[B3]B3Coin Hybrid POW/POS [Scrypt] - ANTI-INSTAMINE, NO PREMINE, NO ICO, NO IPO

[playersfun]

importing worked fine, minted #243 but all my coins are staked now and I only have 1 connection, nobody else is staking?

do i need my wallet open (24/7) for staking? Or is it ok if i only open it once a day?

[Limx Dev]

importing worked fine, minted #243 but all my coins are staked now and I only have 1 connection, nobody else is staking?

do i need my wallet open (24/7) for staking? Or is it ok if i only open it once a day?

Yes that is okay...you have to unlock for staking.

[pisko]

Good work lads

I will send PMs out later today, after you guys have confirmed your tests.

Hello,

i need some tester for the new core. Please note it is a Alpha version. Shortly updates are possible.

Here is the wallet link.

https://dl.dropboxusercontent.com/u/21000833/B3/WalletDownload/WalletDownload.zip

Export your privkey from the old chain and import your privkey.



Please support the network and stake.

Until block 10000 received you 8%pa. + static reward 1 B3 per block.

hello...
can we download source code of new wallet?
thank you

[Limx Dev]

Good work lads

I will send PMs out later today, after you guys have confirmed your tests.

Hello,

i need some tester for the new core. Please note it is a Alpha version. Shortly updates are possible.

Here is the wallet link.

https://dl.dropboxusercontent.com/u/21000833/B3/WalletDownload/WalletDownload.zip

Export your privkey from the old chain and import your privkey.



Please support the network and stake.

Until block 10000 received you 8%pa. + static reward 1 B3 per block.

hello...
can we download source code of new wallet?
thank you

I have sent a pm.

Please note..the last block is 243. We wait now that the POS diff Reduced, that needed some blocks.

[axmjoe]

i want to participate please tell me how to export & import private key

[TimC]

I have sent a pm.

Please note..the last block is 243. We wait now that the POS diff Reduced, that needed some blocks.

I have downloaded the wallet and imported private key. So I had a bunch of inputs and when it staked it grouped them all into one input. So I pushed the chain one block forward.

[playersfun]

importing worked fine, minted #243 but all my coins are staked now and I only have 1 connection, nobody else is staking?

do i need my wallet open (24/7) for staking? Or is it ok if i only open it once a day?

Yes that is okay...you have to unlock for staking.

so there is no difference from 24/7 and only one or 2 times by day to the staking amount in 24hours?

[Limx Dev]

importing worked fine, minted #243 but all my coins are staked now and I only have 1 connection, nobody else is staking?

do i need my wallet open (24/7) for staking? Or is it ok if i only open it once a day?

Yes that is okay...you have to unlock for staking.

so there is no difference from 24/7 and only one or 2 times by day to the staking amount in 24hours?

That is also possible. I want to create some POS blocks.

[benjy33]

Some tutorial steps to follow thank you

[crysx]

importing worked fine, minted #243 but all my coins are staked now and I only have 1 connection, nobody else is staking?

do i need my wallet open (24/7) for staking? Or is it ok if i only open it once a day?

Yes that is okay...you have to unlock for staking.

so there is no difference from 24/7 and only one or 2 times by day to the staking amount in 24hours?

That is also possible. I want to create some POS blocks.

had i been included in any of this - you would have had all the seednodes involved AND the coins weight to stake in those seeds ...

this is just friggin soopy and droidz all over again ...

#crysx

[Limx Dev]

The Source is now online.

https://github.com/LIMXTEC/B3-CoinV2/

Download are possible under

https://github.com/LIMXTEC/B3-CoinV2/releases/

The new staking works correct. But it need time until the chain run smooth.

Official Swap list. Top 100 12-18-2016.

https://dl.dropboxusercontent.com/u/21000833/B3/Snaphot.txt

Possystem = POS + static amount 1 B3 per block.
0 - 10k                  8% p.a.
10K - 20k             15%p.a
20K - 30k             25%p.a
30K - 40k             50%p.a
40K - 50k           100%p.a
50K - 60k         1000%p.a
60K - 80k       10000%p.a
80K - 100k         100%p.a
100K - 1000k       20%p.a
1000K - end          5%p.a


Standard fee is 0.1 B3 (Spam Protection) and B3 has in one year a big total amount.  .

B3-Coin supports 5 MB blocks and big single tx sizes. The target blocktime is 6 min. Hash is scypt.

Example banner for the ANN.



Guide:
1.
Open the old wallet and search your old pubkey. -> Copy the pubkey -> Go to the Debug window -> Enter ->dumpprivkey [your_copy_pubkey_without"]"] -> Save the privkey. (The first letter is "P")
2.
Open the new wallet  -> Go to the Debug window -> -> Enter ->importprivkey [your_copy_privkey_without"]"]

[GREEDYJOHN]

I have downloaded the recent update, and I have send PMs out to numerous members.

[benjy33]

The Source is now online.

https://github.com/LIMXTEC/B3-CoinV2/

Download are possible under

https://github.com/LIMXTEC/B3-CoinV2/releases/

The new staking works correct. But it need time until the chain run smooth.

Official Swap list. Top 100 12-18-2016.

https://dl.dropboxusercontent.com/u/21000833/B3/Snaphot.txt

Possystem = POS + static amount 1 B3 per block.
0 - 10k                  8% p.a.
10K - 20k             15%p.a
20K - 30k             25%p.a
30K - 40k             50%p.a
40K - 50k           100%p.a
50K - 60k         1000%p.a
60K - 80k       10000%p.a
80K - 100k         100%p.a
100K - 1000k       20%p.a
1000K - end          5%p.a


Standard fee is 0.1 B3 (Spam Protection) and B3 has in one year a big total amount.  .

B3-Coin supports 5 MB blocks and big single tx sizes. The target blocktime is 6 min. Hash is scypt.

Example banner for the ANN.



Guide:
1.
Open the old wallet and search your old pubkey. -> Copy the pubkey -> Go to the Debug window -> Enter ->dumpprivkey [your_copy_pubkey_without"]"] -> Save the privkey. (The first letter is "P")
2.
Open the new wallet  -> Go to the Debug window -> -> Enter ->importprivkey [your_copy_privkey_without"]"]

Transfer completed good!!!  

[axmjoe]

Thanks for the instructions, I have successfully export/import private key and now my wallet is  staking

[bumbacoin]

Okay, i have the snapshot maked. I make now some tests with the new Wallet.

https://dl.dropboxusercontent.com/u/21000833/B3/Snaphot.txt

Amounts under 11.4 B3 are not saved. I make a B3 Giveaway from the remains.

Best Regards Christian

that cutoff seems a bit harsh
this address with  1899 coins has many tx under 5
https://chainz.cryptoid.info/b3/address.dws?STS5ESYVATz2sDqAxpy34HCRKygBWo9oNC.htm

i'm seeing some curious transactions in that above,
i'm curious what these transactions actually are ??
https://chainz.cryptoid.info/b3/block.dws?35705.htm


--
in the last 100 blocks, it looks like there has been 43 transactions under 11 coins.

No, i mean single addresses with total balance under 14.1 .

You can see your address 24   STS5ESYVATz2sDqAxpy34HCRKygBWo9oNC   1815,4
(Snaphot 10h ago)
https://dl.dropboxusercontent.com/u/21000833/B3/Snaphot.txt

my mistake,
am compiling wallet now,
i will post a mac qt a bit later


current git needs that old chestnut to work
$ chmod +x leveldb/build_detect_platform

[bumbacoin]

cool.
i just moved my wallet.dat into the new coin directory and all is good.

on an amusing note,
staking info seems still incorrect

getstakinginfo
{
    "enabled" : true,
    "staking" : true,
    "errors" : "",
    "currentblocksize" : 1000,
    "currentblocktx" : 0,
    "pooledtx" : 0,
    "difficulty" : 0.00024414,
    "search-interval" : 1,
    "weight" : 3132585000,
    "netstakeweight" : 95,
    "expectedtime" : 0
}





,,,, and got my first stake

a large quantity of those 0.005 inputs combined into one

https://github.com/LIMXTEC/B3-CoinV2/blob/master/src/wallet.cpp#L26

static int64_t GetStakeCombineThreshold() { return 5000 * COIN; }
static int64_t GetStakeSplitThreshold() { return 1 * GetStakeCombineThreshold(); }


.. with a coinsupply of 260k, 5k split/combines will lead to 52 inputs .. lol
(except people won't have neat amounts of 5k so it will realistically be more if all coins were staking)

i'm modifying my daemon to 100 (split/combine), but my coins have already staked

[Daffadile]

Has the coin been taking over by a new Dev or something ? Clearly he knows what he is doing I am glad. I think I will buy some more b3 and start staking right away as it should have worked to begin with. So much staking time lost

[Limx Dev]

cool.
i just moved my wallet.dat into the new coin directory and all is good.

on an amusing note,
staking info seems still incorrect

getstakinginfo
{
    "enabled" : true,
    "staking" : true,
    "errors" : "",
    "currentblocksize" : 1000,
    "currentblocktx" : 0,
    "pooledtx" : 0,
    "difficulty" : 0.00024414,
    "search-interval" : 1,
    "weight" : 3132585000,
    "netstakeweight" : 95,
    "expectedtime" : 0
}





,,,, and got my first stake

a large quantity of those 0.005 inputs combined into one

https://github.com/LIMXTEC/B3-CoinV2/blob/master/src/wallet.cpp#L26

static int64_t GetStakeCombineThreshold() { return 5000 * COIN; }
static int64_t GetStakeSplitThreshold() { return 1 * GetStakeCombineThreshold(); }


.. with a coinsupply of 260k, 5k split/combines will lead to 52 inputs .. lol
(except people won't have neat amounts of 5k so it will realistically be more if all coins were staking)

i'm modifying my daemon to 100 (split/combine), but my coins have already staked

Okay, that is a nice Info...i reduce that at github. I can create some POW Blocks to move the chain.

EDIT: Server updated and Windows-QT.

[Limx Dev]

Has the coin been taking over by a new Dev or something ? Clearly he knows what he is doing I am glad. I think I will buy some more b3 and start staking right away as it should have worked to begin with. So much staking time lost

The Version 1 from B3 has a big staking mistake and Masternode were not necessary. 

[bumbacoin]

Has the coin been taking over by a new Dev or something ? Clearly he knows what he is doing I am glad. I think I will buy some more b3 and start staking right away as it should have worked to begin with. So much staking time lost

now they're on a dead chain.
what will happen with yobit ?

TIP O'THE DAY.
Do not buy on YoBit currently !!