mining speed increase NOTE: !!! :As it is beta test, keep in mind that you need to be near your rig, make upgrade and pray thet it will succeed. There is always a change with bigger updates that something will go wrong and rig wont boot or wont start mining. Upgrade only one rig at a time to see if its working ! In that case you would need to reflash your drive with old stable version. Also in my case i had 4.11 beta kernel, please tell me if with other it will also work (it propably will) All my rigs upgraded without any problem Also ignore warnings "Possible missing firmware" Please write down old hash speed and wattage and after upgrade, new speeds and wattage to make a compare Post your results here.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4256
Merit: 8551
'The right to privacy matters'
|
|
March 25, 2017, 12:50:59 PM Last edit: March 25, 2017, 01:04:45 PM by philipma1957 |
|
Hi,
Sapphire Nitro+ RX 480 8GB, stock rom : ETH + PASC : 1024/2240/1 26,5 + 197 ( -dcri 15) I have a relatively cheap electricity, 0,04 USD, but no air conditioning (heat is the enemy)
have you found a better settings?
yeah stop dual mining heat will drop. as dual mining pulls more power @ ty kernel up grade driver up grade done
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
March 25, 2017, 12:59:04 PM Last edit: March 25, 2017, 01:15:13 PM by citronick |
|
Phillip or whoever have done the kernel upgrade..... pls post results. I am not in my warehouse now and I have to avoid any itchy fingers ... NOTE -- those who are using SRR, you may want to disable them temporarily so that SRR don't accidently reboot your rig after 250 seconds because of no hashing or online activity. Looks like this kernel upgrade will take more than 10 mins.
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
philipma1957
Legendary
Offline
Activity: 4256
Merit: 8551
'The right to privacy matters'
|
|
March 25, 2017, 01:07:27 PM |
|
it works and I am slower 51.7 for 2 cards vs 52.2 for two cards worse yet I now get pulse I drop to 41 then go to 51.7 my settings are below just the top rig was changed I will have to find new clocks to get rid of pulse action pulse to 41 or 42 has stopped I will keep an eye out. if you do the change you may get different results as I am oem bios and use 0 power stage setting
|
|
|
|
TheYankeesWin!
|
|
March 25, 2017, 01:22:40 PM |
|
Phil could you boost the core and fans a bit to see if the new drivers like a higher core then 999?
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4256
Merit: 8551
'The right to privacy matters'
|
|
March 25, 2017, 01:23:49 PM |
|
Phil could you boost the core and fans a bit to see if the new drivers like a higher core then 999?
Okay I will change the top one which has the up grades I will change the next two which don't have the upgrades You were right the higher core of 1020 does do better with new amd drivers It is warming up today in NJ so I have to do higher fans.
|
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
March 25, 2017, 01:29:22 PM |
|
Phil could you boost the core and fans a bit to see if the new drivers like a higher core then 999?
Okay I will change the top one which has the up grades I will change the next two which don't have the upgrades You were right the higher core of 1020 does do better with new amd drivers If you want more MH then increase core to 1150. Its limiting you right now
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4256
Merit: 8551
'The right to privacy matters'
|
|
March 25, 2017, 01:51:00 PM |
|
Phil could you boost the core and fans a bit to see if the new drivers like a higher core then 999?
Okay I will change the top one which has the up grades I will change the next two which don't have the upgrades You were right the higher core of 1020 does do better with new amd drivers If you want more MH then increase core to 1150. Its limiting you right now I like the 0 power stage setting so I boosted to 1050 and the newer driver is better I will get back with 1075 then 1100 then 1125 then 1150
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
March 25, 2017, 02:11:34 PM |
|
Phil - if you have rigs that show the "300/300" thing..... if you upgrade to this kernel - will it go away? Thanks
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
|