[B3]B3Coin Hybrid POW/POS [Scrypt] - ANTI-INSTAMINE, NO PREMINE, NO ICO, NO IPO

[Daffadile]

I still haven't been able to stake anything. How long does it take ? There was another coin that also said 0 network weight same as b3 but it staked and worked. B3 just doesn't seem to want to stake.

Do you have up to 1000 B3 coins? You will stake better if you have more coins.

Remember that B3 is till being POW mined, so POW mining is consuming a lot of blocks.

I used to have similar problem for many days, but things should resolve after a few days/

PoW shouldnt make any difference to the stake reward mate ...

the percentage for staking stays the same - just the weight changes ... so when you have more coins - you stake more often - but you still get the same percentage ...

so if you have a small amount of coins - it will stake - just much slower - no matter what the PoW hashrate is ...

#crysx

That is what I though. Noone is buying b3 the price gap is huge. The coin does it stake doesn't it ? Who know ? Noone can tell me how the staking works oe how long it takes so I'm going to presume noone actually has many b3 coins. Also the other coin I speak of is FRT and it is staking with only 250 coin. Which value is like 1250satoshi-3000satishi and had next to no weight but still it stakes. There was this and crab coin but crab is looking very dead. This looks not good either. I am sad

[GREEDYJOHN]

I still haven't been able to stake anything. How long does it take ? There was another coin that also said 0 network weight same as b3 but it staked and worked. B3 just doesn't seem to want to stake.

Do you have up to 1000 B3 coins? You will stake better if you have more coins.

Remember that B3 is till being POW mined, so POW mining is consuming a lot of blocks.

I used to have similar problem for many days, but things should resolve after a few days/

PoW shouldnt make any difference to the stake reward mate ...

the percentage for staking stays the same - just the weight changes ... so when you have more coins - you stake more often - but you still get the same percentage ...

so if you have a small amount of coins - it will stake - just much slower - no matter what the PoW hashrate is ...

#crysx

That is what I though. Noone is buying b3 the price gap is huge. The coin does it stake doesn't it ? Who know ? Noone can tell me how the staking works oe how long it takes so I'm going to presume noone actually has many b3 coins. Also the other coin I speak of is FRT and it is staking with only 250 coin. Which value is like 1250satoshi-3000satishi and had next to no weight but still it stakes. There was this and crab coin but crab is looking very dead. This looks not good either. I am sad

My wallet has been offline for a while. I will start to stake and see what happens.

[bumbacoin]

i looked at a recent stake and looked back to see how old it was..

block 15086,
transaction c5d4a7e75d4eb4def2e73a5c600dc5d0a4b1e136ddca8a195f4794280fd22c0e  https://chainz.cryptoid.info/b3/tx.dws?22963.htm
128.93397259 B3 staked @ 2016-10-28 00:34:24

in the inputs you can see the transaction where those 128.93397259 B3 were created.
transaction e57eaaa5bc2ebe7d14849ab8f6bda4ddcd33c9e20e2f8d3e44d62d0b4426bd3c  https://chainz.cryptoid.info/b3/tx.dws?20261.htm
@ 2016-10-22 03:32:16


so it took 5 days, 21 hours for 128.93397259 to stake.


.
the previous block 15085,
transaction 03ff4da289b9da4ebe757fd64c0d84dd774c7c5b153bcb9e813e8725ece53bf8  https://chainz.cryptoid.info/b3/tx.dws?22961.htm
103.30657533 B3 staked @ 2016-10-28 00:31:44

input transaction d6df3959f49a06dff5a290b690e4e89ed29beca478968db781e200858ee6af4e  https://chainz.cryptoid.info/b3/tx.dws?20589.htm
@ 2016-10-22 20:00:00

those took 5 days, 1 1/2 hours for 103.30657533 to stake.

,,

mind you, these 5.4 coins https://chainz.cryptoid.info/b3/tx.dws?21283.htm
only took 3 days 17 hours …

so maybe those top two are in a wallet that was closed for a while ..

[crysx]

b3.poolinat0r.com
I have disabled stakeing for the pool wallet. Payout problem from yesterday got resolved and i checked latest withdraws: working.
Efficiency is most likely always on 100% (i moved the stratum yesterday to a phsyical server instead of a vm).

you should NEVER stake pool wallets mate ...

it locks funds that belong to miners / customers that they cannot get access to IF they decide to remove the mined coins from the pool ...

stratum can run in a vm - but its VERY slow and does not as well as a full vps or stand alone machine ...

what os are you using for it?

#crysx

[crysx]

I still haven't been able to stake anything. How long does it take ? There was another coin that also said 0 network weight same as b3 but it staked and worked. B3 just doesn't seem to want to stake.

Do you have up to 1000 B3 coins? You will stake better if you have more coins.

Remember that B3 is till being POW mined, so POW mining is consuming a lot of blocks.

I used to have similar problem for many days, but things should resolve after a few days/

PoW shouldnt make any difference to the stake reward mate ...

the percentage for staking stays the same - just the weight changes ... so when you have more coins - you stake more often - but you still get the same percentage ...

so if you have a small amount of coins - it will stake - just much slower - no matter what the PoW hashrate is ...

#crysx

That is what I though. Noone is buying b3 the price gap is huge. The coin does it stake doesn't it ? Who know ? Noone can tell me how the staking works oe how long it takes so I'm going to presume noone actually has many b3 coins. Also the other coin I speak of is FRT and it is staking with only 250 coin. Which value is like 1250satoshi-3000satishi and had next to no weight but still it stakes. There was this and crab coin but crab is looking very dead. This looks not good either. I am sad

staking does work from what i can see ...

but you need a good weight - as well as the network - to roll staking blocks over ...

i think you are right though - there is not many that have a huge amount of coins in their wallets - to give a heavy weight to the staking ... but that will change as time moves on and as PoW mining is increased ...

josh has already said he is working on a new fix for the compilations - and im working tirelessly on the backend infrastructure for cwi - which will mean we will have a more solid back end soon for b3coin and the other coins we are supporting - including our own granite ( grn ) ...

so keep your wallet open - unlock it if you have a password ( otherwise it wont stake ) and let the fun begin ...

its a new coin - so just give it time mate ...

#crysx

[crysx]

I still haven't been able to stake anything. How long does it take ? There was another coin that also said 0 network weight same as b3 but it staked and worked. B3 just doesn't seem to want to stake.

Do you have up to 1000 B3 coins? You will stake better if you have more coins.

Remember that B3 is till being POW mined, so POW mining is consuming a lot of blocks.

I used to have similar problem for many days, but things should resolve after a few days/

PoW shouldnt make any difference to the stake reward mate ...

the percentage for staking stays the same - just the weight changes ... so when you have more coins - you stake more often - but you still get the same percentage ...

so if you have a small amount of coins - it will stake - just much slower - no matter what the PoW hashrate is ...

#crysx

That is what I though. Noone is buying b3 the price gap is huge. The coin does it stake doesn't it ? Who know ? Noone can tell me how the staking works oe how long it takes so I'm going to presume noone actually has many b3 coins. Also the other coin I speak of is FRT and it is staking with only 250 coin. Which value is like 1250satoshi-3000satishi and had next to no weight but still it stakes. There was this and crab coin but crab is looking very dead. This looks not good either. I am sad

My wallet has been offline for a while. I will start to stake and see what happens.

you are one of the bigger investors in b3coin - so your wallet is important to the over staking ...

same with anyone that has quite a few coins ... and any one that has the option to have their wallets open all the time ...

#crysx

[crysx]

i looked at a recent stake and looked back to see how old it was..

block 15086,
transaction c5d4a7e75d4eb4def2e73a5c600dc5d0a4b1e136ddca8a195f4794280fd22c0e  https://chainz.cryptoid.info/b3/tx.dws?22963.htm
128.93397259 B3 staked @ 2016-10-28 00:34:24

in the inputs you can see the transaction where those 128.93397259 B3 were created.
transaction e57eaaa5bc2ebe7d14849ab8f6bda4ddcd33c9e20e2f8d3e44d62d0b4426bd3c  https://chainz.cryptoid.info/b3/tx.dws?20261.htm
@ 2016-10-22 03:32:16


so it took 5 days, 21 hours for 128.93397259 to stake.


.
the previous block 15085,
transaction 03ff4da289b9da4ebe757fd64c0d84dd774c7c5b153bcb9e813e8725ece53bf8  https://chainz.cryptoid.info/b3/tx.dws?22961.htm
103.30657533 B3 staked @ 2016-10-28 00:31:44

input transaction d6df3959f49a06dff5a290b690e4e89ed29beca478968db781e200858ee6af4e  https://chainz.cryptoid.info/b3/tx.dws?20589.htm
@ 2016-10-22 20:00:00

those took 5 days, 1 1/2 hours for 103.30657533 to stake.

,,

mind you, these 5.4 coins https://chainz.cryptoid.info/b3/tx.dws?21283.htm
only took 3 days 17 hours …

so maybe those top two are in a wallet that was closed for a while ..

i believe that is the reason - hence my reasoning with this all ...

but you are more investigative than i ...

the staking code is like many other coins out there - but unlike many others - b3coin is stil vey young with not a huge adoption rate yet ...

#crysx

[GREEDYJOHN]

i looked at a recent stake and looked back to see how old it was..

block 15086,
transaction c5d4a7e75d4eb4def2e73a5c600dc5d0a4b1e136ddca8a195f4794280fd22c0e  https://chainz.cryptoid.info/b3/tx.dws?22963.htm
128.93397259 B3 staked @ 2016-10-28 00:34:24

in the inputs you can see the transaction where those 128.93397259 B3 were created.
transaction e57eaaa5bc2ebe7d14849ab8f6bda4ddcd33c9e20e2f8d3e44d62d0b4426bd3c  https://chainz.cryptoid.info/b3/tx.dws?20261.htm
@ 2016-10-22 03:32:16


so it took 5 days, 21 hours for 128.93397259 to stake.


.
the previous block 15085,
transaction 03ff4da289b9da4ebe757fd64c0d84dd774c7c5b153bcb9e813e8725ece53bf8  https://chainz.cryptoid.info/b3/tx.dws?22961.htm
103.30657533 B3 staked @ 2016-10-28 00:31:44

input transaction d6df3959f49a06dff5a290b690e4e89ed29beca478968db781e200858ee6af4e  https://chainz.cryptoid.info/b3/tx.dws?20589.htm
@ 2016-10-22 20:00:00

those took 5 days, 1 1/2 hours for 103.30657533 to stake.

,,

mind you, these 5.4 coins https://chainz.cryptoid.info/b3/tx.dws?21283.htm
only took 3 days 17 hours …

so maybe those top two are in a wallet that was closed for a while ..

i believe that is the reason - hence my reasoning with this all ...

but you are more investigative than i ...

the staking code is like many other coins out there - but unlike many others - b3coin is stil vey young with not a huge adoption rate yet ...

#crysx

I hope that you are enjoying the weekend?

[crysx]

i looked at a recent stake and looked back to see how old it was..

block 15086,
transaction c5d4a7e75d4eb4def2e73a5c600dc5d0a4b1e136ddca8a195f4794280fd22c0e  https://chainz.cryptoid.info/b3/tx.dws?22963.htm
128.93397259 B3 staked @ 2016-10-28 00:34:24

in the inputs you can see the transaction where those 128.93397259 B3 were created.
transaction e57eaaa5bc2ebe7d14849ab8f6bda4ddcd33c9e20e2f8d3e44d62d0b4426bd3c  https://chainz.cryptoid.info/b3/tx.dws?20261.htm
@ 2016-10-22 03:32:16


so it took 5 days, 21 hours for 128.93397259 to stake.


.
the previous block 15085,
transaction 03ff4da289b9da4ebe757fd64c0d84dd774c7c5b153bcb9e813e8725ece53bf8  https://chainz.cryptoid.info/b3/tx.dws?22961.htm
103.30657533 B3 staked @ 2016-10-28 00:31:44

input transaction d6df3959f49a06dff5a290b690e4e89ed29beca478968db781e200858ee6af4e  https://chainz.cryptoid.info/b3/tx.dws?20589.htm
@ 2016-10-22 20:00:00

those took 5 days, 1 1/2 hours for 103.30657533 to stake.

,,

mind you, these 5.4 coins https://chainz.cryptoid.info/b3/tx.dws?21283.htm
only took 3 days 17 hours …

so maybe those top two are in a wallet that was closed for a while ..

i believe that is the reason - hence my reasoning with this all ...

but you are more investigative than i ...

the staking code is like many other coins out there - but unlike many others - b3coin is stil vey young with not a huge adoption rate yet ...

#crysx

I hope that you are enjoying the weekend?

tanx mate ...

same with you ...

#crysx

[chorizanga]

hello I wanted to look at b3.Poolinat0r but not reflected in the page ...

http://image.prntscr.com/image/ca01835ca0d64932a8e9386aa1ea573f.jpeg

http://image.prntscr.com/image/5ffc3e82df4a42eabb1b3f405e61572d.jpeg

http://image.prntscr.com/image/48edd261260d4cebacc333b2d6d27c25.jpeg

I undermined by 1 hour and nothing ...

[joshafest]

did you get any share accepted?
i think it only active if your shares get accepted + you do verification if required by pool if any ..

[chorizanga]

did you get any share accepted?
i think it only active if your shares get accepted + you do verification if required by pool if any ..

No, I use the multi-x64 cpuminer and I think this does not show (yay and boo)
but this mine x11. which you use?

[bumbacoin]

did you get any share accepted?
i think it only active if your shares get accepted + you do verification if required by pool if any ..

No, I use the multi-x64 cpuminer and I think this does not show (yay and boo)
but this mine x11. which you use?

your problem maybe that the diff is too high, perhaps with cpu it might take a few weeks to get a share ..

i don't know if this process is translatable to x11,
but scrypt mining you 'd work out like this
https://litecoin.info/Difficulty#How_soon_might_I_expect_to_generate_a_block.3F

time=2^32 * diff/hash

with current diff at around 40, imagining a block every 10 minutes, using a quick switch around
gives
hash = 2^32 * diff/time
       = 2^32 * 40/600
       = 286,331,153.06666666666667

so a 286 mh/s mining rate might give you a block averaging around 10 minutes.

a cpu might give you hmm, maybe 10kh/s a random guess  ( a low end vps might give you 1.5khs from memory)
10 kh/s would give you a block average 17179869.184 seconds, or 28 weeks …


edit.
if you're really keen to mine, best bet would be to hire some hash on http://miningrigrentals.com/
but at this price, you'd be better off to put a buy order in and wait for someone to sell you some

[testbug]

hello I wanted to look at b3.Poolinat0r but not reflected in the page ...







I undermined by 1 hour and nothing ...

Hi there,

i am useing the x11 miner for my GPU and i was also renting some hashpowers on nicehash (yes, pool is nicehash compatible).
How long did you let the miner running? 1h? Should have found atleast one single share. Did you receive messages like: "stratum subscription timed out" "stratum has been reset" "timout" or anything like that?

[crysx]

hello I wanted to look at b3.Poolinat0r but not reflected in the page ...







I undermined by 1 hour and nothing ...

Hi there,

i am useing the x11 miner for my GPU and i was also renting some hashpowers on nicehash (yes, pool is nicehash compatible).
How long did you let the miner running? 1h? Should have found atleast one single share. Did you receive messages like: "stratum subscription timed out" "stratum has been reset" "timout" or anything like that?

depends on your setup - and depends on the pool setup - and depends on the difficulty of the coin ...

if you can mine with the same setting on another pool ... then its the pool issue ...
if you can mine with the same settings solo - then its a pool issue ...
if you get the same issues on both - then its your issue ... and likely to be a configuration issue somewhere ...

where are you mining? ... what is your configuration / mining software / parameters used ? ...

our pool will come along soon - when a solid compile comes through with out ANY errors ... this means that the most difficult compilation os is a success and will more than likely compile on almost any platform ...

this community has a lot of patience - and it will be well deserved ... as once the compilation is set in stone - the pool will follow shortly after as well ...

#crysx

[joshafest]

What going on ?

[Daffadile]

Yay !! After all this time my b3 is finally staking. Ok staking works nicely just stakes alot at a time instead of lots of little bits. I also don't have that much weight. Keeping my wallet open 24/7 since I got it. Just hope volume picks up. I like this coin. It is like crab but crab died. xP

[GREEDYJOHN]

Yay !! After all this time my b3 is finally staking. Ok staking works nicely just stakes alot at a time instead of lots of little bits. I also don't have that much weight. Keeping my wallet open 24/7 since I got it. Just hope volume picks up. I like this coin. It is like crab but crab died. xP

I am happy to hear the good news.

[GREEDYJOHN]

Block 17263 

[GREEDYJOHN]

Yay !! After all this time my b3 is finally staking. Ok staking works nicely just stakes alot at a time instead of lots of little bits. I also don't have that much weight. Keeping my wallet open 24/7 since I got it. Just hope volume picks up. I like this coin. It is like crab but crab died. xP

thats great.

I still have my wallet staking, currently at block 17526