iamnightelf
Newbie
Offline
Activity: 47
Merit: 0
|
|
August 14, 2013, 03:47:50 PM |
|
I installed Bfgminer 3.1.4 and everything was running fine. I was tinkering around trying to build bitcoin-qt from source and changed a few things, now I get a bus error: 10 when I try to run Bfgminer 3.1.4 @ command prompt (terminal) in Mac OS X 10.8.4
How do I fix it? I tried restarting, reinstalling and NOTHING seems to work... I am stuck using Mac Miner for now...
Seems to be an issue with Bfgminer, ran it once on a separate system (10.7 instead of 10. and after shutting it down and restarting it, I get the same bus error and NOTHNG seems to fix it... What gives?
|
|
|
|
Mudbankkeith
|
|
August 14, 2013, 07:32:07 PM |
|
Where is the version of bfgminer for android (not the bfl version)
|
BTc donations welcome:- 13c2KuzWCaWFTXF171Zn1HrKhMYARPKv97
|
|
|
Luke-Jr (OP)
Legendary
Offline
Activity: 2576
Merit: 1186
|
|
August 14, 2013, 09:19:38 PM |
|
Where is the version of bfgminer for android (not the bfl version)
You get to compile it yourself...
|
|
|
|
Mudbankkeith
|
|
August 14, 2013, 09:33:45 PM |
|
Where is the version of bfgminer for android (not the bfl version)
You get to compile it yourself... Could you be bribed.. with BTC?
|
BTc donations welcome:- 13c2KuzWCaWFTXF171Zn1HrKhMYARPKv97
|
|
|
Luke-Jr (OP)
Legendary
Offline
Activity: 2576
Merit: 1186
|
|
August 14, 2013, 09:41:37 PM |
|
Where is the version of bfgminer for android (not the bfl version)
You get to compile it yourself... Could you be bribed.. with BTC? Possibly, but when I looked at it last, it would be numerous hours to figure out how to build Android's bionic library sensibly. On top of that, I haven't the slightest idea how to make an Android package or upload it to Google Play, and I suspect doing so might not be possible with free software. It'd probably be much faster/cheaper to find someone who does regular Android development.
|
|
|
|
OtaconEmmerich
|
|
August 14, 2013, 11:53:35 PM |
|
On top of that, I haven't the slightest idea how to make an Android package or upload it to Google Play, and I suspect doing so might not be possible with free software. It'd probably be much faster/cheaper to find someone who does regular Android development. You don't NEED to upload it to Google play, It's not that hard to download/install an .apk file online. That said Odds are it would be a better idea to get someone with more experience with Android to work on it. I'd pay BTC/Fait for a working Android App that worked with BE/Avalon/BFL/etc and was fairly easy to use. PS: It's not easy getting Linux to work on Android properly...
|
|
|
|
Mapuo
|
|
August 15, 2013, 03:43:26 AM |
|
Yes, its working. And will need to disable BFL in the second instance now Thank you Luke, what I need to disable LS? Thanks
|
|
|
|
Luke-Jr (OP)
Legendary
Offline
Activity: 2576
Merit: 1186
|
|
August 15, 2013, 05:36:12 AM |
|
Yes, its working. And will need to disable BFL in the second instance now Thank you Luke, what I need to disable LS? Thanks Is -S bitforce:noauto really so hard to guess?
|
|
|
|
Mapuo
|
|
August 15, 2013, 06:14:33 AM |
|
I tried this yestarday, but not working bfgminer.exe -o eu-stratum.btcguild.com:3333 -u user -p pass -G -S bitforce:noauto
|
|
|
|
Picaud
Newbie
Offline
Activity: 6
Merit: 0
|
|
August 15, 2013, 11:19:52 AM Last edit: August 15, 2013, 11:47:21 AM by Picaud |
|
If you run BFGMiner with --scrypt, the only .cl file it actually makes use of is scrypt130511.cl, right?
Are diablo, poclbm, phatk and diakgcn only for SHA256?(or at least not for scrypt)
|
|
|
|
Taugeran
|
|
August 15, 2013, 04:04:42 PM |
|
If you run BFGMiner with --scrypt, the only .cl file it actually makes use of is scrypt130511.cl, right?
Are diablo, poclbm, phatk and diakgcn only for SHA256?(or at least not for scrypt)
Correct and correct
|
Bitfury HW & Habañero : 1.625Th/s tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1 Come join Coinbase
|
|
|
ewibit
Legendary
Offline
Activity: 2955
Merit: 1050
|
|
August 19, 2013, 03:17:32 PM |
|
BFGMiner with BFL LS for [F]an control [D]isable [I]dentify [F]an control Or press Enter when done ERR:UNKNOWN COMMAND
|
|
|
|
Luke-Jr (OP)
Legendary
Offline
Activity: 2576
Merit: 1186
|
|
August 19, 2013, 03:51:08 PM |
|
BFGMiner with BFL LS for [F]an control [D]isable [I]dentify [F]an control Or press Enter when done ERR:UNKNOWN COMMAND
It's disabled on current firmwares
|
|
|
|
movellan
|
|
August 19, 2013, 05:46:31 PM |
|
Can 314 be configured to display BE's in multiple columns? TIA.
|
|
|
|
dooglio
Newbie
Offline
Activity: 6
Merit: 0
|
|
August 20, 2013, 07:05:04 AM |
|
Hello,
I run a linux Ubuntu Quantal 64-bit system. I compiled BFGMiner from the git archive. When I try to get the miner to detect my Block Erupter USB, it doesn't report that anything is available. I tried "-S all" and it refuses to detect anything except my CPU.
Here is some diagnostic output:
$ ./bfgminer -D -T -d? -S all [2013-08-20 00:02:25] Timers: Using clock_gettime(CLOCK_MONOTONIC_RAW) [2013-08-20 00:02:25] setrlimit: Increased soft fd limit from 1024 to hard limit of 4096 [2013-08-20 00:02:25] Started bfgminer 3.1.4 [2013-08-20 00:02:25] Loaded configuration file /home/doug/.cgminer/cgminer.conf [2013-08-20 00:02:25] ft232r_scan: Found 05e3:0608 - not a ft232r [2013-08-20 00:02:25] ft232r_scan: Found 045e:0040 - not a ft232r [2013-08-20 00:02:25] ft232r_scan: Found 045e:00db - not a ft232r [2013-08-20 00:02:25] ft232r_scan: Found 1d6b:0002 - not a ft232r [2013-08-20 00:02:25] ft232r_scan: Found 1d6b:0001 - not a ft232r [2013-08-20 00:02:25] ft232r_scan: Found 1d6b:0001 - not a ft232r [2013-08-20 00:02:25] ft232r_scan: Found 1d6b:0001 - not a ft232r [2013-08-20 00:02:25] ft232r_scan: Found 1d6b:0001 - not a ft232r [2013-08-20 00:02:25] ft232r_scan: Found 1d6b:0001 - not a ft232r [2013-08-20 00:02:25] ft232r_scan: Found 05e3:0608 - not a ft232r [2013-08-20 00:02:25] ft232r_scan: Found 10c4:ea60 - not a ft232r [2013-08-20 00:02:25] Not a ZTEX device 05e3:0608 [2013-08-20 00:02:25] Not a ZTEX device 045e:0040 [2013-08-20 00:02:25] Not a ZTEX device 045e:00db [2013-08-20 00:02:25] Not a ZTEX device 1d6b:0002 [2013-08-20 00:02:25] Not a ZTEX device 1d6b:0001 [2013-08-20 00:02:25] Not a ZTEX device 1d6b:0001 [2013-08-20 00:02:25] Not a ZTEX device 1d6b:0001 [2013-08-20 00:02:25] Not a ZTEX device 1d6b:0001 [2013-08-20 00:02:25] Not a ZTEX device 1d6b:0001 [2013-08-20 00:02:25] Not a ZTEX device 05e3:0608 [2013-08-20 00:02:25] Not a ZTEX device 10c4:ea60 [2013-08-20 00:02:25] Devices detected: 0 devices listed
lsusb gives:
Bus 001 Device 059: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Any ideas?
Edit: cgminer detects the device fine and works correctly.
PS: here is the configure output: ------------------------------------------------------------------------ bfgminer 3.1.4 ------------------------------------------------------------------------
Configuration Options Summary:
curses.TUI...........: FOUND: ncurses5 scrypt...............: Disabled
OpenCL...............: Enabled sensors.monitoring.: Enabled ADL.monitoring.....: Enabled Avalon.ASICs.........: Enabled BitForce.devices.....: Enabled Icarus.FPGAs.........: Enabled ModMiner.FPGAs.......: Enabled X6500.FPGAs..........: Enabled ZTEX.FPGAs...........: Enabled libudev.detection....: yes
CPU Mining...........: Disabled
Compilation............: make (or gmake) CPPFLAGS.............: -pthread CFLAGS...............: -g -O2 -I/usr/include/libusb-1.0 -pthread LDFLAGS..............: -pthread -lpthread LDADD................: -lrt -ldl -lcurl -ljansson -lncurses -ltinfo -lm -ludev -lusb-1.0
Installation...........: make install (as root if needed, with 'su' or 'sudo') prefix...............: /usr/local
|
|
|
|
Nemo1024
Legendary
Offline
Activity: 1680
Merit: 1014
|
|
August 20, 2013, 07:54:42 AM |
|
Trying to move from cgminer to bfgminer with 60 BE stick farm. Initial test with 2 sticks does not look promising. CGminer works fine: cgminer version 3.3.4 - Started: [2013-08-20 09:43:02] -------------------------------------------------------------------------------- (5s):551.6M (avg):654.7Mh/s | A:3 R:1 HW:4 WU:9.1/m ST: 2 SS: 0 NB: 2 LW: 139 GF: 0 RF: 0 Connected to us1.bitminter.com diff 16 with stratum as user XXXXXXXXXX Block: 002dd3969ec67f94... Diff:50.8M Started: [09:45:40] Best share: 51 -------------------------------------------------------------------------------- [P]ool management [S]ettings [D]isplay options [Q]uit AMU 0: | 324.2M/334.8Mh/s | A:16 R:0 HW:2 WU: 4.5/m AMU 1: | 334.3M/327.3Mh/s | A: 3 R:0 HW:2 WU: 4.7/m -------------------------------------------------------------------------------- [2013-08-20 09:42:56] Started cgminer 3.3.4 [2013-08-20 09:43:11] Accepted 54bdc722 Diff 3/1 AMU 1 [2013-08-20 09:43:25] Accepted 9e2b797a Diff 1/1 AMU 1 [2013-08-20 09:43:29] Pool 0 difficulty changed to 16 [2013-08-20 09:43:35] Accepted f4091465 Diff 1/1 AMU 1 [2013-08-20 09:45:40] Stratum from pool 0 detected new block [2013-08-20 09:50:07] Accepted 04fd50f1 Diff 51/16 AMU 0
While Bfgminer 3.1.4 (both 32 and 64 Windows builds) don't see the sticks: bfgminer -S opencl:noauto -S all gives: bfgminer version 3.1.4 - Started: [2013-08-20 09:53:51] - [ 0 days 00:00:10] [M]anage devices [P]ool management [S]ettings [D]isplay options [H]elp [Q]uit Connected to us1.bitminter.com diff 16 with stratum as user XXXXXXXXX Block: ...fbecd018 #253160 Diff:50.8M (363.7Th/s) Started: [22:08:53] ST:2 F:0 NB:1 AS:0 BW:[ 46/ 0kB/s] E:0.00 U:0.0/m BS:0 0 │ 0.0/ 0.0/ 0.0 h/s │ A:0 R:0+0(none) HW:0/none ──────────────┼───────────────────────┼──────────────────────────────────────── MMQ 0: │ DEAD / 0.0/ 0.0 h/s │ A:0 R:0+0(none) HW:0/none ──────────────┴───────────────────────┴──────────────────────────────────────── [2013-08-20 09:53:40] Started bfgminer 3.1.4 [2013-08-20 09:53:47] Probing for an alive pool [2013-08-20 09:53:50] Switching pool 0 http://mint.bitminter.com:8332 to stratum+tcp://us1.bitminter.com:3333 [2013-08-20 09:53:51] Network difficulty changed to 50.8M (363.7Th/s) [2013-08-20 09:53:51] Stratum from pool 0 detected new block [2013-08-20 09:53:51] Pool 0 is hiding block contents from us [2013-08-20 09:53:53] MMQ 0a: Error reading (read USER code) [2013-08-20 09:53:53] MMQ 0b failure, exiting [2013-08-20 09:53:53] MMQ 0a failure, exiting [2013-08-20 09:53:55] Stratum from pool 0 requested work update
|
“Dark times lie ahead of us and there will be a time when we must choose between what is easy and what is right.” “We are only as strong as we are united, as weak as we are divided.” “It is important to fight and fight again, and keep fighting, for only then can evil be kept at bay, though never quite eradicated.”
|
|
|
movellan
|
|
August 20, 2013, 08:21:55 AM |
|
Did you install the SiLabs drivers?
|
|
|
|
Nemo1024
Legendary
Offline
Activity: 1680
Merit: 1014
|
|
August 20, 2013, 09:18:30 AM |
|
Um, I installed the USB to UART (WinUSB) drivers, using zadig utility. That's why cgminer is working. Does BFGminer expect a different set of drivers?
|
“Dark times lie ahead of us and there will be a time when we must choose between what is easy and what is right.” “We are only as strong as we are united, as weak as we are divided.” “It is important to fight and fight again, and keep fighting, for only then can evil be kept at bay, though never quite eradicated.”
|
|
|
Luke-Jr (OP)
Legendary
Offline
Activity: 2576
Merit: 1186
|
|
August 20, 2013, 09:38:59 AM |
|
I run a linux Ubuntu Quantal 64-bit system. I compiled BFGMiner from the git archive. When I try to get the miner to detect my Block Erupter USB, it doesn't report that anything is available. I tried "-S all" and it refuses to detect anything except my CPU. First, be sure you have rebooted or replugged the device after running cgminer, if you have run it (it corrupts the driver). If that's not the problem, try the command in README: sudo modprobe cp210x vendor=0x10c4 product=0xea60 Finally, if it still doesn't show up, please post the output from: lsusb -vv ls /dev/ttyUSB* lsmod dmesg
|
|
|
|
movellan
|
|
August 20, 2013, 10:03:17 AM |
|
Um, I installed the USB to UART (WinUSB) drivers, using zadig utility. That's why cgminer is working. Does BFGminer expect a different set of drivers?
Yes. You will have to uninstall the WinUSB drivers, reboot, and install the SiLabs drivers for BFGMiner to work. If you will be running 60 BE units, use the 64-bit version if your machine is set up for it. All your hubs should be sufficiently powered and preferably USB 3.0
|
|
|
|
|