Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[generalt]

Hi. Many thanks for a job well done!
But what happened and how to fix it?
in the latest version 5 all my video show 380x - 0 sols. And it is not even loaded completely. Driver tested 16.11.3, 16.9.2
What could be the problem?

update.
480 and 380 do not work if run in a single window
If you run two separate windows. it works
but writes that long busy and asks you to specify a different port
Whether it is possible to fix?

There's a -mport 0 option to disable the monitoring port or you can specify any other port number you want.

[manoe]

thanks for the help but same result crash

You maybe overclocking with the wrong settings. Memclock 2200 and Memvoltage 1100 works fine here. ZEC needs different values as ETH.

I had the same prob today, but with setting this in the start file and config file -di 0123 -mport 0 -i 2
The isue was fixed after this also i changed the mclock to 1100mv now the rig is rolling fine without errors

[adaseb]

Sometimes the bull flags do work beautifully like in Monero, but its never 100% success rate. If it was my Grandma would be trading.

I didn't expect you guys to actually take the trades, was just more of an observation since this isn't a speculation thread.

Neither of these are bull flags. This one is at least closer since it is in an uptrend (necessary) but actually the real bull flag failed near 0.015 (bearish) and price fell.  Price began to move up again when the established downtrend line was broken to the upside. The ZEC setup was a descending triangle (bearish) which is a continuation pattern not a bull flag at all.  You can't have a bull flag at all time lows but descending triangles occasionally fail and break to the upside but its rather rare.
http://stockcharts.com/school/doku.php?id=chart_school:chart_analysis:chart_patterns:descending_triangle_continuation

We are probably looking at two different times because Neither of them are triangles, both were considered bull flags. You only know its a bull flag when it starts retracing down and spikes up, removes supply and retraces back down to demand area. Either way, it didn't work so lets move on.

[Redrose]

In a day I will release new version. More speed. About 200H/s on stock Nano. Hope it will finally stop this crazy speed racing.

I'll wait for it. I hope that it will fix the problem I'm currently facing with my R9 380 to don't be used (though listed at the beggining, their hashrate stays at 0).

[deadsix]

Can anyone share what the 7950/7970 are getting on Claymore v5? I see a few used ones available for sale cheap, so wanted to check.

[delle54]

I'll wait for it. I hope that it will fix the problem I'm currently facing with my R9 380 to don't be used (though listed at the beggining, their hashrate stays at 0).

THX for the detailed info about your system. My crystal ball tells me you may have to do the following:

A workaround for rigs with mixed cards (Polaris and old cards): start two miners with "-di" option, one for Polaris cards and second for other cards. Use "-mport 0" option to disable port for remote management and avoid red message in second miner.
I will fix it soon.

[adaseb]

Can anyone share what the 7950/7970 are getting on Claymore v5? I see a few used ones available for sale cheap, so wanted to check.

Anywhere from 100-120Sol/s depending on type of memory.

[kinsik]

Can anyone please share the link to R9 290x modded bios for Sappphire 4gb.
Or link to article or tool that can allow easy time starp change insted of direct editing in hexeditor.
Now getting 122 sols only.

[adaseb]

Can anyone please share the link to R9 290x modded bios for Sappphire 4gb.
Or link to article or tool that can allow easy time starp change insted of direct editing in hexeditor.
Now getting 122 sols only.

Search for Stilt BIOS for the 290X. I got the R9 290 and I only get 130Sols so you aren't missing out on too much.

[Redrose]

I'll wait for it. I hope that it will fix the problem I'm currently facing with my R9 380 to don't be used (though listed at the beggining, their hashrate stays at 0).

THX for the detailed info about your system. My crystal ball tells me you may have to do the following:

A workaround for rigs with mixed cards (Polaris and old cards): start two miners with "-di" option, one for Polaris cards and second for other cards. Use "-mport 0" option to disable port for remote management and avoid red message in second miner.
I will fix it soon.

I've found that solution by myself, but I'd prefer to don't have to run two windows, for the space it takes on the screen and for the ability to see the total hashrate in a single window.

[xeridea]

I'll wait for it. I hope that it will fix the problem I'm currently facing with my R9 380 to don't be used (though listed at the beggining, their hashrate stays at 0).

THX for the detailed info about your system. My crystal ball tells me you may have to do the following:

A workaround for rigs with mixed cards (Polaris and old cards): start two miners with "-di" option, one for Polaris cards and second for other cards. Use "-mport 0" option to disable port for remote management and avoid red message in second miner.
I will fix it soon.

I've found that solution by myself, but I'd prefer to don't have to run two windows, for the space it takes on the screen and for the ability to see the total hashrate in a single window.

He said he is fixing it, so it will probably be included in tomorrows speed update.

[olcaytu2005]

So guys, high mem low core is not the trend anymore it seems. Anyone tried clocking with the new miner?

[Redrose]

I'll wait for it. I hope that it will fix the problem I'm currently facing with my R9 380 to don't be used (though listed at the beggining, their hashrate stays at 0).

THX for the detailed info about your system. My crystal ball tells me you may have to do the following:

A workaround for rigs with mixed cards (Polaris and old cards): start two miners with "-di" option, one for Polaris cards and second for other cards. Use "-mport 0" option to disable port for remote management and avoid red message in second miner.
I will fix it soon.

I've found that solution by myself, but I'd prefer to don't have to run two windows, for the space it takes on the screen and for the ability to see the total hashrate in a single window.

He said he is fixing it, so it will probably be included in tomorrows speed update.

Okay, perfect, I'll wait for that update !

So guys, high mem low core is not the trend anymore it seems. Anyone tried clocking with the new miner?

I personally do something like low core standard memory, and I manage to get a bit more than 100 H/s for 75W on an RX 470.

[Golku]

So guys, high mem low core is not the trend anymore it seems. Anyone tried clocking with the new miner?

Im at 1150/1920 with my rx 470 pretty stable and getting 105s

[Kum Zero]

In a day I will release new version. More speed. About 200H/s on stock Nano. Hope it will finally stop this crazy speed racing.

What about older card? On Optiminer I have 80 Sol/s on R9 270, 1050/1500 MHz and only 55 Sol/s on v5.0.

[delle54]

I've found that solution by myself, but I'd prefer to don't have to run two windows, for the space it takes on the screen and for the ability to see the total hashrate in a single window.

ATM it only works with two windows which you can move and even change the size. Just make a right click on the titelbar and go to properties -> layout.
You can see the total hashrate at your pools dashboard.

[IOTUSA]

ZEC below $100  will it be dead by Wednesday?

Well it won't be dead but it sure won't make much sense mining it. By tomorrow ZEC mining should no longer be as profitable as mining ETH/ETC

Except for when all this hr dumps back to eth etc. it too will take a plunge. All in all both coins will be tight on profitability after this. 

You're forgetting about the CPU botnets that will continue to drive the ZEC price down.

Botnets or well, CPU in general will fall out at 200 sol/s per GPU. Just no profit to make running even AWS on carded accounts or botnets past that.

[delle54]

What about older card? On Optiminer I have 80 Sol/s on R9 270, 1050/1500 MHz and only 55 Sol/s on v5.0.

Just be patient. Older cards get faster too. My R9 280X gets about 100 H/s ATM.

[bardacuda]

In a day I will release new version. More speed. About 200H/s on stock Nano. Hope it will finally stop this crazy speed racing.

have the rx 480s and the r9 390s reached the max.

Yes, what about your favourite 390 cards?

So I reached 100H/s on my favorite 390 cards but it can show even more speed.

[Claymore]

In a day I will release new version. More speed. About 200H/s on stock Nano. Hope it will finally stop this crazy speed racing.

have the rx 480s and the r9 390s reached the max.

Yes, what about your favourite 390 cards?

180H/s on stock 390X. 145-150 on stock RX480.