G.Geo
Newbie
Offline
Activity: 6
Merit: 0
|
|
June 21, 2018, 07:07:08 PM |
|
ccminerx16r-x16s
Shame those just cause errors and reboots on 6*1080ti rigs something about memory, before ccminer throws a wobbly, and if not manually terminated will crash sys
Tried latest, and then master, same issue.
Works fine when those are deleted from the list.
Leave core below +100 overclock and depending on the cards 75 or 50, i have 3 different brands of 1080ti and whenever i set clock more than 100, they crash.
|
|
|
|
richdmz
Newbie
Offline
Activity: 61
Merit: 0
|
|
June 21, 2018, 07:11:09 PM |
|
ccminerx16r-x16s
Shame those just cause errors and reboots on 6*1080ti rigs something about memory, before ccminer throws a wobbly, and if not manually terminated will crash sys
Tried latest, and then master, same issue.
Works fine when those are deleted from the list.
Leave core below +100 overclock and depending on the cards 75 or 50, i have 3 different brands of 1080ti and whenever i set clock more than 100, they crash. another tip is to bump your computer's virtual memory up, i was having the same issue until I bumped it up
|
|
|
|
mccoy0210
Newbie
Offline
Activity: 8
Merit: 0
|
|
June 22, 2018, 12:19:04 AM |
|
ccminerx16r-x16s
Shame those just cause errors and reboots on 6*1080ti rigs something about memory, before ccminer throws a wobbly, and if not manually terminated will crash sys
Tried latest, and then master, same issue.
Works fine when those are deleted from the list.
Leave core below +100 overclock and depending on the cards 75 or 50, i have 3 different brands of 1080ti and whenever i set clock more than 100, they crash. another tip is to bump your computer's virtual memory up, i was having the same issue until I bumped it up This happening to me too I agree. Try bumping up your virtual memory to 64. I been running it for 24 hours now. So far so good.
|
|
|
|
RivAngE
Full Member
Offline
Activity: 728
Merit: 169
What doesn't kill you, makes you stronger
|
|
June 22, 2018, 08:23:18 AM |
|
I'm not able to visit YouTube from the PC I'm am on at the moment, but I'm pretty sure this video is not official, and isntead is a supposed "leak"? Maybe those spreading these rumors are people who want to buy cheap cards, probably for gaming, or they just want to troll miners who will hurry and sell their cards in low prices. I'll trust Huang (Nvidia's CEO) more than unnamed rumors. The only thing that I can see comming on July is an announcement of the true 1180 specs and its real release date.
|
|
|
|
domora
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 22, 2018, 05:54:52 PM |
|
Any chance to add a comment line or something to the miner's file that we can see where exactly it is coming from? That would help to check if there are newer versions of the miners available! Otherwise it's hard to guess where ccminerx15 or spmod-etc are coming from. Could you also update Raven Miner to version 3.1? https://github.com/RavencoinProject/RavencoinMiner/releasesThanks!
|
|
|
|
Etherion
|
|
June 22, 2018, 07:44:50 PM |
|
Needs some advice.
I am using zergpool with nemosminer with 66 1070's I see that I mainly mine x16r,x16s,Neoscrypt,HSR,Lyra2r2 and Lyra2z when I used Nicehash I almost only mined Lyra2r2 and Neoscrypt.
should I remove the other algorithms(short spikes on xevan, myr-gr, phi,skein,skunk,keccakc,allium,yescryptR16)? As they do kick in now and again but I am not so sure it is worth the interruption when switching.
|
|
|
|
natan069
|
|
June 23, 2018, 09:57:05 PM |
|
"Nist5, and skein algo estimates are changed to mBTC/GH/day instead of mBTC/MH/day. Update miner software accordingly or use API/status parameter to reflect on multiplier" Zergpool
how to update?
wanna know how to update too
|
|
|
|
sundownz
|
|
June 24, 2018, 07:28:49 PM |
|
"Nist5, and skein algo estimates are changed to mBTC/GH/day instead of mBTC/MH/day. Update miner software accordingly or use API/status parameter to reflect on multiplier" Zergpool
how to update?
wanna know how to update too Go into "zergpool.ps1" and add : "skein" {$Divisor *= 1000} If Nist5 has changed as well add it too in the same way.
|
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
June 26, 2018, 01:32:52 AM |
|
"Nist5, and skein algo estimates are changed to mBTC/GH/day instead of mBTC/MH/day. Update miner software accordingly or use API/status parameter to reflect on multiplier" Zergpool
how to update?
wanna know how to update too Go into "zergpool.ps1" and add : "skein" {$Divisor *= 1000} If Nist5 has changed as well add it too in the same way. you don't have to do anything update to v3.2 : uses the divisor now provided by the API (Ahashpool,Blazepool,Blockmasters,HashRefinery,Zergpool,Zpool) Best Regards Nemo
|
NemosMiner-v3.8.1.3
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
June 26, 2018, 01:33:57 AM Last edit: June 26, 2018, 10:14:21 AM by minerx117 |
|
NemosMiner-v3.2Miner updates: update ccminerx16r : https://github.com/nemosminer/ccminer-x16r/releases (forked from https://github.com/sp-hash/suprminer and optimized further) faster x16s: https://github.com/Pigeoncoin-Miner/Pigeoncoin/releasesfaster equihash: add Bminer v9.0 updated: EthashClaymore to v11.8 cuda 9.1 https://github.com/nemosminer/Claymores-Dual-Ethereum/releasesadd recompiled xmrstak cuda 9.1 v2.4.5: cryptonightv7/cryptonightheavy/cryptonightlight https://github.com/nemosminer/xmr-stak/releasesupdated: Alexis78 to v1.2 (add all supported algos recompile hsr,poly,keccakc) https://github.com/nemosminer/ccminerAlexis78/releasesupdate: Tpruvot v2.3 add: ccminerDumax updated: Raven & Ravencoin (x16r) faster hmq1725: https://github.com/nemosminer/ccminerx16r-x16s/releasesupdate ccminer KlausT neoscrypt/yescrypt/yescryptR16 : https://github.com/nemosminer/ccminerKlausT-r11-fix/releasesOptionalMiner updates: add: cryptodredge (works for supported algos but has no API so disabled for now) add: DelosMiner ( https://github.com/nemosminer/NemosMiner/issues/649) add: ccminercool v1.4 (lyra2z) add: spmod (bitcore/phi/skunk/tribus) update: enemyzealot Algo updates: add support: cryptonightv7/cryptonightheavy (nicehash) add support: Allium Zerg/Zpool add support: yescrypt/yescryptR16 (Zerg,Zpool,Blaze,Ahashpool) Pools updates: use the divisor now provided by the API (Ahashpool,Blazepool,Blockmasters,HashRefinery,Zergpool,Zpool) fix MPH not displaying BTC Balance If you have Windows 7, 8, or 8.1, please update PowerShell: https://www.microsoft.com/en-us/download/details.aspx?id=50395CCMiner may need 'MSVCR120.dll' if you don't already have it: https://www.microsoft.com/en-gb/download/details.aspx?id=40784CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it: https://www.microsoft.com/en-us/download/details.aspx?id=48145running multiple cards its recommended to increase Virtual Memory 64gb is optimal Requires Geforce driver newer than 397.44 (398.11 recommended) Made For & Tested with 8x10603gb 6x1070 6x1070ti 6x1080ti (users have reported up to 12cards working have not tested myself) Some miners do not support more that 9cards Best Regards Nemo
|
NemosMiner-v3.8.1.3
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
June 26, 2018, 01:34:58 AM Last edit: June 26, 2018, 01:57:54 AM by minerx117 |
|
Run NemosMiner-v3.2.bat 1. Config tab 2. Set your Wallet address and Username 3. Select your pool/s. (Remove any algos you do not want to mine) 4. "Save Config" 5. Close Run NemosMiner-v3.2.bat 6."Start" note: 2. you only need to change Username if you are using Miningpoolhub
Best Regards Nemo
|
NemosMiner-v3.8.1.3
|
|
|
Raziel666
Newbie
Offline
Activity: 63
Merit: 0
|
|
June 26, 2018, 06:29:49 AM |
|
After today's commits, isn't ccminerCryptonight the same with ccminerTpruvotphi/ccminerTpruvot23?
|
|
|
|
Etherion
|
|
June 26, 2018, 11:10:33 AM |
|
Profit predictions for x16r and x16s.
The X16R hashing algorithm consists of 16 hashing algorithms operating in the chain fashion with the ordering dependent on the last 8 bytes (16 nibbles) of the hash of the previous block.
I have two suggestions. At this stage, the combination of x16r and x16s is just too much to use an average over time for the 16r and x16s. the variance on profit is huge making switching unreliable.
As the last block determines the next sequence it should be theoretically possible for NEMOSMINER to monitor the miner and get an updated hashrate shortly after a change. Thus recalculate the profitability.
The problem is if minerx16 is not running. Then NEMOSMINER will not be sure what the new profitability will be except if it runs the miner again. Which would not be beneficial given the frequency of the changes in blocks. Another method would be to benchmark each of the 16 algorithms then it should theoretically be possible for NEMOSMINER predict what the new hash rates would be for that combination of algorithms. This might have a lower error than averaging.
|
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
June 26, 2018, 09:19:29 PM |
|
Profit predictions for x16r and x16s.
The X16R hashing algorithm consists of 16 hashing algorithms operating in the chain fashion with the ordering dependent on the last 8 bytes (16 nibbles) of the hash of the previous block.
I have two suggestions. At this stage, the combination of x16r and x16s is just too much to use an average over time for the 16r and x16s. the variance on profit is huge making switching unreliable.
As the last block determines the next sequence it should be theoretically possible for NEMOSMINER to monitor the miner and get an updated hashrate shortly after a change. Thus recalculate the profitability.
The problem is if minerx16 is not running. Then NEMOSMINER will not be sure what the new profitability will be except if it runs the miner again. Which would not be beneficial given the frequency of the changes in blocks. Another method would be to benchmark each of the 16 algorithms then it should theoretically be possible for NEMOSMINER predict what the new hash rates would be for that combination of algorithms. This might have a lower error than averaging.
only x16r has that problem for benchmarks not x16s... if you are un happy with your x16r benchmark go into "Stats" folder delete ccminerx16r_X16R_HashRate.txt then re run.. or you can edit ccminerx16r_X16R_HashRate.txt and change hashrate to what ever you feel is correct. Best Regards Nemo
|
NemosMiner-v3.8.1.3
|
|
|
natan069
|
|
June 26, 2018, 10:03:14 PM |
|
Bminer is reporting hashrate wrong for profit calculations in new 3.2 version
how to correct?
|
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
June 26, 2018, 11:09:45 PM |
|
Bminer is reporting hashrate wrong for profit calculations in new 3.2 version
how to correct?
no its not... Bminer has been well tested in v3.2 its reporting correct hashrate
|
NemosMiner-v3.8.1.3
|
|
|
MikeVR
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 26, 2018, 11:29:15 PM |
|
Bminer is reporting hashrate wrong for profit calculations in new 3.2 version
how to correct?
no its not... Bminer has been well tested in v3.2 its reporting correct hashrate Bminer doesn't work at all with equihash + zpool. Because Bminer can't start - you use aditional param ",c=BTC" in password for zpool*.ps1. Comma make error - Bminer nor supports it . Temporary solution - to use RFC 1738 (code for comma) in zpool*.ps1 Bminer works, but zpool not shows "c=BTC" in "Extra" colum unfortunetly.
|
|
|
|
Quake4
Member
Offline
Activity: 825
Merit: 18
MindMiner developer
|
|
June 27, 2018, 10:44:55 AM |
|
Bminer is reporting hashrate wrong for profit calculations in new 3.2 version
how to correct?
no its not... Bminer has been well tested in v3.2 its reporting correct hashrate I have same problem. Speed must be 453.4 H/s
|
MindMiner - miner manager programm with autoswitch between Algos&Pools. This isnt a fork based on MultiPoolMiner (Nemos, SniffDog, Mega, NPlus & etc)
|
|
|
tunth
|
|
June 27, 2018, 12:12:49 PM |
|
Bminer is reporting hashrate wrong for profit calculations in new 3.2 version
how to correct?
no its not... Bminer has been well tested in v3.2 its reporting correct hashrate I have same problem. Speed must be 453.4 H/s Hi, i have this kind of problem too at miningpoolhub with algo lyra2v2, i m earning 2000$ with 2 1070 gpus, same for using equihash algo. And miningpoolhub is not showing me my dayli earnings and show me 0 balance.
|
|
|
|
tunth
|
|
June 27, 2018, 12:30:27 PM |
|
1BTC = 6088.8 USD +++++ miningpoolhub Balance= 0 0% Trust Level 100% Avg based on [ 01 days 01:01 ] Average BTC/H BTC = 0,00000000 | mBTC = 0,000 Average BTC/D BTC = 0,00000000 | mBTC = 0,000 Estimated Pay Date Unknown > 0,01 BTC +++++ Type: NVIDIA Miner Algorithm Speed mBTC/Day BTC/Day USD/Day BTC/GH/Day Pool ----- --------- ----- -------- ------- ------- ---------- ---- ccminerAlexis78 Lyra2RE2 128,72 GH/s 443,462 0,44346 2.700,149 0,00345 blazepool- EthashClaymore Ethash 55,63 MH/s 0,306 0,00031 1,862 0,00550 miningpoolhub-Ethereum ccminerTpruvot225 Lyra2z 3,55 MH/s 0,265 0,00027 1,615 0,07475 blazepool- ccminerSphash Skein 980,53 MH/s 0,223 0,00022 1,359 0,00023 blazepool- ccminerAlexis78 Keccak 1,51 GH/s 0,220 0,00022 1,339 0,00015 blazepool- ccminerAlexis78 Skein 947,78 MH/s 0,216 0,00022 1,314 0,00023 blazepool- ccminerKlausT NeoScrypt 1,95 MH/s 0,204 0,00020 1,244 0,10498 blazepool- Running: Speed Started Active Cnt Command ----- ------- ------ --- ------- 0,00 PH/s 00:00:04 00:00:05 2 Bin\NVIDIA-Alexis78\ccminer.exe -b 4068 -R 1 -a lyra2v2 -o stratum+tcp ://lyra2v2.mine.blazepool.com:4533 -u xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Bf -p ID=xxxxxxx -i 19,22 -d 0,1 -N 1
As you see above it happens at blazepool too.
|
|
|
|
|