nerdralph
|
|
November 12, 2016, 09:30:34 PM |
|
@Marc @Genoil and other SA devs,
In v5, running two instances does not give more S/s (at least in my experience). This could be a way for improvement. in v3 running second instance was bringing +25-30%.
If I look at the new competitor Optiminer, he's results with two instances show what you could obtain with SAv5 + 25% with second instance.
Good luck and much thanks for good work.
This is actually an indication that GPU is now fully utilized. Additional optimizations are going to take a bit more work now.
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
November 12, 2016, 09:34:49 PM |
|
How can i get Silentarmy running on windows?
https://mega.nz/#F!iwYQhI6S!2vl0D3jz3fH3-bZxHUurBg Download cigwin 64bit when asked for packets search python3 interpreter install and run from start.bat included in zip file(don't forget to edit...or not Is python3 interpreter sufficient or should I install recommended dependencies? I installed everything it recommended after selecting the 6mb python package, it works fine. Install everything that is recommend or you might not like the results if you don't . it's a fast a install or was for me .
|
|
|
|
Heymdale
|
|
November 12, 2016, 09:37:20 PM |
|
I don't know why but my hashrate are decreasing from 90 to 0 after few minutes !
Try increase "Power limit" to max.
|
|
|
|
hawkfish007
|
|
November 12, 2016, 09:43:16 PM |
|
I am running v5 on win 10 with 7 470s and 7 480s, both cases gpu0 and 6 (7) hashes at .9 and half speed. Did anyone able to run all 7 gpus at full speed in windows? Do I need to set mclock with wattman?
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
November 12, 2016, 09:48:28 PM |
|
I may have a power problem two cards stay in the low 80 avg and one dropped to 54 or lower and is avging around 50 . playing with power limit looked like it made it worse.
|
|
|
|
dexxa05
Member
Offline
Activity: 87
Merit: 10
|
|
November 12, 2016, 09:53:51 PM |
|
I don't know why but my hashrate are decreasing from 90 to 0 after few minutes !
Try increase "Power limit" to max. How to do that ?
|
|
|
|
EuroCanuck
Newbie
Offline
Activity: 52
Merit: 0
|
|
November 12, 2016, 10:11:35 PM |
|
i asked before,no one answered... could someone explain why the windows port would work perfectly on one rig and run very slow on an identical rig? happening with 2 of my rigs... 1 of all RX 470's and one of 290's/290x mix rig. works great on one but slow on another identical rig , so out of 5 rigs im running SA on 3 and claymore's on 2..OS/drivers and hardware are all the same...weird eh..
this happens when silentarmy detects your cpu as dev0 or dev1 try different combinations of --use --use 0,1,2,3,4,5 --use 1,2,3,4,5,6 --use 2,3,4,5,6,7
thanks
|
|
|
|
Heymdale
|
|
November 12, 2016, 10:18:21 PM |
|
I don't know why but my hashrate are decreasing from 90 to 0 after few minutes !
Try increase "Power limit" to max. How to do that ? With afterburner or another app for overclock.
|
|
|
|
joaocha
|
|
November 12, 2016, 10:26:51 PM |
|
Im gettings invalid username/pwd on miningrigrentals.com Any one can help?
|
|
|
|
dexxa05
Member
Offline
Activity: 87
Merit: 10
|
|
November 12, 2016, 10:27:13 PM |
|
I don't know why but my hashrate are decreasing from 90 to 0 after few minutes !
Try increase "Power limit" to max. How to do that ? With afterburner or another app for overclock. Ok thx and if i'm on Linux does it possible ?
|
|
|
|
djslick
Legendary
Offline
Activity: 980
Merit: 1000
|
|
November 12, 2016, 10:34:48 PM |
|
GTX1070 FE core 0 mem +500, 70% tdp 90sol/s how!? I have a GTX 1080 and I can't break the (barely) 70 sol ceiling. Tried up to 9 instances (have the Vram for it, 0.8GB/instance), but 2x instances seems to be the sweet spot. Also running at stock clocks with just a +500 VRAM boost. Can anyone else confirm GTX 1080 speeds? How many instances are you using? (can't find any other arguments to alter)
|
|
|
|
willrain
|
|
November 12, 2016, 10:39:24 PM |
|
Ok thx and if i'm on Linux does it possible ? atitweak -p 20
|
|
|
|
calculatorduck
Member
Offline
Activity: 93
Merit: 10
|
|
November 12, 2016, 10:42:26 PM |
|
What kind of hashrate would I see on a Radeon 370 with this?
|
|
|
|
oslak
|
|
November 12, 2016, 10:50:07 PM Last edit: November 12, 2016, 11:04:50 PM by oslak |
|
SAv5 works on windows7 and on r9280x. 75-80sol/s. same hashrate with claymore but without fees.
Update:
Needs further testing. My initial conclusion is that Claymore finds more solution/shares than SAv5 running at the same speed. Can anyone confirm this?
|
|
|
|
dexxa05
Member
Offline
Activity: 87
Merit: 10
|
|
November 12, 2016, 10:52:19 PM |
|
Ok thx and if i'm on Linux does it possible ? atitweak -p 20 I get atitweak from here https://github.com/mjmvisser/adl3But dont work
|
|
|
|
djslick
Legendary
Offline
Activity: 980
Merit: 1000
|
|
November 12, 2016, 10:55:17 PM |
|
I just uploaded a new version (r5) of my Windows build of SILENTARMY v5: https://mega.nz/#F!iwYQhI6S!2vl0D3jz3fH3-bZxHUurBg This should *finally* take care oft he high CPU usage with NVIDIA cards... Very nice ! R5 works fine with me, thanks, 1080 + 1070*4 Total 389.3 sol/s [dev0 63.9, dev1 81.0, dev2 82.4, dev3 84.0, dev4 75.5] 54 shares Total 390.4 sol/s [dev0 63.6, dev1 82.7, dev2 85.4, dev3 82.8, dev4 76.9] 54 shares Total 391.6 sol/s [dev0 63.8, dev1 83.4, dev2 86.4, dev3 84.7, dev4 77.8] 54 shares Total 391.1 sol/s [dev0 63.5, dev1 81.3, dev2 85.2, dev3 84.8, dev4 77.8] 54 shares Total 391.7 sol/s [dev0 63.2, dev1 79.2, dev2 86.2, dev3 86.5, dev4 78.5] 54 shares Total 390.5 sol/s [dev0 59.8, dev1 84.4, dev2 87.5, dev3 82.8, dev4 79.8] 54 shares Total 391.4 sol/s [dev0 59.9, dev1 84.3, dev2 87.2, dev3 83.4, dev4 81.6] 55 shares Total 391.6 sol/s [dev0 60.0, dev1 83.9, dev2 86.5, dev3 81.8, dev4 86.0] 55 shares Total 392.2 sol/s [dev0 60.5, dev1 83.3, dev2 86.6, dev3 82.8, dev4 85.2] 55 shares Total 397.3 sol/s [dev0 64.6, dev1 86.0, dev2 88.0, dev3 86.2, dev4 80.0] 57 shareshere's someone else getting 60's with the 1080, and 80's with the 1070. any clue as to why this is happening?
|
|
|
|
willrain
|
|
November 12, 2016, 10:55:39 PM |
|
But dont work
atitweak? Or you still see same problem in miner?
|
|
|
|
dexxa05
Member
Offline
Activity: 87
Merit: 10
|
|
November 12, 2016, 10:56:41 PM |
|
But dont work
atitweak? Or you still see same problem in miner? Atitweak dexx01@dexx02:~$ atitweak -p 20 Traceback (most recent call last): File "/usr/local/bin/atitweak", line 24, in <module> from adl3 import * File "/usr/local/lib/python2.7/dist-packages/adl3/__init__.py", line 1, in <module> from .adl_api import * File "/usr/local/lib/python2.7/dist-packages/adl3/adl_api.py", line 42, in <module> _libadl = CDLL("libatiadlxx.so", mode=RTLD_GLOBAL) File "/usr/lib/python2.7/ctypes/__init__.py", line 362, in __init__ self._handle = _dlopen(self._name, mode) OSError: libatiadlxx.so: cannot open shared object file: No such file or directory
|
|
|
|
willrain
|
|
November 12, 2016, 11:01:46 PM |
|
Atitweak dexx01@dexx02:~$ atitweak -p 20 Traceback (most recent call last): File "/usr/local/bin/atitweak", line 24, in <module> from adl3 import * File "/usr/local/lib/python2.7/dist-packages/adl3/__init__.py", line 1, in <module> from .adl_api import * File "/usr/local/lib/python2.7/dist-packages/adl3/adl_api.py", line 42, in <module> _libadl = CDLL("libatiadlxx.so", mode=RTLD_GLOBAL) File "/usr/lib/python2.7/ctypes/__init__.py", line 362, in __init__ self._handle = _dlopen(self._name, mode) OSError: libatiadlxx.so: cannot open shared object file: No such file or directory
what distro and driver you use?
|
|
|
|
dexxa05
Member
Offline
Activity: 87
Merit: 10
|
|
November 12, 2016, 11:04:25 PM |
|
Atitweak dexx01@dexx02:~$ atitweak -p 20 Traceback (most recent call last): File "/usr/local/bin/atitweak", line 24, in <module> from adl3 import * File "/usr/local/lib/python2.7/dist-packages/adl3/__init__.py", line 1, in <module> from .adl_api import * File "/usr/local/lib/python2.7/dist-packages/adl3/adl_api.py", line 42, in <module> _libadl = CDLL("libatiadlxx.so", mode=RTLD_GLOBAL) File "/usr/lib/python2.7/ctypes/__init__.py", line 362, in __init__ self._handle = _dlopen(self._name, mode) OSError: libatiadlxx.so: cannot open shared object file: No such file or directory
what distro and driver you use? AMDGPU-PRO Driver with Ubuntu
|
|
|
|
|