NotFuzzyWarm
Legendary
Offline
Activity: 3766
Merit: 2677
Evil beware: We have waffles!
|
|
April 13, 2017, 12:03:24 AM Last edit: April 13, 2017, 03:49:22 PM by NotFuzzyWarm |
|
WOW, that is ALOT of Wattage! It does not make sense Hash/Watt... as compared to the S9.
You can have a power efficient miner....or you can have a reliable miner with a real chance at reaching ROI before falling apart. they can make both, they choose not to.. besides, these T9s have no chance to make roi at these prices.. even with zero electricity costs you are 12-14 months away.. thats if the difficulty doesnt go up, which it will.. you are probably realistically looking at 18-22 months roi. only one making money is bitmain. Let me guess: Bet you don't own any miners do ya? Same was said of the s2, s3, s4, et al when they came out. I paid a helluva lot more $$ for them and guess what? All paid for themselves and more to the point, paid for upgrading/expansion. Currently bouncing around 230THs (I'm Fuzzy on Kano), all paid for from farm income... Got a T9 on it's way as we type that will replace a s7 batch-1 I'm finally retiring. Still is running a steady trouble-free 5.3-5.6THs. Checked and see that the s7 batch-1 cost $1,823 + shipping. Despite that it was long ago paid for. Still makes money but I have a power budget to stay under while expanding the farms hash rate... Depending on how ya look at it, yesterdays 4-block run had the farm in just that one day pay for nearly 1/2 the cost of the new T9 coming which cost BTC0.996 inc UPS shipping
|
|
|
|
Dragonizer
|
|
April 13, 2017, 10:15:52 AM |
|
when i see on the site, t9 its more high hashrate than s9 batch 22 and its lower than s9 batch 23 and its more power consumption than s9 and it more power efficiency than s9. i think if i have more money, i will buy t9 because the hashrate is more big than s9 and its lower price than s9. but how long we need to be wait until the payment become verified like many members complain?
How do you know what batch or view batch details ? I have looked at my invoices on Bitmain and can see no reference to batch number ? Cheers
|
|
|
|
Dragonizer
|
|
April 13, 2017, 11:03:26 AM |
|
My T9's just arrived, I really hope these go better than my R4's.
What happened to your R4's; i'm looking for a QUITE but high hashrate miner, S7 and S9 are to loud. Seems there's NOTHING out there !!
|
|
|
|
dunand
|
|
April 13, 2017, 12:48:17 PM |
|
i'm looking for a QUITE but high hashrate miner, S7 and S9 are to loud.
QUIET
|
|
|
|
VentMine
|
|
April 13, 2017, 03:51:56 PM |
|
My T9's just arrived, I really hope these go better than my R4's.
What happened to your R4's; i'm looking for a QUITE but high hashrate miner, S7 and S9 are to loud. Seems there's NOTHING out there !! There is nothing out there that is comparably high hashrate and quiet. Can you think of any sports cars with high power that are quiet? Noise is a trade-off when needing to dissipate a lot of heat. Check out the stick-miner threads if you want high efficiency, quiet miners.
|
1ESSdoVYKm8sNtYMfdkFBajhAe2e6G8keH
|
|
|
usenet
|
|
April 13, 2017, 04:41:24 PM |
|
WOW, that is ALOT of Wattage! It does not make sense Hash/Watt... as compared to the S9.
You can have a power efficient miner....or you can have a reliable miner with a real chance at reaching ROI before falling apart. I did not have such luck. I have 2x T9. One stopped working properly after a few days. After warranty repair is ok. But with S9 I had no problem. But this is a small statistics sample.
|
|
|
|
Katewind
Member
Offline
Activity: 121
Merit: 92
|
|
April 13, 2017, 04:50:53 PM |
|
i'm looking for a QUITE but high hashrate miner, S7 and S9 are to loud.
QUIET Yes, it's quite because somebody doesn't want to buy this project and it's very long to get a profit and ROI. They almost invest money to get GPU Farms to mine ETH and DASH, ZEC... it's more profitable than ASIC Miners.
|
|
|
|
Dragonizer
|
|
April 19, 2017, 06:06:42 PM |
|
I have a few spares from old s7's and cards etc, might try flashing it with S7-LN firmware and see if i can run 2 cards and make something to hold a psu on top.
|
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3766
Merit: 2677
Evil beware: We have waffles!
|
|
April 19, 2017, 06:51:03 PM |
|
I have a few spares from old s7's and cards etc, might try flashing it with S7-LN firmware and see if i can run 2 cards and make something to hold a psu on top.
Considering the s7 family uses a different ASIC chip and CPU I highly doubt the T9 will run and you very well might brick it...
|
|
|
|
Dragonizer
|
|
April 19, 2017, 06:54:30 PM |
|
I have a few spares from old s7's and cards etc, might try flashing it with S7-LN firmware and see if i can run 2 cards and make something to hold a psu on top.
Considering the s7 family uses a different ASIC chip and CPU I highly doubt the T9 will run and you very well might brick it... I was going to try and make a S7-LN from old S7 parts, not the T9.
|
|
|
|
Dragonizer
|
|
April 19, 2017, 06:56:08 PM |
|
I have a few spares from old s7's and cards etc, might try flashing it with S7-LN firmware and see if i can run 2 cards and make something to hold a psu on top.
Considering the s7 family uses a different ASIC chip and CPU I highly doubt the T9 will run and you very well might brick it... I was going to try and make a S7-LN from old S7 parts, not the T9. If the twin output I/O boards were available it would be great.
|
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3766
Merit: 2677
Evil beware: We have waffles!
|
|
April 19, 2017, 06:58:19 PM |
|
Well this is a T9 thread so...
|
|
|
|
rmtodd618
Newbie
Offline
Activity: 24
Merit: 0
|
|
April 22, 2017, 02:41:58 PM |
|
Id rather have the r4.
|
|
|
|
VRobb
|
|
April 25, 2017, 07:39:17 PM |
|
Due to multiple failure of a hash board on my R4B4, I have been offered a 'new' T9 for exchange of the stumbling R4. I'm guessing I'll probably go with it - if I have it warranty repaired again there's no reason to think it won't do the same once again and drop to 1/2 speed after a short time. Not thrilled with the large decrease in efficiency, but fully running less efficiently is better than half running more efficiently, if that makes sense... A big Harrumph either way!
|
I don't believe in superstition because it's bad luck: 13thF1oor6CAwyzyxXPNnRvu3nhhYeqZdc These aren't the Droids you're looking for: S5 & S7 (Sold), R4B2, R4B4 (RIP), 2x S9 obsolete, 2xS15-28, S17-56, S17-70 Pushing a whopping 1/5 PH! Oh The SPEED!!!
|
|
|
philipma1957
Legendary
Online
Activity: 4256
Merit: 8583
'The right to privacy matters'
|
|
April 25, 2017, 09:07:18 PM |
|
Due to multiple failure of a hash board on my R4B4, I have been offered a 'new' T9 for exchange of the stumbling R4. I'm guessing I'll probably go with it - if I have it warranty repaired again there's no reason to think it won't do the same once again and drop to 1/2 speed after a short time. Not thrilled with the large decrease in efficiency, but fully running less efficiently is better than half running more efficiently, if that makes sense... A big Harrumph either way! I run my 1 and ½ r4s and never went for any repairs. the one with 1 dead board has run fine since dec the one with a loud fan has run fine since jan. I will just let them run till they drop. I would go for a t9 but I am making money hand over fist mining Zec with gpus. So I won't expand my 60th of sha 256. I make more money with 6600h of zec and will soon expand to 8000h of zec. If you analyze the issue why this has happened the fault is 20 billion usd worth of BTC is mined sitting in peoples wallet's you don't need to mine anymore just get some one with early mined cheap btc to use thier password to buy your ZEC or your ETH. Think of the guy sitting on 100,000 btc mined at 1usd each. He has 125 million usd in coin He can diversify into ZEC and ETH VERY EASY. As he may not want to convert to fiat. So he slowly buys ZEC and ETH looking to have an eventual ratio of 33% of each coin in terms of fiat. which would be about 41.6 million in fiat or 33,000 BTC 594,286 ZEC 832,000 ETH someone is propping up ZEC and ETH BY PURCHASING the two coins with BTC and fiat. More btc then fiat. So as long as this occurs I won't buy any sha 256 gear. the t9 the s9 or the s4 = no no no avalon 741 = no no no I will only buy sha 356 gear from sidehack as I like his gear. I will continue a slow expansion of gpu mining for the moment.
|
|
|
|
RoadStress
Legendary
Offline
Activity: 1904
Merit: 1007
|
|
April 26, 2017, 09:23:35 PM |
|
Maybe check www.antbleed.com to patch your vulnerable miners.
|
|
|
|
GWhisper
|
|
May 15, 2017, 12:24:46 PM |
|
Any one seen hash rates displayed like below? Miner still appears to be hashing at it's intended rate, the pool shows the same - I'm just concerned as it looks a little odd and none of my other T9's display like this.
|
|
|
|
Micky25
Legendary
Offline
Activity: 974
Merit: 1000
|
|
May 15, 2017, 12:52:31 PM |
|
With the R4s such behavior is a first sign of imminent failure. But maybe its nothing.
|
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3766
Merit: 2677
Evil beware: We have waffles!
|
|
May 16, 2017, 01:17:52 AM |
|
Heh heh... 6 days after I paid for one of the latest T9's the tx just got confirmed this morning and Bitmain acknowledged it, changed order to valid/paid. Question is, any left to be shipped... ?
|
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
|
May 16, 2017, 11:16:02 AM |
|
Heh heh... 6 days after I paid for one of the latest T9's the tx just got confirmed this morning and Bitmain acknowledged it, changed order to valid/paid. Question is, any left to be shipped... ?
Wow,most tx take about 3-6 hrs for me.....Corp BTC miners are gettin greedy,with all the hashrate you'd think maybe 30 mins or less.........
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan
|
|
|
|