OLD: BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB

[Beastlymac]

3.5.1x32 running under win7x64 WoW playing nice with BES, BF1, and NFY puhahahahha

Nice USB setup hopefully my one can rival the spread of devices soon.

[1715561700]

1715561700

[1715561700]

1715561700

[1715561700]

1715561700

[1715561700]

1715561700

[Taugeran]

3.5.1x32 running under win7x64 WoW playing nice with BES, BF1, and NFY puhahahahha

Nice USB setup hopefully my one can rival the spread of devices soon.

 

[pluMmet]

When I remote into my Ubuntu BFG rig the terminal window running BFGminer is not there... I had been just shutting it down and restarting but now I need to trouble shoot why all my equipment seems to be running fine while my pool shows it's not so I need to review the already running terminal.

Kindly help the linux n00b ?

Also how are people getting the terminal to display all their hardware.. I can't drag the window larger and can only see the first 6 or 7 pieces of equipment.

[Mudbankkeith]

When I remote into my Ubuntu BFG rig the terminal window running BFGminer is not there... I had been just shutting it down and restarting but now I need to trouble shoot why all my equipment seems to be running fine while my pool shows it's not so I need to review the already running terminal.

Kindly help the linux n00b ?

Also how are people getting the terminal to display all their hardware.. I can't drag the window larger and can only see the first 6 or 7 pieces of equipment.

Right click your mouse over the window, then you get a settings menue (look in properties)

[Nighthawkxx]

i can't get bfgminer to pickup on the .so files for libhidapi on raspian wheezy


from ~/

Code:

git clone https://github.com/signal11/hidapi && git clone https://github.com/luke-jr/bfgminer

cd hidapi
./bootstrap
./configure
make -j2
make install

I also tried your procedure to get my Hasbuster Nano working with the new bfgminer on raspian wheezy and encounterd the same issue.
Remembered something about a prefix parameter for the configure command after reading the hidapi readme a few days ago and decided to give it a try.
After the hidapi recompile, bfgminer recognised my Hashbuster Nano. Maybe this also works for you.
My Hashbuster Nano still doesn't work on my Raspberry Pi, the hash rate rapidly decreases to 0 GH/S.

Code:

cd hidapi
./bootstrap
./configure --prefix=/usr
make -j2
make install

[pluMmet]

When I remote into my Ubuntu BFG rig the terminal window running BFGminer is not there... I had been just shutting it down and restarting but now I need to trouble shoot why all my equipment seems to be running fine while my pool shows it's not so I need to review the already running terminal.

Kindly help the linux n00b ?

Also how are people getting the terminal to display all their hardware.. I can't drag the window larger and can only see the first 6 or 7 pieces of equipment.

Right click your mouse over the window, then you get a settings menue (look in properties)

Okay I can make it big now thanks

I still cant open the already running BFG terminal which is hidden when I reconnect thru remote...

[Illutian]

I still cant open the already running BFG terminal which is hidden when I reconnect thru remote...

I think this is a Linux 'issue'/'feature'. I run a Debian-based system and If I RDP into it on my Windows box and launch stuff, any thing. And then use RDP over SSH from my phone. None of the stuff I've opened will show up. And vice versa...so at night I have to remember to remote in on my phone in case I need to later restart something.  

*At least it sounds like you're asking about the same thing I've noticed.

[pluMmet]

I still cant open the already running BFG terminal which is hidden when I reconnect thru remote...

I think this is a Linux 'issue'/'feature'. I run a Debian-based system and If I RDP into it on my Windows box and launch stuff, any thing. And then use RDP over SSH from my phone. None of the stuff I've opened will show up. And vice versa...so at night I have to remember to remote in on my phone in case I need to later restart something.  

*At least it sounds like you're asking about the same thing I've noticed.

Spot on but I don't like your solution  

I am remoting into an Ubuntu box with a Win7 system... Basically 1 or 2 of my usb erupters goes dead every 2 weeks and I need to reset the system to get it all humming...

But where there is  a need like now I just need to check the running BFG miner to see what is going on but like you said the terminal window is not showing...

[RicRock]

Spot on but I don't like your solution  

I am remoting into an Ubuntu box with a Win7 system... Basically 1 or 2 of my usb erupters goes dead every 2 weeks and I need to reset the system to get it all humming...

But where there is  a need like now I just need to check the running BFG miner to see what is going on but like you said the terminal window is not showing...

What command are you using? Are you using screen?

If you are opening a session, running bfgminer, and then just exiting. Your instance of bfgminer is ending when you exit.

[HellDiverUK]

I use:

screen -dmS bfg bfgminer <your command options>

Then whenever I log in,  to connect to the BFG instance, just use:

screen -x bfg



Hope this helps.

[pluMmet]

Great info, Thanks guys 

[HellDiverUK]

Anyone got these BlueFury miners actually working?  I've mine 'mining' with 100% error rates.   

I'm using:

bfgminer -S bigpic:all

Also tried:

bfgminer -S BF1:all


Running bfgminer 3.5.1 on OpenWRT.

[Luke-Jr]

Anyone got these BlueFury miners actually working?  I've mine 'mining' with 100% error rates.   

I'm using:

bfgminer -S bigpic:all

Also tried:

bfgminer -S BF1:all


Running bfgminer 3.5.1 on OpenWRT.

I wonder if there's an alignment or endian issue... can you confirm whether it works or not on a x86 system?
What OpenWrt platform?

[HellDiverUK]

Anyone got these BlueFury miners actually working?  I've mine 'mining' with 100% error rates.   

I'm using:

bfgminer -S bigpic:all

Also tried:

bfgminer -S BF1:all


Running bfgminer 3.5.1 on OpenWRT.

I wonder if there's an alignment or endian issue... can you confirm whether it works or not on a x86 system?
What OpenWrt platform?

It's on a TPLink TN-WDR3600, which is ar71xx

I don't actually have a x86 system here at the moment other than a Macbook Pro.

[Luke-Jr]

Anyone got these BlueFury miners actually working?  I've mine 'mining' with 100% error rates.   

I'm using:

bfgminer -S bigpic:all

Also tried:

bfgminer -S BF1:all


Running bfgminer 3.5.1 on OpenWRT.

I wonder if there's an alignment or endian issue... can you confirm whether it works or not on a x86 system?
What OpenWrt platform?

It's on a TPLink TN-WDR3600, which is ar71xx

I don't actually have a x86 system here at the moment other than a Macbook Pro.

Macbook Pro would work for a test...

[HellDiverUK]

Anyone got these BlueFury miners actually working?  I've mine 'mining' with 100% error rates.   

I'm using:

bfgminer -S bigpic:all

Also tried:

bfgminer -S BF1:all


Running bfgminer 3.5.1 on OpenWRT.

I wonder if there's an alignment or endian issue... can you confirm whether it works or not on a x86 system?
What OpenWrt platform?

It's on a TPLink TN-WDR3600, which is ar71xx

I don't actually have a x86 system here at the moment other than a Macbook Pro.

Macbook Pro would work for a test...

OK, just got Homebrew/BFGMiner 3.5.1 installed. Miner is mining OK on the Mac.  It still doesn't work on OpenWRT.

[Zich]

Hi luke, i am trying to run bfgminer 3.4.0 or 3.5.1 with nanofury on openwrt ar71xx(TL-MR3020) with no luck. Any idea what i miss?
Thanks.

Code:

root@OpenWrt:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 1a40:0101 TERMINUS TECHNOLOGY INC. USB-2.0 4-Port HUB
Bus 001 Device 003: ID 1a40:0101 TERMINUS TECHNOLOGY INC. USB-2.0 4-Port HUB
Bus 001 Device 005: ID 125f:102f A-DATA Technology Co., Ltd.
Bus 001 Device 007: ID 04d8:00de Microchip Technology, Inc.

[Luke-Jr]

Hi luke, i am trying to run bfgminer 3.4.0 or 3.5.1 with nanofury on openwrt ar71xx(TL-MR3020) with no luck. Any idea what i miss?

What problems are you having?

[Zich]

What problems are you having?

It seem bfgminer not found the nanofury.

Code:

 bfgminer version 3.4.0 - Started: [2013-11-10 10:31:27] - [  0 days 00:00:18]
 [M]anage devices [P]ool management [S]ettings [D]isplay options  [H]elp [Q]uit
 Connected to stratum.btcguild.com diff 2 with stratum as user xxxx
 Block: ...a43d4b31 #268768  Diff:511M ( 3.66Ph/s)  Started: [10:31:27]
 ST:2  F:0  NB:1  AS:0  BW:[144/ 91 B/s]  E:0.00  I: 0.00 BTC/hr  BS:0
 0            |   0.0/  0.0/  0.0 h/s | A:0 R:0+0(none) HW:0/none
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
 [2013-11-10 10:30:56] Waiting for devices; press 'M+' to add, or 'Q' to quit
 [2013-11-10 10:30:56] Need to specify at least one pool server.
 [2013-11-10 10:31:26] Pool 0 http://stratum.btcguild.com:3333 alive
 [2013-11-10 10:31:26] Probing for an alive pool
 [2013-11-10 10:31:26] Pool 0 http://stratum.btcguild.com:3333 alive
 [2013-11-10 10:31:27] Network difficulty changed to 511M ( 3.66Ph/s)
 [2013-11-10 10:31:33] Stratum from pool 0 requested work update
 [2013-11-10 10:31:33] Pool 0 is hiding block contents from us

[Luke-Jr]

What problems are you having?

It seem bfgminer not found the nanofury.

Please paste output from

Code:

bfgminer -D -d?