ltcnim
Legendary
Offline
Activity: 914
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 22, 2013, 04:26:53 PM |
|
You are not using it for mining. The pool is handling this for you, its ok to forward it from the pool to there.
They are referring to p2p miners, who should not be using an exchange address. Also solo miners I guess. You have the benefit of a pool address so this doesnt apply to you, there is a cost to sending though but its pretty small usually. The miners in those cases are creating coins, I think this is why it wont work
alright, thanks a lot!
|
|
|
|
|
nicksmith
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 22, 2013, 06:59:11 PM |
|
Looks nice, I made the first one and lost interest, send me a pm when you finish yours and I'll pull mine from the market!
|
|
|
|
Symbiont
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 22, 2013, 07:35:20 PM |
|
Hi, I´m new at the pool. I´m running 11 GPUs at around 6500 MHash.
My problem is, that I have a lot of invalid shares. Mostly around 50%!!! Is it normal for DOGE? If yes, DOGE isn´t a good coin to mine, because the profitability is not 50, it´s 50% of 50 = 25.
At the moment I´ve:
Valid Round Shares = 38336 Invalid Round Shares = 12096 Your Efficiency = 76.02%
Normally when I mine LTC, I´ve max. 1% of invalid.
What can I do?
Edit: I´ve 11 worker at the pool. 1 for each GPU. Is it better to run all GPUs on only 1 worker?
Something is seriously awry. I'd run as much GPUs as you can on one worker, per instance of your software miner. For example, I have 3 rigs, so I have 3 workers, each has one instance of cgminer. My invalids are < 1%. Also make sure your difficulty is scaled accordingly, the recommendations are on the help page. M Thx. I took the difficulty from the help content. All my cards are set on 64 at the pool and inside my miner. Could it be, because of my many single workers? Could it be a disadvantage to set it to 32 or 16? I´ve x280 cards with around 700 MHash.
|
|
|
|
Mevius
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 99
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 22, 2013, 09:04:23 PM |
|
Crashed twice on me already. I send in the report so maybe u can have a look at it.
|
Een goeie tukker is geen motherfucker!
|
|
|
CarbonAssassin
Newbie
Offline
Activity: 37
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 22, 2013, 09:26:52 PM |
|
Crashed twice on me already. I send in the report so maybe u can have a look at it. Yeah just fixing it now ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Thanks for that!
|
|
|
|
Symbiont
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2013, 12:05:47 AM |
|
Hi, I´m new at the pool. I´m running 11 GPUs at around 6500 MHash.
My problem is, that I have a lot of invalid shares. Mostly around 50%!!! Is it normal for DOGE? If yes, DOGE isn´t a good coin to mine, because the profitability is not 50, it´s 50% of 50 = 25.
At the moment I´ve:
Valid Round Shares = 38336 Invalid Round Shares = 12096 Your Efficiency = 76.02%
Normally when I mine LTC, I´ve max. 1% of invalid.
What can I do?
Edit: I´ve 11 worker at the pool. 1 for each GPU. Is it better to run all GPUs on only 1 worker?
Something is seriously awry. I'd run as much GPUs as you can on one worker, per instance of your software miner. For example, I have 3 rigs, so I have 3 workers, each has one instance of cgminer. My invalids are < 1%. Also make sure your difficulty is scaled accordingly, the recommendations are on the help page. M Thx. I took the difficulty from the help content. All my cards are set on 64 at the pool and inside my miner. Could it be, because of my many single workers? Could it be a disadvantage to set it to 32 or 16? I´ve x280 cards with around 700 MHash. I still need some help, please. I set all my GPUs on one worker. It doesn´t help. I still have a lot of invalids. I´m mining on the EU pool. Are there some problems with the server? At the moment: 10 Minute Hash Rate 5907 Kh/s Valid Round Shares 13056 Invalid Round Shares 9024 Your Efficiency 59.13% Edit: I even tried dif. of 16 and 32. It´s worse. Between 64 and 256 is no difference.
|
|
|
|
mdude77
Legendary
Offline
Activity: 1540
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2013, 01:12:36 AM |
|
I still need some help, please. I set all my GPUs on one worker. It doesn´t help. I still have a lot of invalids. I´m mining on the EU pool. Are there some problems with the server?
At the moment:
10 Minute Hash Rate 5907 Kh/s Valid Round Shares 13056 Invalid Round Shares 9024 Your Efficiency 59.13%
Edit: I even tried dif. of 16 and 32. It´s worse. Between 64 and 256 is no difference.
Can you combine workers by using fewer instances of your miner? Also watching the output from your miner should help give you a clue where things are going wrong. The only time I see rejects is when the pool changes blocks, and it's rare, certainly not always. M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
mdude77
Legendary
Offline
Activity: 1540
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2013, 01:17:36 AM |
|
ed some help, please. I set all my GPUs on one worker. It doesn´t help. I still have a lot of invalids. I´m mining on the EU pool. Are there some problems with the server?
At the moment:
10 Minute Hash Rate 5907 Kh/s Valid Round Shares 13056 Invalid Round Shares 9024 Your Efficiency 59.13%
Edit: I even tried dif. of 16 and 32. It´s worse. Between 64 and 256 is no difference.
Also, what miner are you using? I'm using cgminer 3.7.2 with a bunch of r9 280x's, averaging about 1% reject rate. M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
Symbiont
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2013, 01:34:57 AM |
|
ed some help, please. I set all my GPUs on one worker. It doesn´t help. I still have a lot of invalids. I´m mining on the EU pool. Are there some problems with the server?
At the moment:
10 Minute Hash Rate 5907 Kh/s Valid Round Shares 13056 Invalid Round Shares 9024 Your Efficiency 59.13%
Edit: I even tried dif. of 16 and 32. It´s worse. Between 64 and 256 is no difference.
Also, what miner are you using? I'm using cgminer 3.7.2 with a bunch of r9 280x's, averaging about 1% reject rate. M Thanks for your help. I´m using "guiminer script alpha". All drivers are new, fresh system (win 7, 32 and win 8, 64). I´ve used this setting since 2 weeks without any problems <1% invalids to mine LTC at another pool. I tried different dif. - no change. I tried 11 worker and only 1 worker for all GPUs - no change. Hash rate is fine, but my miner tells me around 10 - 15% invalids. Pool tells me between 50 and 10% invalid. If the pool is changing the invalids are going to 50%.
|
|
|
|
mdude77
Legendary
Offline
Activity: 1540
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2013, 01:53:09 AM |
|
ed some help, please. I set all my GPUs on one worker. It doesn´t help. I still have a lot of invalids. I´m mining on the EU pool. Are there some problems with the server?
At the moment:
10 Minute Hash Rate 5907 Kh/s Valid Round Shares 13056 Invalid Round Shares 9024 Your Efficiency 59.13%
Edit: I even tried dif. of 16 and 32. It´s worse. Between 64 and 256 is no difference.
Also, what miner are you using? I'm using cgminer 3.7.2 with a bunch of r9 280x's, averaging about 1% reject rate. M Thanks for your help. I´m using "guiminer script alpha". All drivers are new, fresh system (win 7, 32 and win 8, 64). I´ve used this setting since 2 weeks without any problems <1% invalids to mine LTC at another pool. I tried different dif. - no change. I tried 11 worker and only 1 worker for all GPUs - no change. Hash rate is fine, but my miner tells me around 10 - 15% invalids. Pool tells me between 50 and 10% invalid. If the pool is changing the invalids are going to 50%. Can you try cgminer 3.7.2? check out the litecoin hardware comparison site for tips on how to configure yours. https://litecoin.info/Mining_hardware_comparisonThat's what I used to configure mine, and I get identical results to what's listed there. M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
ghostlander
Legendary
Offline
Activity: 1241
Merit: 1020
No surrender, no retreat, no regret.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2013, 02:11:23 AM |
|
Flound, your PXC pool pays half the reward to miners for over a month. When the last hard fork took place on the 16-Nov-2013 (block #154000), block reward increased from 25 to 50 PXC. You calculate it at 25 PXC still. The miners receive half their profit.
Well, shit.. No wonder nobody is mining PXC here. You're actually the first person to point this out. The problem's been fixed but I only have payout records going back 7 days now.. I will think about how I can compensate people. You have transaction logs. I guess you can repeat all PXC transactions made after the hard fork.
|
|
|
|
Symbiont
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2013, 09:46:27 AM |
|
ed some help, please. I set all my GPUs on one worker. It doesn´t help. I still have a lot of invalids. I´m mining on the EU pool. Are there some problems with the server?
At the moment:
10 Minute Hash Rate 5907 Kh/s Valid Round Shares 13056 Invalid Round Shares 9024 Your Efficiency 59.13%
Edit: I even tried dif. of 16 and 32. It´s worse. Between 64 and 256 is no difference.
Also, what miner are you using? I'm using cgminer 3.7.2 with a bunch of r9 280x's, averaging about 1% reject rate. M Thanks for your help. I´m using "guiminer script alpha". All drivers are new, fresh system (win 7, 32 and win 8, 64). I´ve used this setting since 2 weeks without any problems <1% invalids to mine LTC at another pool. I tried different dif. - no change. I tried 11 worker and only 1 worker for all GPUs - no change. Hash rate is fine, but my miner tells me around 10 - 15% invalids. Pool tells me between 50 and 10% invalid. If the pool is changing the invalids are going to 50%. Can you try cgminer 3.7.2? check out the litecoin hardware comparison site for tips on how to configure yours. https://litecoin.info/Mining_hardware_comparisonThat's what I used to configure mine, and I get identical results to what's listed there. M Ok. Tried a lot this night. The Problem are the EU server. With EU server 10 - 15% and up to 70%(!!!) invalid shares. Same settings now with the US server (and I´m from Germany) only 1-2% invalid shares. Thats fine for me. Admin, you should take a look at the EU server!!! Thanks to all, who tried to help me. Wish I had tried US server first and not after hours of tuning my settings and system - what´s no fun with 4 rigs and 11 GPUs ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
ollebolls
Newbie
Offline
Activity: 23
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2013, 09:50:35 AM |
|
Hey is it possible to add Infinitecoin (IFC)?
Thanks
|
|
|
|
mdude77
Legendary
Offline
Activity: 1540
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2013, 10:15:21 AM |
|
Ok. Tried a lot this night. The Problem are the EU server. With EU server 10 - 15% and up to 70%(!!!) invalid shares. Same settings now with the US server (and I´m from Germany) only 1-2% invalid shares. Thats fine for me. Admin, you should take a look at the EU server!!! Thanks to all, who tried to help me. Wish I had tried US server first and not after hours of tuning my settings and system - what´s no fun with 4 rigs and 11 GPUs ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) That's odd. I've used both EU and US without problems. Glad you're working now! M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
emece67
Newbie
Offline
Activity: 11
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2013, 10:50:34 AM |
|
Ok. Tried a lot this night. The Problem are the EU server. With EU server 10 - 15% and up to 70%(!!!) invalid shares. Same settings now with the US server (and I´m from Germany) only 1-2% invalid shares. Thats fine for me. Admin, you should take a look at the EU server!!! Thanks to all, who tried to help me. Wish I had tried US server first and not after hours of tuning my settings and system - what´s no fun with 4 rigs and 11 GPUs ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Thanks!! I've also noted an abnormally high % of invalid shares when mining DOGE in the EU pool. CUDAminer reports 8 % invalid (which is high for me, usually it is below 3 %) and the server reports 33 % invalid. Just changed to us server, up to now 100% valid.
|
|
|
|
TrippyPippy
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 110
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2013, 10:55:28 AM |
|
Ok. Tried a lot this night. The Problem are the EU server. With EU server 10 - 15% and up to 70%(!!!) invalid shares. Same settings now with the US server (and I´m from Germany) only 1-2% invalid shares. Thats fine for me. Admin, you should take a look at the EU server!!! Thanks to all, who tried to help me. Wish I had tried US server first and not after hours of tuning my settings and system - what´s no fun with 4 rigs and 11 GPUs ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) That's odd. I've used both EU and US without problems. Glad you're working now! M I agree that there is something wrong with the EU server even on the SHA-256 multiport also. Currently 40%+ regects on the eu server and "only" 15% on us server. Regards
|
|
|
|
Hueristic
Legendary
Offline
Activity: 3934
Merit: 5286
Doomed to see the future and unable to prevent it
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2013, 02:00:43 PM Last edit: December 23, 2013, 02:20:50 PM by Hueristic |
|
figured it out.
|
“Bad men need nothing more to compass their ends, than that good men should look on and do nothing.”
|
|
|
tunth
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2013, 02:11:47 PM |
|
Hi, i m mining single-coin at the moment, and that is MNG. I would like to see more info about what i m mining in my stats-page, instead of the info that i see what the multi-pool is mining at the moment. Can you do that?
|
|
|
|
P1tBull
Newbie
Offline
Activity: 40
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2013, 02:46:40 PM |
|
Hi, i m mining single-coin at the moment, and that is MNG. I would like to see more info about what i m mining in my stats-page, instead of the info that i see what the multi-pool is mining at the moment. Can you do that?
Click on Statistics > MNC Icon > My stats
|
|
|
|
|