ayrton55 (OP)
Newbie
Offline
Activity: 15
Merit: 0
|
|
January 03, 2017, 11:59:56 AM |
|
This is their webpage http://miner.ebang.com.cn/en/index.htmlThese are the specs. Ebit E9 Miner Parameters Ideal hash rate: 6.3TH/S(-2%~+10%) Power consumption ratio on wall:140W/T(-10%~+15%,AC/DC 93%efficiency,25℃ ambient temperature) Rated voltage: 11.8V~13.0V Chip Info.: DW1227 96pcs(14nm LPP process) Power interface: 4*6PIN port Dimensions: 290mm*126mm*155mm Weight: 4.2KG Network connection: Ethernet Operating temperature: -10℃~40℃ Working humidity: 5%RH~95%RH (non condensing)
|
|
|
|
takagari
Legendary
Offline
Activity: 1050
Merit: 1000
|
|
January 03, 2017, 07:16:30 PM |
|
This is their webpage http://miner.ebang.com.cn/en/index.htmlThese are the specs. Ebit E9 Miner Parameters Ideal hash rate: 6.3TH/S(-2%~+10%) Power consumption ratio on wall:140W/T(-10%~+15%,AC/DC 93%efficiency,25℃ ambient temperature) Rated voltage: 11.8V~13.0V Chip Info.: DW1227 96pcs(14nm LPP process) Power interface: 4*6PIN port Dimensions: 290mm*126mm*155mm Weight: 4.2KG Network connection: Ethernet Operating temperature: -10℃~40℃ Working humidity: 5%RH~95%RH (non condensing) Yah, dunno seen a lot of vaporware scams popping up. This has been discussed I believe the power draw over the number of plugs screams fake or fire hazard.
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
January 03, 2017, 11:14:03 PM |
|
Only 205 watts per connector - well within the connector specs, doesn't push them anywhere near as hard as the SP20 (which was NOT known for melting connectors as a widespread thing, unlike a couple of the KNC models that wanted to push 300+ watts through them).
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
takagari
Legendary
Offline
Activity: 1050
Merit: 1000
|
|
January 04, 2017, 01:53:22 AM |
|
Only 205 watts per connector - well within the connector specs, doesn't push them anywhere near as hard as the SP20 (which was NOT known for melting connectors as a widespread thing, unlike a couple of the KNC models that wanted to push 300+ watts through them).
Correct yes I think it was more the rated output of that psu, which if used only for the miner would be fine, but if used to it's max output, wouldn't Either way this has been floating for a while and yet to see a review or post on anyone actually having one??
|
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3822
Merit: 2701
Evil beware: We have waffles!
|
|
January 04, 2017, 04:55:34 PM |
|
Either way this has been floating for a while and yet to see a review or post on anyone actually having one?? Which is why this thread should be in Speculation vs Hardware.... To date this is just vaporware.
|
|
|
|
fanatic26
|
|
January 18, 2017, 07:20:25 PM Last edit: January 18, 2017, 08:00:49 PM by fanatic26 |
|
This is not vaporware as I just set 4 of them up last night. As they have only been officially selling in mainland China the software is in all chinese. All miners are slightly outperforming the stock 6.3t spec, sitting between 6.4 and 6.5t at 715 mhz. There is an option to turn them up to 730 and with that they will hit 6.6-6.7t but I didnt want to deviate from stock settings on the inital test phase. Also, the production version of the hashing boards have 3x6 pin PCIE connectors not 2 per board as stated in the prerelease specs. Edit: Using the unreliable Kill-o-Watt meter im seeing an efficiency of about .15 or so. Going to amp clamp it later and see if I can get slightly more accurate readings.
|
Stop buying industrial miners, running them at home, and then complaining about the noise.
|
|
|
fanatic26
|
|
January 18, 2017, 07:37:18 PM |
|
|
Stop buying industrial miners, running them at home, and then complaining about the noise.
|
|
|
LASERminer
|
|
January 18, 2017, 09:29:36 PM |
|
Edit: Using the unreliable Kill-o-Watt meter im seeing an efficiency of about .15 or so. Going to amp clamp it later and see if I can get slightly more accurate readings.
How much in Watt it takes?
|
|
|
|
wlefever
Legendary
Offline
Activity: 1174
Merit: 1001
|
|
January 18, 2017, 10:04:29 PM |
|
Wesbite says 140W/TH so close to 900 watts
|
|
|
|
zombijs
Member
Offline
Activity: 79
Merit: 10
|
|
January 18, 2017, 10:09:59 PM |
|
Looks pretty good.
|
|
|
|
fanatic26
|
|
January 18, 2017, 11:13:04 PM |
|
Another thing to note about this miner. While they offer a 6 month warranty on the blades and a 1 year warranty on the controller as of right now the warranty is only valid in China. I have confirmed this direct with Ebang. As they are not officially selling outside of China the warranty does not cross the border.
|
Stop buying industrial miners, running them at home, and then complaining about the noise.
|
|
|
fanatic26
|
|
January 18, 2017, 11:13:52 PM |
|
Edit: Using the unreliable Kill-o-Watt meter im seeing an efficiency of about .15 or so. Going to amp clamp it later and see if I can get slightly more accurate readings.
How much in Watt it takes? Kill-o-Watt is reporting about 1010 watts but as many of you know they are not the most accurate of devices.
|
Stop buying industrial miners, running them at home, and then complaining about the noise.
|
|
|
TunerDude007
|
|
January 18, 2017, 11:30:49 PM |
|
How much are these? I don't understand how much it says on their site.
|
|
|
|
traxor
|
|
January 18, 2017, 11:41:19 PM |
|
How much are these? I don't understand how much it says on their site.
$130 USD per Terrahash (6.3) = $819
|
|
|
|
fanatic26
|
|
January 19, 2017, 12:48:23 AM |
|
How much are these? I don't understand how much it says on their site.
$130 USD per Terrahash (6.3) = $819 They sell them together with their own 1500w power supply which is another $80 USD.
|
Stop buying industrial miners, running them at home, and then complaining about the noise.
|
|
|
Rabinovitch
Legendary
Offline
Activity: 2030
Merit: 1076
A humble Siberian miner
|
|
January 19, 2017, 09:12:14 AM |
|
Avalon 741 looks better...
|
|
|
|
zombijs
Member
Offline
Activity: 79
Merit: 10
|
|
January 19, 2017, 05:40:51 PM |
|
good alternative to Bitmain's miners. At least looks reliable.
|
|
|
|
isoneguy
|
|
January 29, 2017, 02:21:56 PM |
|
How is the noise from these compared to the s7/s9?
|
|
|
|
icon73
Member
Offline
Activity: 80
Merit: 11
|
|
January 29, 2017, 03:45:33 PM |
|
In the ultra cynical world of bitcointalk I guess i better post some pictures before people start calling me a liar.
When you bought yours did you need to wire money, or are they willing to take BTC as payment?
|
|
|
|
Burci39
Newbie
Offline
Activity: 4
Merit: 0
|
|
January 29, 2017, 07:28:14 PM |
|
Were you able to have them shipped to US? If so, how much was shipping?
|
|
|
|
|