candoo
|
|
May 14, 2013, 04:24:40 PM |
|
Hello, bfgminer 3.0.2 crashes on me always after one to two days off. (Win7, 64bit, 2 x 7870) Error Report: Problemsignatur: Problemereignisname: APPCRASH Anwendungsname: bfgminer.exe Anwendungsversion: 0.0.0.0 Anwendungszeitstempel: 517cb77a Fehlermodulname: StackHash_cfbb Fehlermodulversion: 6.1.7601.17725 Fehlermodulzeitstempel: 4ec4aa8e Ausnahmecode: c0000374 Ausnahmeoffset: 00000000000c40f2 Betriebsystemversion: 6.1.7601.2.1.0.256.1 Gebietsschema-ID: 1031 Zusatzinformation 1: cfbb Zusatzinformation 2: cfbb4306bffa035bc705edc6ba1129a8 Zusatzinformation 3: c29c Zusatzinformation 4: c29cbd59b59b38c1d7f2b128d9e03ce5
What can I do? Do you have a German support? Did you pay for the software "bfgminer". If you didnt pay anything for the software - how should he pay german speaking staff to help users? Did you donate anything recently? not? No german support - sorry for ya.
|
Einer trage des andern Last, so werdet ihr das Gesetz Christi erfüllen.
|
|
|
nonServiam
|
|
May 14, 2013, 07:51:30 PM |
|
Hello, bfgminer 3.0.2 crashes on me always after one to two days off. (Win7, 64bit, 2 x 7870) Error Report: Problemsignatur: Problemereignisname: APPCRASH Anwendungsname: bfgminer.exe Anwendungsversion: 0.0.0.0 Anwendungszeitstempel: 517cb77a Fehlermodulname: StackHash_cfbb Fehlermodulversion: 6.1.7601.17725 Fehlermodulzeitstempel: 4ec4aa8e Ausnahmecode: c0000374 Ausnahmeoffset: 00000000000c40f2 Betriebsystemversion: 6.1.7601.2.1.0.256.1 Gebietsschema-ID: 1031 Zusatzinformation 1: cfbb Zusatzinformation 2: cfbb4306bffa035bc705edc6ba1129a8 Zusatzinformation 3: c29c Zusatzinformation 4: c29cbd59b59b38c1d7f2b128d9e03ce5
What can I do? Do you have a German support? Did you pay for the software "bfgminer". If you didnt pay anything for the software - how should he pay german speaking staff to help users? Did you donate anything recently? not? No german support - sorry for ya. Candoo ganz ehrlich, Dein Enthusiasmus und Engagement in allen Ehren - mein ich wirklich. Aber den Post hättest Dir sparen können. Mein Englisch is miserabel und es ist nicht verboten zu Fragen ob er jemanden im Team hat der ihn tatkräftig in deutsch unterstützt.
|
|
|
|
glowkeeper
|
|
May 14, 2013, 08:17:38 PM |
|
bfgminer had been running great for a week now, but I just went to check it and my pc had restarted. I suspect our cat stepped on the power button(don't know why hp put it on top).
Now when I try to start bfgminer in the terminal I get this : " error while loading shared libraries: libblkmaker_jansson-0.1.so.0: cannot open shared object file: No such file or directory" What is it? I'm still kind of a linux newbie.
run it from where you compiled the source. So instead of $ bfgminer .... Do this $ cd /path/to/where/it/was/built/ $ ./bfgminer ...
|
|
|
|
dermo
|
|
May 14, 2013, 11:22:54 PM |
|
Hi,
Currently I'm running BFGMINER (diablo kernel) with my 7950 with good result ~630mh/s But I have a possibility to have a 5870 old card gift by a friend It's possible to run 2 separate instance of bfgminer ?
When I'm off (work or sleep) 2 cards run
When I want to play battlefield 3, watching video etc... I turn off the 7950 but the 5870 keep going ?
Thanks you in advance
Dermo
|
|
|
|
Luke-Jr (OP)
Legendary
Offline
Activity: 2576
Merit: 1186
|
|
May 15, 2013, 07:03:06 AM |
|
Hi,
Currently I'm running BFGMINER (diablo kernel) with my 7950 with good result ~630mh/s But I have a possibility to have a 5870 old card gift by a friend It's possible to run 2 separate instance of bfgminer ?
When I'm off (work or sleep) 2 cards run
When I want to play battlefield 3, watching video etc... I turn off the 7950 but the 5870 keep going ?
Thanks you in advance
Dermo
Check out the -d option... Or just disable/enable the GPUs in the TUI.
|
|
|
|
wsoei
Newbie
Offline
Activity: 46
Merit: 0
|
|
May 21, 2013, 07:36:51 PM Last edit: May 21, 2013, 10:53:55 PM by wsoei |
|
Good day Luke-Jr,
My Internet goes in and out every so often. Is there a way for the miner to go into standby mode, then continue mining when Internet connection re-establishes, rather than crash? Thanks in advance for any info provided.
Edit: I noticed the miner went into wait mode when the internet went out for a short period. I wonder what's be causing it to crash lately, then.
|
|
|
|
dermo
|
|
May 22, 2013, 05:24:53 PM |
|
Hi,
Currently I'm running BFGMINER (diablo kernel) with my 7950 with good result ~630mh/s But I have a possibility to have a 5870 old card gift by a friend It's possible to run 2 separate instance of bfgminer ?
When I'm off (work or sleep) 2 cards run
When I want to play battlefield 3, watching video etc... I turn off the 7950 but the 5870 keep going ?
Thanks you in advance
Dermo
Check out the -d option... Or just disable/enable the GPUs in the TUI. thanks
|
|
|
|
Searinox
Full Member
Offline
Activity: 147
Merit: 100
Do you like fire? I'm full of it.
|
|
May 23, 2013, 04:42:02 PM Last edit: May 23, 2013, 08:25:21 PM by Searinox |
|
BFGminer running for 2 months without issues. Updated to AMD drivers 13.4 today. Now it's crashing on startup everytime. Using AMD HD6850 and Windows 7 x64 SP1 + all windows updates.
Command line: --gpu-threads 1 --queue 0 --intensity=d --gpu-dyninterval 16 --failover-only
I deleted the precompiled kernel and it's not making a new one. There's nothing written to the console.
Problem Event Name: APPCRASH Application Name: bfgminer.exe Application Version: 0.0.0.0 Application Timestamp: 517cb77a Fault Module Name: bfgminer.exe Fault Module Version: 0.0.0.0 Fault Module Timestamp: 517cb77a Exception Code: c0000005 Exception Offset: 000000000003c9d9 OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Additional Information 1: e68f Additional Information 2: e68fabd2622a99ce852fcf528f13d88e Additional Information 3: bf43 Additional Information 4: bf43415df077bf09da15770f50cc570b
Both 3.0.2 and 2.10.8 crash in the same manner.
EDIT:
Fixed. I am leaving this here for those who end up having my issue.
-Uninstall all ATI software. -Restart. -Create a batch file with the following and run it:
@C: @cd C:\Windows\System32 del SlotMaximizerAg.dll del SlotMaximizerBe.dll del amdocl64.dll del OpenCL.dll del OpenVideo64.dll del OVDecode64.dll @Cd C:\Windows\SysWOW64 del SlotMaximizerAg.dll Del SlotMaximizerBe.dll del amdocl.dll del OpenCL.dll del OpenVideo.dll del OVDecode.dll @rmdir C:\ProgramData\AMD\KDB /S /Q
-Reinstall ATI 13.1 drivers.
|
|
|
|
5120-01-518-6126
Full Member
Offline
Activity: 174
Merit: 100
< My mining rig >
|
|
May 25, 2013, 05:51:24 PM Last edit: May 26, 2013, 01:09:25 AM by 5120-01-518-6126 |
|
Having a problem using bfgminer-3.0.0-win64 with usb hubs.
4 BFL FPGAs tried on Satechi 10-port USB 3.0 hub, Satechi 12-port USB 2.0 hub, and Stratitec 4-port USB 2.0 hub. All hubs are powered.
bfgminer will find and start all four miners, but almost immediately will start throwing HW error "Error: Get temp returned empty string" for all but the first miner found. bfgminer runs normally if I plug the miners into 4 of the PC's 2.0 and 3.0 USB ports.
Suggestions?
[Edit] Just to be more clear -- decided to free up the USB ports on my PC so moved the FPGAs to the 4-port hub and saw the errors when I restarted bfgminer. Tried moving the hub input to different ports on the PC, same result. Tried switching the FPGAs around on the 4-port and it was always the first detected that ran ok with other three miners throwing the error. Thought maybe the hub was bad, so tried the 12-port 2.0 hub (it has 2 independently switched banks of 6 powered ports each) -- same result irrespective of ports connected on the hub or the PC. Next, tried the 10-port 3.0 hub (3 independently switched banks of 3 ports each plus one iphone/ipad charger port) -- same result. Moved the miners back to ports on the PC, no errors.
|
|
|
|
Epoch
Legendary
Offline
Activity: 922
Merit: 1003
|
|
May 25, 2013, 07:21:19 PM |
|
Having a problem using bfgminer-3.0.0-win64 with usb hubs.
4 BFL FPGAs tried on Satechi 10-port USB 3.0 hub, Satechi 12-port USB 2.0 hub, and Stratitec 4-port USB 2.0 hub. All hubs are powered.
bfgminer will find and start all four miners, but almost immediately will start throwing HW error "Error: Get temp returned empty string" for all but the first miner found. bfgminer runs normally if I plug the miners into 4 of the PC's 2.0 and 3.0 USB ports.
Suggestions?
I've actually been experiencing a similar problem (same error message) for the past few days, but with bfgminer 2.9.9. Looking into it now. I've swapped PCs and get the same problem. I'm focusing on the hubs right now, seeing if the problem follows the Single or if it stays with the USB port.
|
|
|
|
kev7112001
|
|
May 28, 2013, 04:58:48 AM |
|
BFGminer 3.0.1-.02 crashing no matter what on 6970
|
MCXNOW MODERATOR
|
|
|
Luke-Jr (OP)
Legendary
Offline
Activity: 2576
Merit: 1186
|
|
May 28, 2013, 05:41:35 AM |
|
BFGminer 3.0.1-.02 crashing no matter what on 6970 But not 3.0.0? More info?
|
|
|
|
Epoch
Legendary
Offline
Activity: 922
Merit: 1003
|
|
May 28, 2013, 03:54:32 PM |
|
Having a problem using bfgminer-3.0.0-win64 with usb hubs. 4 BFL FPGAs tried on Satechi 10-port USB 3.0 hub, Satechi 12-port USB 2.0 hub, and Stratitec 4-port USB 2.0 hub. All hubs are powered.
bfgminer will find and start all four miners, but almost immediately will start throwing HW error "Error: Get temp returned empty string" for all but the first miner found. bfgminer runs normally if I plug the miners into 4 of the PC's 2.0 and 3.0 USB ports. Suggestions?
I've actually been experiencing a similar problem (same error message) for the past few days, but with bfgminer 2.9.9. Looking into it now. I've swapped PCs and get the same problem. I'm focusing on the hubs right now, seeing if the problem follows the Single or if it stays with the USB port. Further to this: I've now also swapped hubs, and I've also swapped Singles from a 2nd cluster, and saw something interesting. The original problem was that BFL14 (always #14) was giving the 'Error: Get temp returned empty string". Not immediately, but once it started (typically after a few minutes or hours) it would not recover until bfgminer was restarted. Now, even with the swapped PC (and OS change from Win7/64 to Win7/32), swapped USB hubs, *and* swapped Singles (I swapped BFL14 for a 'known good' Single from a different cluster), I'm still getting the same error message. The interesting part is that it is being reported on the 'new' BFL14! Since I replaced basically *everything* and the error did not go away, there's not much else I can do with this cluster. I've since reduced it down to 14 Singles and haven't encountered the error since; the Single I removed is mining elsewhere, and it hasn't had a problem either. Perhaps there is an issue with 15+ USB devices? I suspect this is not a common configuration so it probably does not get a lot of testing. For now I have a workaround so I'm not particularly concerned. I'm more concerned about the general instability of bfgminer versions higher than 2.9.9 on my systems. I may as well ask: Does anyone else have a 15+ cluster of Singles running on a single instance of bfgminer? If so, what version are you running and what are your experiences?
|
|
|
|
5120-01-518-6126
Full Member
Offline
Activity: 174
Merit: 100
< My mining rig >
|
|
May 28, 2013, 05:14:31 PM |
|
Having a problem using bfgminer-3.0.0-win64 with usb hubs. ... decided to free up the USB ports on my PC so moved the FPGAs to the 4-port hub and saw the errors when I restarted bfgminer. Tried moving the hub input to different ports on the PC, same result. Tried switching the FPGAs around on the 4-port and it was always the first detected that ran ok with other three miners throwing the error. Thought maybe the hub was bad, so tried the 12-port 2.0 hub (it has 2 independently switched banks of 6 powered ports each) -- same result irrespective of ports connected on the hub or the PC. Next, tried the 10-port 3.0 hub (3 independently switched banks of 3 ports each plus one iphone/ipad charger port) -- same result. Moved the miners back to ports on the PC, no errors.
For now I have a workaround so I'm not particularly concerned. I'm more concerned about the general instability of bfgminer versions higher than 2.9.9 on my systems. I may as well ask: Does anyone else have a 15+ cluster of Singles running on a single instance of bfgminer? If so, what version are you running and what are your experiences?
Like you, for the time being I have a workaround, but will be looking for an alternative ahead of my long-awaited Bitminers. Don't want to buy another PC just to get 4 more built-in USB ports.
|
|
|
|
SilentSonicBoom
|
|
May 30, 2013, 04:28:42 PM |
|
How do I enable BFGminer to see my Jalapeno? I currently am running it on bitminter beta miner but would like to try it on BFGMINER. Thanks!
|
|
|
|
Luke-Jr (OP)
Legendary
Offline
Activity: 2576
Merit: 1186
|
|
May 30, 2013, 04:46:54 PM |
|
How do I enable BFGminer to see my Jalapeno? I currently am running it on bitminter beta miner but would like to try it on BFGMINER. Thanks! It should autodetect... Be sure you're using 3.0.
|
|
|
|
SilentSonicBoom
|
|
May 30, 2013, 04:55:59 PM |
|
How do I enable BFGminer to see my Jalapeno? I currently am running it on bitminter beta miner but would like to try it on BFGMINER. Thanks! It should autodetect... Be sure you're using 3.0. I am using 3.02 . Not auto detected. Do I need a driver somewhere? Or do I need to enter some code at startup to get it to detect it. Jalapeno is currently on COM3 port (USB). It is auto detected in bitminter beta though.
|
|
|
|
SilentSonicBoom
|
|
May 30, 2013, 04:57:00 PM |
|
How do I enable BFGminer to see my Jalapeno? I currently am running it on bitminter beta miner but would like to try it on BFGMINER. Thanks! It should autodetect... Be sure you're using 3.0. I am using 3.02 . Not auto detected. Do I need a driver somewhere? Or do I need to enter some code at startup to get it to detect it. Jalapeno is currently on COM3 port (USB). It is auto detected in bitminter beta though. Also using WIN64 version with windows 7.
|
|
|
|
Luke-Jr (OP)
Legendary
Offline
Activity: 2576
Merit: 1186
|
|
May 30, 2013, 04:59:12 PM |
|
How do I enable BFGminer to see my Jalapeno? I currently am running it on bitminter beta miner but would like to try it on BFGMINER. Thanks! It should autodetect... Be sure you're using 3.0. I am using 3.02 . Not auto detected. Do I need a driver somewhere? Or do I need to enter some code at startup to get it to detect it. Jalapeno is currently on COM3 port (USB). It is auto detected in bitminter beta though. Sounds like you have the driver installed already... Can you run bfgminer -D -T -d? and post the results here?
|
|
|
|
SilentSonicBoom
|
|
May 30, 2013, 05:01:18 PM |
|
How do I enable BFGminer to see my Jalapeno? I currently am running it on bitminter beta miner but would like to try it on BFGMINER. Thanks! It should autodetect... Be sure you're using 3.0. I am using 3.02 . Not auto detected. Do I need a driver somewhere? Or do I need to enter some code at startup to get it to detect it. Jalapeno is currently on COM3 port (USB). It is auto detected in bitminter beta though. Sounds like you have the driver installed already... Can you run bfgminer -D -T -d? and post the results here? Sorry, not right now as I am heading to work soon. Not too familiar with BFGMiner. How do I runbfgminer -D -T -d? Thanks for your help.
|
|
|
|
|