Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[z0n0]

~140 Sols with 290 (rock stable)

[1715479166]

1715479166

[1715479166]

1715479166

[1715479166]

1715479166

[1715479166]

1715479166

[1715479166]

1715479166

[ivomm]

my zecminer crashes only in a 380 rig, someone with the same problem?

My 6 R9 390 rig crashes severely on all cards.  The same type of cards on mixed rigs work flawlessly! The 390 rig works perfectly with other miners (Claymore ETH, XMR, Silentarmy5) and with significantly fewer crashes on ZEC  versions 3-4. I am considering replacing driver 15.12 with the lastest 16.10 or 16.11.

[ol92]

What do you rejoice? It is advantageous when your speed is higher than the other. And when the rate rises in all, you are in relation to other, standing pat are.

It just kills the coin.

Exactly - the only one actually making money is Claymore xD

If you check history, my miner is not x3 faster than others, I just see how fast others miners and release a bit faster version. This time I have to release faster version due to new miner. If people stop this speed racing I'll stop it too, but you know it won't work
Also do note my miner is not for NVidia, not for CPU and not for Linux, so if I release miner with x2 speed, network difficult is not going to raise x2 too.

Faster public miners don't kill coins! Private miners which could concentrate hash power in a few big farms may be nocive for the coins if they are a lot faster than public ones.
Faster public miners on the contrary, help with a more diversified distribution, lowering the impact of private miners.

The price is declining because zcash was overpriced due to the low initial mining rewards which leads to a very low initial supply.
The total emission will be 21 millions of coins like bitcoin or like monero in 2040: Expecting the price could be maintened around 1 btc is unreasonnable for short/medium term. I would expect price going in the 0.005-0.05 range.

[denis1995]

I have 2 rigs x6 msi rx480 8gb cards(ellesmere 1303/2000 stock) on win 10, z97 gaming mb and 8gb ram, 1200watt psu.  

Rig 1 has a small overclock of 1350/2100 using afterburner, tried the same on rig 2 and one of the GPU's crashed.  

I am getting roughly 720-750 on each rig, 120 - 130/s per card.  Is there anything else I can do to increase speed?  I'm not sure what mod I would need for the cards bios or how to do memory overclock.  Any help is much appreciated.(I am happy with these speeds but would like to learn how to push the cards harder)

Also, what does undervolting the cards do?  Is that just to lower power consumption or does it help increase speed?

Only 1200? I also have 2 rigs 1 is with 2x xfx 280, gigabyte 280x and r9 390. The other is 4x xfx 280. How much power im using? I have 2x1300w plat. But not sure if i use the powrr at all i cant out watmetter becausr i am already out. Did you know any other method to check the powe that tge rigs are consuming? Thanks you in advanced.

[MasterSE]

crimson 16.10.3, win10x64AU - Nano, 280X, 270X, RX480 - all good.

[DrX]

I have 2 rigs x6 msi rx480 8gb cards(ellesmere 1303/2000 stock) on win 10, z97 gaming mb and 8gb ram, 1200watt psu.  

Rig 1 has a small overclock of 1350/2100 using afterburner, tried the same on rig 2 and one of the GPU's crashed.  

I am getting roughly 720-750 on each rig, 120 - 130/s per card.  Is there anything else I can do to increase speed?  I'm not sure what mod I would need for the cards bios or how to do memory overclock.  Any help is much appreciated.(I am happy with these speeds but would like to learn how to push the cards harder)

Also, what does undervolting the cards do?  Is that just to lower power consumption or does it help increase speed?

Only 1200? I also have 2 rigs 1 is with 2x xfx 280, gigabyte 280x and r9 390. The other is 4x xfx 280. How much power im using? I have 2x1300w plat. But not sure if i use the powrr at all i cant out watmetter becausr i am already out. Did you know any other method to check the powe that tge rigs are consuming? Thanks you in advanced.

My 2 rigs (7950+7950+280 & 290x+290) are using about 850w, so i think one 7950/280 will take about 150w and 290(x) maybe 200w... so I think your 4x280 rig would take about 600w only...

[Ale-x]

Should bounce from here. Very low risk/High Reward trade.

http://i64.tinypic.com/8xig5v.png

Thank you, bro. I've lost 20% today

[jasini1690]

GPU #0: Ellesmere, 4096 MB available, 36 compute units RX480  Nitro+ 4gb 2 fans
GPU #1: Ellesmere, 8192 MB available, 36 compute units RX480  Nitro+ 8gb 1 fan
GPU #2: Ellesmere, 8192 MB available, 36 compute units RX480  Strix+ 8gb 3 fans
GPU #3: Ellesmere, 8192 MB available, 36 compute units RX480  Strix+ 8gb 3 fans

ZEC - Total Speed: 509.641 H/s, Total Shares: 19369, Rejected: 22, Time: 12:46
ZEC: GPU0 123.882 H/s, GPU1 121.315 H/s, GPU2 131.806 H/s, GPU3 132.766 H/s




i love this miner   great work

i used Ethos before.   GPU0    - 30 sols
                              GPU1    - 40 sols
                              GPU2,3 - 43 sols

[HardwarePal]

Still getting hangs 0% GPU usage and no submitted shares after Devfee: on one rig and on the other it hangs 0% GPU usage and no submitted shares on restart with watchdog.

[jary20]

Hello, I need help version 5 the claymore's. restart the pc giving a error kernel power. In the log of Claymore's  this


03:05:51:604   5d0   Cannot get Overdrive capabilities for adapter 0
03:05:54:606   5d0   Cannot get Overdrive capabilities for adapter 0
03:05:57:609   5d0   Cannot get Overdrive capabilities for adapter 0
03:05:57:611   5d0   Cannot get Overdrive capabilities for adapter 0
03:05:57:611   5d0   em hbt: 0, fm hbt: 31,
03:05:57:611   5d0   watchdog - thread 0, hb time 31
03:05:57:612   5d0   watchdog - thread 1, hb time 15
03:05:57:612   5d0   watchdog - thread 2, hb time 0
03:05:57:612   5d0   watchdog - thread 3, hb time 46

I use a Shapphire nitro + rx 480 8Gb OC
GPU CLOCK 1342
MEM CLOCK 2000
I have put 16.11.3 drivers with windows 7 64bit i5 2500k

And I use this configuration Claymore's


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal x.x -zpsw x -i 0 -allpools 1 -wd 0 -ttli 80 -tt -75 -fanmax 80 -tstop 95 -r -1 -colors 1

NEED HELP PLEASE  

[denis1995]

I have 2 rigs x6 msi rx480 8gb cards(ellesmere 1303/2000 stock) on win 10, z97 gaming mb and 8gb ram, 1200watt psu.  

Rig 1 has a small overclock of 1350/2100 using afterburner, tried the same on rig 2 and one of the GPU's crashed.  

I am getting roughly 720-750 on each rig, 120 - 130/s per card.  Is there anything else I can do to increase speed?  I'm not sure what mod I would need for the cards bios or how to do memory overclock.  Any help is much appreciated.(I am happy with these speeds but would like to learn how to push the cards harder)

Also, what does undervolting the cards do?  Is that just to lower power consumption or does it help increase speed?

Only 1200? I also have 2 rigs 1 is with 2x xfx 280, gigabyte 280x and r9 390. The other is 4x xfx 280. How much power im using? I have 2x1300w plat. But not sure if i use the powrr at all i cant out watmetter becausr i am already out. Did you know any other method to check the powe that tge rigs are consuming? Thanks you in advanced.

My 2 rigs (7950+7950+280 & 290x+290) are using about 850w, so i think one 7950/280 will take about 150w and 290(x) maybe 200w... so I think your 4x280 rig would take about 600w only...

Ok thanks you.

[denis1995]

Hello, I need help version 5 the claymore's. restart the pc giving a error kernel power. In the log of Claymore's  this


03:05:51:604   5d0   Cannot get Overdrive capabilities for adapter 0
03:05:54:606   5d0   Cannot get Overdrive capabilities for adapter 0
03:05:57:609   5d0   Cannot get Overdrive capabilities for adapter 0
03:05:57:611   5d0   Cannot get Overdrive capabilities for adapter 0
03:05:57:611   5d0   em hbt: 0, fm hbt: 31,
03:05:57:611   5d0   watchdog - thread 0, hb time 31
03:05:57:612   5d0   watchdog - thread 1, hb time 15
03:05:57:612   5d0   watchdog - thread 2, hb time 0
03:05:57:612   5d0   watchdog - thread 3, hb time 46

I use a Shapphire nitro + rx 480 8Gb OC
GPU CLOCK 1342
MEM CLOCK 2000
I have put 16.11.3 drivers with windows 7 64bit i5 2500k

And I use this configuration Claymore's


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal x.x -zpsw x -i 0 -allpools 1 -wd 0 -ttli 80 -tt -75 -fanmax 80 -tstop 95 -r -1 -colors 1

NEED HELP PLEASE  

Kernel power i got this problem a long time ago when i had x1 riser then i switch to usb riser. The problem also cam be from your power because the version 5 is consuming more power

[aaronsace]

Claymore, i got issue with the new 5.0 ver for 1 of 5 rigs. It has 5 GPU and only 2 is working, the others show 0. Previous vers works ok. Nothing has been changing (drivers, config file, etc).

New 5.0 uses GPU a bit more.
You need to downclock your Hawaii cards a bit or increase voltage.
Got similar issues on some of my cards.

That isn't the issue. It's the know 4xx bug, see previous posts to fix.

1. there's no any RX 4** card, only Fiji and Hawaii
2. My RX 480 nitro's were fixed with little memclock drop - or I constatnly have "driver restored" messages.

Run Fiji and Hawaii in separate windows; it's the same bug.

[jary20]

Hello, I need help version 5 the claymore's. restart the pc giving a error kernel power. In the log of Claymore's  this


03:05:51:604   5d0   Cannot get Overdrive capabilities for adapter 0
03:05:54:606   5d0   Cannot get Overdrive capabilities for adapter 0
03:05:57:609   5d0   Cannot get Overdrive capabilities for adapter 0
03:05:57:611   5d0   Cannot get Overdrive capabilities for adapter 0
03:05:57:611   5d0   em hbt: 0, fm hbt: 31,
03:05:57:611   5d0   watchdog - thread 0, hb time 31
03:05:57:612   5d0   watchdog - thread 1, hb time 15
03:05:57:612   5d0   watchdog - thread 2, hb time 0
03:05:57:612   5d0   watchdog - thread 3, hb time 46

I use a Shapphire nitro + rx 480 8Gb OC
GPU CLOCK 1342
MEM CLOCK 2000
I have put 16.11.3 drivers with windows 7 64bit i5 2500k

And I use this configuration Claymore's


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal x.x -zpsw x -i 0 -allpools 1 -wd 0 -ttli 80 -tt -75 -fanmax 80 -tstop 95 -r -1 -colors 1

NEED HELP PLEASE  

Kernel power i got this problem a long time ago when i had x1 riser then i switch to usb riser. The problem also cam be from your power because the version 5 is consuming more power

I run the software and after five minutes the PC is rebooted, I have only one rx 480. That solution?

[lexele]

Should bounce from here. Very low risk/High Reward trade.

Thank you, bro. I've lost 20% today

After seing his post I went to see the definiton of the bull flag: It's the other way round when the waves are going up, whille the zec waves aregoing down => It should continue falling (probably very fast from here, confidence is gone after support on 130 was lost but I'm not an analyst, just my opinion)

[forato]

Should bounce from here. Very low risk/High Reward trade.

Thank you, bro. I've lost 20% today

After seing his post I went to see the definiton of the bull flag: It's the other way round when the waves are going up, whille the zec waves aregoing down => It should continue falling (probably very fast from here, confidence is gone after support on 130 was lost but I'm not an analyst, just my opinion)

Most of guys here like to mine at flypool (me also).. But with this scenario (ZEC looks like is going to die) i am mining at NiceHash (becouse it is in BTC auto trade) and maybe soon i will go back to ETH..

[Integ]

-intensity in reality is not working, does not effect. Consumption power of Tahiti decreased by 10-20 watts under the same settings.
Yes, the performance increase is phenomenal - 66H/s - 94H/s. For Pitcarn as well.

[denis1995]

How to configure porexample the card working at 20% not at 90 or 100?

[marvykkio]

What do you rejoice? It is advantageous when your speed is higher than the other. And when the rate rises in all, you are in relation to other, standing pat are.

It just kills the coin.

Exactly - the only one actually making money is Claymore xD

If you check history, my miner is not x3 faster than others, I just see how fast others miners and release a bit faster version. This time I have to release faster version due to new miner. If people stop this speed racing I'll stop it too, but you know it won't work
Also do note my miner is not for NVidia, not for CPU and not for Linux, so if I release miner with x2 speed, network difficult is not going to raise x2 too.

ENVY IS A BAD DISEASE

remember always depend on yourself, not what others say

[gegstore]

with the 5.0 version my r9 390x don't start