cracker666
Member
Offline
Activity: 79
Merit: 10
|
|
January 07, 2017, 04:54:54 PM |
|
i get the same error with win 10 also could some one post a example bat for suppernova so i know im doing it right would very much appreciate it thanks as you can see im new to this and want to learn thanks
|
|
|
|
ivanpop
Newbie
Offline
Activity: 62
Merit: 0
|
|
January 07, 2017, 05:27:00 PM |
|
Adding "-c 1" fixed the problem for me. I'm getting absolutely the same hashrate as with Claymore 9.3, running 470's and 380's. However, on a 6 card rig it needs 17.5gb of pagefile to run and I can't free that much space on 32gb ssd's. Claymore works fine with 10gb. If I strip down windows 10 to bare bone I could fit a 16gb pagefile, but not more than that.
|
|
|
|
optiminer (OP)
|
|
January 07, 2017, 05:42:16 PM |
|
Adding "-c 1" fixed the problem for me. I'm getting absolutely the same hashrate as with Claymore 9.3, running 470's and 380's. However, on a 6 card rig it needs 17.5gb of pagefile to run and I can't free that much space on 32gb ssd's. Claymore works fine with 10gb. If I strip down windows 10 to bare bone I could fit a 16gb pagefile, but not more than that.
Reduce the intensity by setting "-i 4. This should reduce the required virtual memory. It should not be much slower.
|
|
|
|
batko
|
|
January 07, 2017, 07:11:30 PM |
|
Hashrate for R9 380?
|
Donation: ETH: 0x0c8ce94dd3d1bfd09c0f887559c61d1b551e4b4d
|
|
|
ivanpop
Newbie
Offline
Activity: 62
Merit: 0
|
|
January 07, 2017, 08:18:21 PM |
|
Reduce the intensity by setting "-i 4. This should reduce the required virtual memory. It should not be much slower. Yes, it uses less memory. I see it can be monitored using Claymore's dual miner monitor for Android, but not with the Remote manager. Also, the miner cannot be manipulated through this port, right? It's in read-only mode?
|
|
|
|
shadowhlohavec
Full Member
Offline
Activity: 207
Merit: 100
NoizChain
|
|
January 07, 2017, 08:21:31 PM |
|
not working - program stopped working... everything set properly
|
|
|
|
snk0752
Newbie
Offline
Activity: 39
Merit: 0
|
|
January 07, 2017, 08:38:01 PM |
|
Everything is working properly in linux. Actually, I have about 320-330h/s per r9 nano card with 15.12 fglrx. Optiminer, thank you! Expecting a further performance increase in future releases!)
|
|
|
|
nerdralph
|
|
January 07, 2017, 08:49:32 PM |
|
Version 1.3.0 released!- Further device specific optimizations bringing up to 30% increase in hash rate!
- Fix crahes with optimized kernel under Windows.
Important: Version 1.3.0 needs GPU_FORCE_64BIT_PTR=1
4rd and 3rd GCN generation cards (Nano, RX4*0) currently run slower on windows than linux. Therefore I recommend to use linux with fglrx (Nano) or amdgpu-pro (RX4*0) for those cards!
New speeds (stock card, linux): R9 Nano: 390 S/s R9 290X: 285 S/s RX 480: 260 S/s Nice work. Base on those numbers, it looks like you're the first to get GDS working. But I'm guessing you haven't tweaked caching with SLC/GLC memory access.
|
|
|
|
charles2k
|
|
January 07, 2017, 09:49:20 PM |
|
Version 1.3.0 released! Important: Version 1.3.0 needs GPU_FORCE_64BIT_PTR=1
Claymore recommends GPU_FORCE_64BIT_PTR=0 What is the difference between values 0 and 1?
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
January 07, 2017, 10:02:42 PM |
|
Version 1.3.0 released! Important: Version 1.3.0 needs GPU_FORCE_64BIT_PTR=1
Claymore recommends GPU_FORCE_64BIT_PTR=0 What is the difference between values 0 and 1? http://cryptoyeti.com/ethereum-mining-gpu-cant-allocate-the-dag-in-a-single-chunk/This post explain what does those settings, and as they state putting GPU_FORCE_64BIT_PTR=1 is good to put if you game at the same time as you mine (possible with process priority super low) because it will open your whole GPU memory for 64 bit adressing, if you do only mining, it's better to put it @0 because it could hurt hashing speed otherwise, well have a good read
|
|
|
|
drr0ss
Member
Offline
Activity: 98
Merit: 10
|
|
January 08, 2017, 01:19:18 AM |
|
Version 1.3.0 released! Important: Version 1.3.0 needs GPU_FORCE_64BIT_PTR=1
Claymore recommends GPU_FORCE_64BIT_PTR=0 What is the difference between values 0 and 1? https://community.amd.com/thread/170125
|
|
|
|
mistercashking
Legendary
Offline
Activity: 1044
Merit: 1050
@MRCASHKING
|
|
January 08, 2017, 01:34:14 AM |
|
nice 1.3 works great on linux with my rx 480's I get a higher hashrate than claymores with this miner.
|
|
|
|
johnkill
Newbie
Offline
Activity: 8
Merit: 0
|
|
January 08, 2017, 08:13:12 AM |
|
Great job. Stable for win 8.1 and win10 Better than new Claymore v.10 and v9.3
for stock cards: R9 290 ~300 sol Sapphire Trix ~350 sol
if you find way to control or just show temperature will be amazing.
|
|
|
|
christiano88
Member
Offline
Activity: 161
Merit: 10
|
|
January 08, 2017, 09:47:16 AM |
|
I get 350h/s on avg with a 390 with a max of 375h/s at times, modded bios and oc+uv to 1070/1675/-75mv. Good job!
With claymore I was getting 325 on avg. Also fixed the problem I had a 1-2 pages back, it was the core clock that was too high combined with the uv.
|
|
|
|
jelin1984
Legendary
Offline
Activity: 2408
Merit: 1004
|
|
January 08, 2017, 02:05:32 PM |
|
can i run linux with some method at windows for run these miner??
|
|
|
|
restless
Legendary
Offline
Activity: 1151
Merit: 1001
|
|
January 08, 2017, 04:17:58 PM |
|
anyone to share cmd line examle ?
|
|
|
|
usefree
Sr. Member
Offline
Activity: 390
Merit: 251
Mamihlapinatapai
|
|
January 08, 2017, 04:31:35 PM |
|
anyone to share cmd line examle ?
./optiminer-zcash -s eu1-zcash.flypool.org:3333 -u t1e8ZTH1jYSB68HKvUer9uZGtryP7eh1wXz.videohome --watchdog-timeout 40 --watchdog-cmd /home/usefree/restartminer.sh and /home/usefree/restartminer.sh contain #!/bin/bash kill $(ps aux | grep optiminer | grep fly | awk '{print $2}') cd /home/usefree/soft/mining/optiminer13/OptiminerZcash/optiminer-zcash ./optiminer-zcash -s eu1-zcash.flypool.org:3333 -u t1e8ZTH1jYSB68HKvUer9uZGtryP7eh1wXz.videohome --watchdog-timeout 40 --watchdog-cmd /home/usefree/restartminer.sh With version 1.3.0 and 1.3.1 i get error segmentation fault. ubuntu 14.04 x86_64, fglrx 15.20.3, stock r9 290x. So i moved to Claymore 10. may be usefull link http://usefree.com.ua/mining-zcash-ubuntu-claymore-optiminer/
|
|
|
|
nevermind41
|
|
January 08, 2017, 05:20:40 PM |
|
I tried -c option to determine the platform but I alays get the same error. I tried -c 0 and also 1 2 too. The interesting part of the issue it always says platform ''0'' in error message [2017-01-08 20:19:55.974] [error] OpenCL error: Failed to list devices of platfo rm 0 (CL_DEVICE_NOT_FOUND) [2017-01-08 20:19:55.975] [info] Press any key to exit application.
|
|
|
|
restless
Legendary
Offline
Activity: 1151
Merit: 1001
|
|
January 08, 2017, 05:44:57 PM |
|
Is it possible to use backup server? eg connect to server 1 if connection drops try server 2...
|
|
|
|
zzzzzzzzzz
|
|
January 08, 2017, 06:18:23 PM |
|
You are using an old driver that the dev does not test on. He tests using the latest Crimson fglrx driver, which is 15.302. I had problems initially with v1.3 using fglrx 15.201, but everything runs fine after updating to 15.302. I running Ubuntu 14.04.3.
|
|
|
|
|