PleaseModMyBios
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 12, 2016, 08:34:49 PM |
|
Hello there, is there anybody who will mode my Bios HD7970 Sapphire Vapor X GHZ edition for ZEC mining please??It's Hynix AFR. Original Bios is here: https://ulozto.cz/!irAvZqBdNeFZ/sapphire-hd7970-3072-130711-rom or here (it's the same) https://www.techpowerup.com/vgabios/151332/sapphire-hd7970-3072-130711I'll be very gratefull if somebody do it for me I can flash Bios but I am too noob to change the timing in Hex Editor Thank you very much
|
|
|
|
|
|
|
|
You get merit points when someone likes your post enough to give you some. And for every 2 merit points you receive, you can send 1 merit point to someone else!
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
|
November 12, 2016, 08:44:00 PM |
|
how do these results sound?
3x 270x (modded bios for low-voltage ethereum), ~1150/1450 clocks = ~42-46 Sol/s each and 2x MSI rx470 4G Gaming (modded strap bios), stock/1750 clocks, reduced voltage 980/1050 for core, mem voltage untouched = ~65 Sol/s each
|
|
|
|
delle54
|
|
November 12, 2016, 08:46:20 PM |
|
is there anybody who will mode my Bios HD7970 Sapphire Vapor X GHZ edition for ZEC mining please??It's Hynix AFR. Try to use the search-function. Everything has been explained here many times before.
|
|
|
|
Lafu
Legendary
Online
Activity: 2968
Merit: 3045
|
|
November 12, 2016, 08:50:37 PM |
|
The 270x vapor x Gpu s are OC and moded use the orginal bios and set 1150/1450 getting 44 sols
|
|
|
|
nanona
|
|
November 12, 2016, 08:52:42 PM |
|
nice miner, high fees, speed lower than other miner, off i go & many others too soon i guess ... let's see the next update.
470 4gb nitros getting 80+ to 90 sols = happy miner without the fees or restriction but with less features but definitely can live with it !
oh the 480 8gb is hovering around 100 sols.
So you came back to let everyone know that you left? I tell you what, it is folks like you who are back the moment Claymore is again faster, just to suck his dick very hard again.Let's see your post history. I'm not working on zcash miner currently, so please don't expect that I'll release it soon. Though its PoW looks interesting for me and as soon as I have time I'll check if I can create faster miner. I get a lot of requests for private miner, so I have to repeat it again: I don't have any private miners, if I create a miner I make it public.
yeps, no private miner, kudos to that but with the fees ... you're already VERY rich (at least 5M USD in eth alone) claymore, prolly lower the built in devfees ? just my 2 sats. no disrespect claymore, NOT a single doubt that you're a great programmer that made an awesome miner software that works wonderfully & you definitely deserve the fees, TOTALLY agree with your statement, if don't like it, then don't use it.
i might be wrong with the figures hence this public apology to you.
i even voted to pay the fee if you made a zcash miner. but i'm asking prolly you might want to consider lowering the fees a tad, ain't saying NO fees ! just a request to you to consider.
everything has fees, totally agreed.
SUPER GREEDY selfish dev that stole & got caught with pants down but at least he admits it so i take my hat off to you, but you were using mrb's code & you used it for commercial gains & you made a MINIMUM of 30-50 BTC from the 2.5% FEES !
You just sent 5 ZEC to mrb ?
SUPER SHAMEFUL !
cm made over hundred's of btc or more & counting just from the zec fees alone ...
how shameful of CM paying mrb ONLY 5 ZEC !
Obviously you are very interested in Other People's Money. Not contributing anything, just leeching off others work and yet asking for free lunch everywhere. Get the fuck out!
|
|
|
|
mettalmag
Legendary
Offline
Activity: 1084
Merit: 1003
≡v≡
|
|
November 12, 2016, 08:56:14 PM |
|
I have several issues and any help would be much appreciated ^^ First is that some of my rigs for no reason stop showing up in pool (coinmine.pl) restart usually solves the problem. Second is one of 6x RX480 rigs one card has artifacts is it possible to mine with it, I know it sounds stupid, but I need to be sure. Third one is this
|
|
|
|
buckrogers
Legendary
Offline
Activity: 2728
Merit: 1181
|
|
November 12, 2016, 08:58:27 PM |
|
I see Zec is now down to $151 a coin.
Still not a bad price per coin I suppose.
I wonder if anyone sold when the price was high and has bought more now the price has dropped hoping it will go back up again
Well that is an ideal situation in almost any scenario: buy low, sell high. and yes, if people had the coin at anything over a few BTC and they sold, they did well thanks!
|
Well I'm dr. spock I'm here to rock y'all
|
|
|
imunisasi
Member
Offline
Activity: 86
Merit: 10
|
|
November 12, 2016, 09:08:36 PM |
|
ssid mismatched when i try for shappire nitro+ rx 480 4gb, thanks That's the card i use, just add -f command to force the flash is this safe to try ?
|
|
|
|
yslyung
Legendary
Offline
Activity: 1500
Merit: 1002
Mine Mine Mine
|
|
November 12, 2016, 09:13:31 PM |
|
nice miner, high fees, speed lower than other miner, off i go & many others too soon i guess ... let's see the next update.
470 4gb nitros getting 80+ to 90 sols = happy miner without the fees or restriction but with less features but definitely can live with it !
oh the 480 8gb is hovering around 100 sols.
So you came back to let everyone know that you left? I tell you what, it is folks like you who are back the moment Claymore is again faster, just to suck his dick very hard again.Let's see your post history. I'm not working on zcash miner currently, so please don't expect that I'll release it soon. Though its PoW looks interesting for me and as soon as I have time I'll check if I can create faster miner. I get a lot of requests for private miner, so I have to repeat it again: I don't have any private miners, if I create a miner I make it public.
yeps, no private miner, kudos to that but with the fees ... you're already VERY rich (at least 5M USD in eth alone) claymore, prolly lower the built in devfees ? just my 2 sats. no disrespect claymore, NOT a single doubt that you're a great programmer that made an awesome miner software that works wonderfully & you definitely deserve the fees, TOTALLY agree with your statement, if don't like it, then don't use it.
i might be wrong with the figures hence this public apology to you.
i even voted to pay the fee if you made a zcash miner. but i'm asking prolly you might want to consider lowering the fees a tad, ain't saying NO fees ! just a request to you to consider.
everything has fees, totally agreed.
SUPER GREEDY selfish dev that stole & got caught with pants down but at least he admits it so i take my hat off to you, but you were using mrb's code & you used it for commercial gains & you made a MINIMUM of 30-50 BTC from the 2.5% FEES !
You just sent 5 ZEC to mrb ?
SUPER SHAMEFUL !
cm made over hundred's of btc or more & counting just from the zec fees alone ...
how shameful of CM paying mrb ONLY 5 ZEC !
Obviously you are very interested in Other People's Money. Not contributing anything, just leeching off others work and yet asking for free lunch everywhere. Get the fuck out! newbie oh newbie .... ain't here to suck anybody's dick but seems like you're the one doing the sucking, pretty free to dig up post history, good job ! never paid any fee using cm's miner. go figure heh & never shared with anyone on how to bypass it. i'm sure many knows how to do it. since the issue between cm n mrb has been solved, ain't gonna speak much abt it. why would i be interested in other's $ ? i'm NOT the one charging fees. leeching ? seems like the only leech here is you, go dig your own history & you only leech & post on this thread. the miner is available for anyone to use & obviously miners would wanna to use the miner that makes the most profit or whichever that suits them best. so you can either go suck your own dick or cm's dick but i highly doubt that he would want that from you. ain't gonna waste much time with ya brainless newbie SUPER DUPER cm fanboy & linux hater. go use your brain before you speak your mind or even make a post.
|
|
|
|
delle54
|
|
November 12, 2016, 09:17:46 PM |
|
... ain't gonna waste much time with ya brainless newbie SUPER DUPER cm fanboy & linux hater. So why are you doing it? Piss off troll.
|
|
|
|
adamvp
|
|
November 12, 2016, 09:28:55 PM |
|
i think Claymore new release will defeat other miners But for now for old cards other miners are better ..
|
I am looking for signature campaign pm me
|
|
|
delle54
|
|
November 12, 2016, 09:32:19 PM |
|
But for now for old cards other miners are better .. Maybe, but double the power/costs = less profit.
|
|
|
|
iMish
Newbie
Offline
Activity: 91
Merit: 0
|
|
November 12, 2016, 09:37:51 PM |
|
ssid mismatched when i try for shappire nitro+ rx 480 4gb, thanks That's the card i use, just add -f command to force the flash is this safe to try ? if you have shappire nitro+ rx 480 4gb hynix memory yes! anyway you have dual bios
|
|
|
|
Linit
Newbie
Offline
Activity: 13
Merit: 0
|
|
November 12, 2016, 09:47:46 PM |
|
Claymore´s 4.0 con 1 r9 390 g1 a 55 Sol/s, It is normal?. driver 16.7.2.
|
|
|
|
Tmdz
|
|
November 12, 2016, 10:26:35 PM |
|
ssid mismatched when i try for shappire nitro+ rx 480 4gb, thanks That's the card i use, just add -f command to force the flash is this safe to try ? if you have shappire nitro+ rx 480 4gb hynix memory yes! anyway you have dual bios The hynix seems to be rocking on Zcash. Too bad they switched to Elpida on the 4gb models, the 8gb is samsung though so that should rock pretty hard.
|
|
|
|
dygus
Legendary
Offline
Activity: 1193
Merit: 1000
Peaky Blinder
|
|
November 12, 2016, 10:53:27 PM |
|
I use the R9 Nano to mine with Claymore V4. For 6 cards, I can get about 600 Sol/s. But the power consumption is about 1200W, is that normal?
Yes, unless you undervolt them. They run stable at -72mV on core with v4.0 at 100 H/s. Probably you could go even lower. If you operate them in a very cold environment 24/7 at 200W shouldn't be a problem, with the fans spinning at 20%. If you operate them at room temperature without additional forced air cooling, 24/7 at 200W will not be good for the fans since they will spin at 50% or higher and likely not live very long. What's the best core voltage for 290x and 280x
|
|
|
|
Walrusbonzo
|
|
November 12, 2016, 10:55:16 PM |
|
I use the R9 Nano to mine with Claymore V4. For 6 cards, I can get about 600 Sol/s. But the power consumption is about 1200W, is that normal?
Yes, unless you undervolt them. They run stable at -72mV on core with v4.0 at 100 H/s. Probably you could go even lower. If you operate them in a very cold environment 24/7 at 200W shouldn't be a problem, with the fans spinning at 20%. If you operate them at room temperature without additional forced air cooling, 24/7 at 200W will not be good for the fans since they will spin at 50% or higher and likely not live very long. What's the best core voltage for 290x and 280x I find 1.05~1.07v is enough for 290x to maintain stability at 1000/1250.
|
|
|
|
dygus
Legendary
Offline
Activity: 1193
Merit: 1000
Peaky Blinder
|
|
November 12, 2016, 10:59:17 PM |
|
I use the R9 Nano to mine with Claymore V4. For 6 cards, I can get about 600 Sol/s. But the power consumption is about 1200W, is that normal?
Yes, unless you undervolt them. They run stable at -72mV on core with v4.0 at 100 H/s. Probably you could go even lower. If you operate them in a very cold environment 24/7 at 200W shouldn't be a problem, with the fans spinning at 20%. If you operate them at room temperature without additional forced air cooling, 24/7 at 200W will not be good for the fans since they will spin at 50% or higher and likely not live very long. What's the best core voltage for 290x and 280x I find 1.05~1.07v is enough for 290x to maintain stability at 1000/1250. I have 3x290x and 1x280x, core voltage at -69 core clock at 1000 mem -1350 and they consume 920 watt. Is it correct or I can get lower power
|
|
|
|
Walrusbonzo
|
|
November 12, 2016, 11:05:17 PM |
|
I use the R9 Nano to mine with Claymore V4. For 6 cards, I can get about 600 Sol/s. But the power consumption is about 1200W, is that normal?
Yes, unless you undervolt them. They run stable at -72mV on core with v4.0 at 100 H/s. Probably you could go even lower. If you operate them in a very cold environment 24/7 at 200W shouldn't be a problem, with the fans spinning at 20%. If you operate them at room temperature without additional forced air cooling, 24/7 at 200W will not be good for the fans since they will spin at 50% or higher and likely not live very long. What's the best core voltage for 290x and 280x I find 1.05~1.07v is enough for 290x to maintain stability at 1000/1250. I have 3x290x and 1x280x, core voltage at -69 core clock at 1000 mem -1350 and they consume 920 watt. Is it correct or I can get lower power Are you using stock BIOS for the 290x? If so, you should be able to go right down to -100mv and stay stable at 1GHz. worst that will happen is your miner will crash, just reboot and try again.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
November 12, 2016, 11:24:37 PM |
|
It seems I must be here all the time, as soon as I decide to take a break, something interesting happens Ok, I did not check this new Linux miner, but it seems it's faster than current version of my miner, at least in Linux. So in a day I will release faster version.
|
|
|
|
|