djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
May 13, 2014, 10:20:26 PM |
|
Right, well I've got rid of the setx GPU command, thank you for that!
But is that .bat sufficient? I mean.. It's still not opening..
what kind of error do you have ? may-be adding "-a scrypt" will help also in cudaminer it is -O username.worker:password instead of -u and -p (however I think it should work ?) It's quite hard to really see.. I double click my .bat and the cmd window opens then closes within a matter of a second! I added -a scrypt and changed it to username.worker:password and it still is doing the same as above. It's always used -u and -p add pause at the end of the bat file. You must have a typo somewhere (that's what cuda does when it doesn't know a command)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
May 13, 2014, 10:23:29 PM |
|
not really curious, you are... there is a bat file in the release and there isn't any x64 directory man.... ok now dll file...is missing download the official release from the OP, everything needed is already there. forget it,, its over with that...... now dll is missing..... AND read this before you smart say download it.... I DID INTALED IT ONCE before month ago everything other works not sure I want to help you anymore if you don't tell what dll is missing... that doesn't help if you already installed once, just copy the exe where it was working before
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
ManIkWeet
|
|
May 13, 2014, 10:25:55 PM |
|
djm, smaller quotes, single posts, keep it clean
|
BTC donations: 18fw6ZjYkN7xNxfVWbsRmBvD6jBAChRQVn (thanks!)
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
May 13, 2014, 10:27:36 PM |
|
djm, smaller quotes, single posts, keep it clean (I know I post too much ) I wish I could bitcointalk is not user friendly at that level
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
May 13, 2014, 10:43:22 PM |
|
if you don't tell what dll is missing... that doesn't help mscvr100.dll [/quote] Visual C++ Redistributable 2010,2012.... which one for ccminer-1.0-windows? [/quote] ccminer is compiled with 2010. however I think microsoft distribute a package which include what is needed for x86 or x64 (If I remember well)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
Lizzardis
Newbie
Offline
Activity: 106
Merit: 0
|
|
May 13, 2014, 10:48:30 PM |
|
add pause at the end of the bat file. You must have a typo somewhere (that's what cuda does when it doesn't know a command)
What an idiot. Thank you so much for this. I added pause on a new line, and as it turns out.. I was using the wrong cudaminer all along. I was trying to use the x64 bit version on an x86 bit machine. I feel like an idiot. Thank you for this.. You really helped! Now I'm mining away smoothly again!
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3206
Merit: 1003
|
|
May 13, 2014, 10:52:52 PM |
|
do you mind sending me your bat file please thanks
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
May 13, 2014, 11:07:06 PM |
|
if you don't tell what dll is missing... that doesn't help mscvr100.dll I am usually polite, but "fuck you". You don't like the help you get, get find it elsewhere.
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
ivanlabrie
|
|
May 14, 2014, 12:57:39 AM |
|
One more ignored fella...
|
|
|
|
ovidus
Newbie
Offline
Activity: 44
Merit: 0
|
|
May 14, 2014, 01:27:28 AM |
|
One more ignored fella...
+1
|
|
|
|
sprezzatura
Newbie
Offline
Activity: 2
Merit: 0
|
|
May 14, 2014, 04:16:06 AM |
|
Hello everyone, I've been mining less than a week, I have a single 560Ti that I've managed to pool Dogecoin successfully and have been trying to do some Diamond. I have the ccminer2.1 running on a pool right now, but I'm getting about 66% efficiency. I assume this is because I'm using a push/pull pool (digsys.bg). And it looks like I can't get stratum to work because of the error mentioned earlier. I've attempted to compile it from Git but have been having problems with that and was trying to run the ccminer_diamond_gtx exe's that were posted upthread, but I get a libcurl.dll missing error. Going to switch back over to Doge mining on CUDAminer and go to bed, but if anyone can point me to a solution to get a valid executable, either precompiled or help with compiling my own, it would be appreciated. I was trying to compile but wound up downloading the CUDA 5.0 instead of 5.5. I tried changing the include statements to point to the files I had but ran into an issue on compile. I guess my first question is confirmation whether I need to include the 2.1 CUDA files and change the references, or get the 5.5 ones in there and change a flag or something in the headers. On another note, I was looking at DMD and Doge because of their placement on this list: http://www.coinchoose.com/. Am I doing the right thing here? Are any of you guys making money doing this, or is it just a hobby for you. I figured this would be a good opportunity to get some coins in a new currency and hold on to them for long term. Am I wasting my time? Thanks for all the help from everyone in the past 10-20 pages of this post!
|
|
|
|
RavenX
Member
Offline
Activity: 112
Merit: 10
|
|
May 14, 2014, 04:26:50 AM |
|
Thus far in one post: 1700KH - X11 3.3MH - groestl 6.4MH - myr-gr 12MH - Heavy and/or Hefty1 (MNR) 92MH - Fugue 296KH - scrypt 4MH - jackpot 3.5KH - scrypt-jane (YAC) --algo=scrypt-jane:YAC -l t4x16 -C 2 -b 4096 -m 1 -i 0 -L 2 150KH - scrypt-N (ie 2048) 3.1MH - Quark 5MH - TalkCoin ? - keccak ? - AnimeCoin
Anime equals Quark.
|
|
|
|
gpuminer
|
|
May 14, 2014, 05:54:24 AM Last edit: May 14, 2014, 08:34:07 AM by gpuminer |
|
Anyone can help with this ?
I am running 6 x gtx 750 ti using x11. A single card I can run around 1.7 mh about 10% CPU usage by ccminer. However , when I run 6 cards at once , all card run around 1.55 mh and ccminer take about 90-95% CPU usage. Anybody know how to fix this ? I tried running single and multiple instance , it all yield the same result. I am afraid my CPU will go down first before my gpu if running 24/7 with 90-95% load. I am using windows 8.1
|
|
|
|
Tyr808
Sr. Member
Offline
Activity: 606
Merit: 278
06/19/11 17:51 Bought BTC 259684.77 for 0.0101
|
|
May 14, 2014, 06:13:24 AM |
|
Anyone can help with this ?
I am running 6 x gtx 750 ti using x11. A single card I can run around 1.7 mh about 10% CPU usage by ccminer. However , when I run 6 cards at once , all card run around 1.55 mh and ccminer take about 90-95% CPU usage. Anybody know how to fix this ? I tired running single and multiple instance , it all yield the same result. I am afraid my CPU will go down first before my gpu if running 24/7 with 90-95% load. I am using windows 8.1
I too wish there was a way to throttle and control performance like we can with cudaminer. I figure it's not easy to implement but I've tried everything as far as controlling performance with no real luck. Sorry to not be able to contribute towards a solution, but I'm chiminig in for awareness if anyone can help. I believe Bigjme runs 6x 750's as well, perhaps try asking him? I only have one at the moment.
|
|
|
|
leofur
Member
Offline
Activity: 117
Merit: 10
|
|
May 14, 2014, 06:15:36 AM |
|
Anyone can help with this ?
I am running 6 x gtx 750 ti using x11. A single card I can run around 1.7 mh about 10% CPU usage by ccminer. However , when I run 6 cards at once , all card run around 1.55 mh and ccminer take about 90-95% CPU usage. Anybody know how to fix this ? I tired running single and multiple instance , it all yield the same result. I am afraid my CPU will go down first before my gpu if running 24/7 with 90-95% load. I am using windows 8.1
I have the same issue.. I'm running Windows 7... When I run only one card it runs at 1750 khash, when I run the all 6 cards, it drops to 1400 per card.
|
|
|
|
gpuminer
|
|
May 14, 2014, 06:36:51 AM |
|
Hopefully the new version for x11 can solve this problem.
|
|
|
|
bigjme
|
|
May 14, 2014, 06:52:06 AM |
|
Ok to the new guys, run it with -q to drop cpu usage. Always use a decent cpu, amd cpu's are known to struggle. The typical amd likes ati, nvidia likes intel bs that we are all use to.
Ive ran 6 instances over 3 cards at 7% usage. Thats windows 7 and 8.1 On a intel xeon e3-1230v2
|
Owner of: cudamining.co.uk
|
|
|
leofur
Member
Offline
Activity: 117
Merit: 10
|
|
May 14, 2014, 06:55:04 AM |
|
Ok to the new guys, run it with -q to drop cpu usage. Always use a decent cpu, amd cpu's are known to struggle. The typical amd likes ati, nvidia likes intel bs that we are all use to.
Ive ran 6 instances over 3 cards at 7% usage. Thats windows 7 and 8.1 On a intel xeon e3-1230v2
I use celeron CPU, guess that whats causing it... :/ never had a problem with other algos...
|
|
|
|
bigjme
|
|
May 14, 2014, 06:56:34 AM |
|
Some use more then others. I can mine 6 instances of heavycoin on 1% yet 3 instances on jackpot coin take 7%
Its not all down to the algo implementation. Some of them the system has to send more to the gpu
|
Owner of: cudamining.co.uk
|
|
|
gpuminer
|
|
May 14, 2014, 07:11:21 AM |
|
Ok to the new guys, run it with -q to drop cpu usage. Always use a decent cpu, amd cpu's are known to struggle. The typical amd likes ati, nvidia likes intel bs that we are all use to.
Ive ran 6 instances over 3 cards at 7% usage. Thats windows 7 and 8.1 On a intel xeon e3-1230v2
running x11 ? Or some other algo ? I think the high CPU usage is specific to x11. I run using -q , i am getting same high CPU load result (90-95%).
|
|
|
|
|