[ANN][The Original Multipool - Scrypt/SHA256/Scrypt-N/X11] multipool.us

[ltcnim]

You are not using it for mining.  The pool is handling this for you, its ok to forward it from the pool to there.

They are referring to p2p miners, who should not be using an exchange address.  Also solo miners I guess.   You have the benefit of a pool address so this doesnt apply to you, there is a cost to sending though but its pretty small usually.
   The miners in those cases are creating coins, I think this is why it wont work

alright, thanks a lot!

[CarbonAssassin]

Hey guys!

Been using this pool alot and thought the android app really needed somework so ive released a simple and clean stats app. It doesn't have very many features at the moment and probably a few bugs but it works much better than what we have at the moment! Heres the link:

https://play.google.com/store/apps/details?id=carbon.assassin.multipool&hl=en_GB

[nicksmith]

Hey guys!

Been using this pool alot and thought the android app really needed somework so ive released a simple and clean stats app. It doesn't have very many features at the moment and probably a few bugs but it works much better than what we have at the moment! Heres the link:

https://play.google.com/store/apps/details?id=carbon.assassin.multipool&hl=en_GB

Looks nice, I made the first one and lost interest, send me a pm when you finish yours and I'll pull mine from the market!

[Symbiont]

Hi, I´m new at the pool. I´m running 11 GPUs at around 6500 MHash.

My problem is, that I have a lot of invalid shares. Mostly around 50%!!! Is it normal for DOGE? If yes, DOGE isn´t a good coin to mine, because the profitability is not 50, it´s 50% of 50 = 25.

At the moment I´ve:

Valid Round Shares = 38336
Invalid Round Shares = 12096
Your Efficiency = 76.02%

Normally when I mine LTC, I´ve max. 1% of invalid.

What can I do?

Edit: I´ve 11 worker at the pool. 1 for each GPU. Is it better to run all GPUs on only 1 worker?

Something is seriously awry.  I'd run as much GPUs as you can on one worker, per instance of your software miner.  For example, I have 3 rigs, so I have 3 workers, each has one instance of cgminer.  My invalids are < 1%.  Also make sure your difficulty is scaled accordingly, the recommendations are on the help page.

M

Thx. I took the difficulty from the help content. All my cards are set on 64 at the pool and inside my miner. Could it be, because of my many single workers? Could it be a disadvantage to set it to 32 or 16? I´ve x280 cards with around 700 MHash.

[Mevius]

Hey guys!

Been using this pool alot and thought the android app really needed somework so ive released a simple and clean stats app. It doesn't have very many features at the moment and probably a few bugs but it works much better than what we have at the moment! Heres the link:

https://play.google.com/store/apps/details?id=carbon.assassin.multipool&hl=en_GB

Crashed twice on me already. I send in the report so maybe u can have a look at it.

[CarbonAssassin]

Hey guys!

Been using this pool alot and thought the android app really needed somework so ive released a simple and clean stats app. It doesn't have very many features at the moment and probably a few bugs but it works much better than what we have at the moment! Heres the link:

https://play.google.com/store/apps/details?id=carbon.assassin.multipool&hl=en_GB

Crashed twice on me already. I send in the report so maybe u can have a look at it.

Yeah just fixing it now Thanks for that!

[Symbiont]

Hi, I´m new at the pool. I´m running 11 GPUs at around 6500 MHash.

My problem is, that I have a lot of invalid shares. Mostly around 50%!!! Is it normal for DOGE? If yes, DOGE isn´t a good coin to mine, because the profitability is not 50, it´s 50% of 50 = 25.

At the moment I´ve:

Valid Round Shares = 38336
Invalid Round Shares = 12096
Your Efficiency = 76.02%

Normally when I mine LTC, I´ve max. 1% of invalid.

What can I do?

Edit: I´ve 11 worker at the pool. 1 for each GPU. Is it better to run all GPUs on only 1 worker?

Something is seriously awry.  I'd run as much GPUs as you can on one worker, per instance of your software miner.  For example, I have 3 rigs, so I have 3 workers, each has one instance of cgminer.  My invalids are < 1%.  Also make sure your difficulty is scaled accordingly, the recommendations are on the help page.

M

Thx. I took the difficulty from the help content. All my cards are set on 64 at the pool and inside my miner. Could it be, because of my many single workers? Could it be a disadvantage to set it to 32 or 16? I´ve x280 cards with around 700 MHash.

I still need some help, please. I set all my GPUs on one worker. It doesn´t help. I still have a lot of invalids. I´m mining on the EU pool. Are there some problems with the server?

At the moment:

10 Minute Hash Rate 5907 Kh/s
Valid Round Shares 13056
Invalid Round Shares 9024
Your Efficiency 59.13%

Edit: I even tried dif. of 16 and 32. It´s worse. Between 64 and 256 is no difference. 

[mdude77]

I still need some help, please. I set all my GPUs on one worker. It doesn´t help. I still have a lot of invalids. I´m mining on the EU pool. Are there some problems with the server?

At the moment:

10 Minute Hash Rate 5907 Kh/s
Valid Round Shares 13056
Invalid Round Shares 9024
Your Efficiency 59.13%

Edit: I even tried dif. of 16 and 32. It´s worse. Between 64 and 256 is no difference. 

Can you combine workers by using fewer instances of your miner? 

Also watching the output from your miner should help give you a clue where things are going wrong.  The only time I see rejects is when the pool changes blocks, and it's rare, certainly not always. 

M

[mdude77]

ed some help, please. I set all my GPUs on one worker. It doesn´t help. I still have a lot of invalids. I´m mining on the EU pool. Are there some problems with the server?

At the moment:

10 Minute Hash Rate 5907 Kh/s
Valid Round Shares 13056
Invalid Round Shares 9024
Your Efficiency 59.13%

Edit: I even tried dif. of 16 and 32. It´s worse. Between 64 and 256 is no difference. 

Also, what miner are you using?  I'm using cgminer 3.7.2 with a bunch of r9 280x's, averaging about 1% reject rate.

M

[Symbiont]

ed some help, please. I set all my GPUs on one worker. It doesn´t help. I still have a lot of invalids. I´m mining on the EU pool. Are there some problems with the server?

At the moment:

10 Minute Hash Rate 5907 Kh/s
Valid Round Shares 13056
Invalid Round Shares 9024
Your Efficiency 59.13%

Edit: I even tried dif. of 16 and 32. It´s worse. Between 64 and 256 is no difference. 

Also, what miner are you using?  I'm using cgminer 3.7.2 with a bunch of r9 280x's, averaging about 1% reject rate.

M

Thanks for your help. I´m using "guiminer script alpha". All drivers are new, fresh system (win 7, 32 and win 8, 64). I´ve used this setting since 2 weeks without any problems <1% invalids to mine LTC at another pool. I tried different dif. - no change. I tried 11 worker and only 1 worker for all GPUs - no change. Hash rate is fine, but my miner tells me around 10 - 15% invalids. Pool tells me between 50 and 10% invalid. If the pool is changing the invalids are going to 50%.

[mdude77]

ed some help, please. I set all my GPUs on one worker. It doesn´t help. I still have a lot of invalids. I´m mining on the EU pool. Are there some problems with the server?

At the moment:

10 Minute Hash Rate 5907 Kh/s
Valid Round Shares 13056
Invalid Round Shares 9024
Your Efficiency 59.13%

Edit: I even tried dif. of 16 and 32. It´s worse. Between 64 and 256 is no difference. 

Also, what miner are you using?  I'm using cgminer 3.7.2 with a bunch of r9 280x's, averaging about 1% reject rate.

M

Thanks for your help. I´m using "guiminer script alpha". All drivers are new, fresh system (win 7, 32 and win 8, 64). I´ve used this setting since 2 weeks without any problems <1% invalids to mine LTC at another pool. I tried different dif. - no change. I tried 11 worker and only 1 worker for all GPUs - no change. Hash rate is fine, but my miner tells me around 10 - 15% invalids. Pool tells me between 50 and 10% invalid. If the pool is changing the invalids are going to 50%.

Can you try cgminer 3.7.2?  check out the litecoin hardware comparison site for tips on how to configure yours.  https://litecoin.info/Mining_hardware_comparison

That's what I used to configure mine, and I get identical results to what's listed there.

M

[ghostlander]

Flound, your PXC pool pays half the reward to miners for over a month. When the last hard fork took place on the 16-Nov-2013 (block #154000), block reward increased from 25 to 50 PXC. You calculate it at 25 PXC still. The miners receive half their profit.

Well, shit.. No wonder nobody is mining PXC here.

You're actually the first person to point this out.

The problem's been fixed but I only have payout records going back 7 days now..  I will think about how I can compensate people.

You have transaction logs. I guess you can repeat all PXC transactions made after the hard fork.

[Symbiont]

ed some help, please. I set all my GPUs on one worker. It doesn´t help. I still have a lot of invalids. I´m mining on the EU pool. Are there some problems with the server?

At the moment:

10 Minute Hash Rate 5907 Kh/s
Valid Round Shares 13056
Invalid Round Shares 9024
Your Efficiency 59.13%

Edit: I even tried dif. of 16 and 32. It´s worse. Between 64 and 256 is no difference. 

Also, what miner are you using?  I'm using cgminer 3.7.2 with a bunch of r9 280x's, averaging about 1% reject rate.

M

Thanks for your help. I´m using "guiminer script alpha". All drivers are new, fresh system (win 7, 32 and win 8, 64). I´ve used this setting since 2 weeks without any problems <1% invalids to mine LTC at another pool. I tried different dif. - no change. I tried 11 worker and only 1 worker for all GPUs - no change. Hash rate is fine, but my miner tells me around 10 - 15% invalids. Pool tells me between 50 and 10% invalid. If the pool is changing the invalids are going to 50%.

Can you try cgminer 3.7.2?  check out the litecoin hardware comparison site for tips on how to configure yours.  https://litecoin.info/Mining_hardware_comparison

That's what I used to configure mine, and I get identical results to what's listed there.

M

Ok. Tried a lot this night. The Problem are the EU server. With EU server 10 - 15% and up to 70%(!!!) invalid shares. Same settings now with the US server (and I´m from Germany) only 1-2% invalid shares. Thats fine for me.

Admin, you should take a look at the EU server!!!

Thanks to all, who tried to help me. Wish I had tried US server first and not after hours of tuning my settings and system - what´s no fun with 4 rigs and 11 GPUs

[ollebolls]

Hey is it possible to add Infinitecoin (IFC)?

Thanks

[mdude77]

Ok. Tried a lot this night. The Problem are the EU server. With EU server 10 - 15% and up to 70%(!!!) invalid shares. Same settings now with the US server (and I´m from Germany) only 1-2% invalid shares. Thats fine for me.

Admin, you should take a look at the EU server!!!

Thanks to all, who tried to help me. Wish I had tried US server first and not after hours of tuning my settings and system - what´s no fun with 4 rigs and 11 GPUs

That's odd.  I've used both EU and US without problems.

Glad you're working now!

M

[emece67]

Ok. Tried a lot this night. The Problem are the EU server. With EU server 10 - 15% and up to 70%(!!!) invalid shares. Same settings now with the US server (and I´m from Germany) only 1-2% invalid shares. Thats fine for me.

Admin, you should take a look at the EU server!!!

Thanks to all, who tried to help me. Wish I had tried US server first and not after hours of tuning my settings and system - what´s no fun with 4 rigs and 11 GPUs

Thanks!! I've also noted an abnormally high % of invalid shares when mining DOGE in the EU pool. CUDAminer reports 8 % invalid (which is high for me, usually it is below 3 %) and the server reports 33 % invalid. Just changed to us server, up to now 100% valid.

[TrippyPippy]

Ok. Tried a lot this night. The Problem are the EU server. With EU server 10 - 15% and up to 70%(!!!) invalid shares. Same settings now with the US server (and I´m from Germany) only 1-2% invalid shares. Thats fine for me.

Admin, you should take a look at the EU server!!!

Thanks to all, who tried to help me. Wish I had tried US server first and not after hours of tuning my settings and system - what´s no fun with 4 rigs and 11 GPUs

That's odd.  I've used both EU and US without problems.

Glad you're working now!

M

I agree that there is something wrong with the EU server even on the SHA-256 multiport also.

Currently 40%+ regects on the eu server and "only" 15% on us server.

Regards

[Hueristic]

figured it out.

[tunth]

Hi, i m mining single-coin at the moment, and that is MNG.
I would like to see more info about what i m mining in my stats-page, instead of the info that i see what the multi-pool is mining at the moment.
Can you do that?

[P1tBull]

Hi, i m mining single-coin at the moment, and that is MNG.
I would like to see more info about what i m mining in my stats-page, instead of the info that i see what the multi-pool is mining at the moment.
Can you do that?

Click on Statistics > MNC Icon > My stats