[Work in progess] Burnins Avalon Chip to mining board service

[mutex]

As for 70% trade-ins i don't think i can offer them this time.
My margin for generosity is therefore slim. (But i will crunch the numbers again to see if it i can do it)

I, personally, don't mind trade-in at 50%.

You can bet the demand for 40-45 GHps boards at 400-500EUR will be huge considering the recent BTC appreciation. So I'm pretty sure you will end up using all the leftover components (at least those that can be re-used in the bitfury design). Heck, you've already got an order for 1 THps in a few hours since your announcement. I'm now more worried if I'll get into the first batch than getting additional 20% trade-in discount

[anddy78]

As for 70% trade-ins i don't think i can offer them this time.
My margin for generosity is therefore slim. (But i will crunch the numbers again to see if it i can do it)

I, personally, don't mind trade-in at 50%.

You can bet the demand for 40-45 GHps boards at 400-500EUR will be huge considering the recent BTC appreciation. So I'm pretty you will end up using all the leftover components (at least those that can be re-used in the bitfury design). Heck, you've already got an order for 1 THps in a few hours since your announcement. I'm now more worried if I'll get into the first batch than getting additional 20% trade-in discount

I'm in for a 50% trade-in

[tarmi]

Burnin,
How much is 1TH/s machine? How long it takes to deliver? How do I pay? Do you have a website?
Thanks.

http://www.burninmining.com/

[flyG]

The sale is planned to start either late today or tomorrow.
I will buy the chips and assemble them as fast as i can, it will take a minimum! of 2 weeks.

Aren't 55nm bitfury chips out-of-stock?

cf. http://www.bitfurystrikesback.com/product/bitfury-55nm-asic-chips/

[iikun]

Burnin,
How much is 1TH/s machine? How long it takes to deliver? How do I pay? Do you have a website?
Thanks.

no need to flood this thread with questions which have been answered already, on the same page & just a couple of posts up no less. His website is in the OP no less.

[shade88]

The Bitburner Fury is great, I've purchased 12 of it from cryptx batch. Runs at 45GH/s using about 70 watt without overclock without any hiccup for weeks. You can push it to 50GH/s.

1 of 12 boards broke down after 3 days but I've finally got it replace by cryptx and sent the broken one to burnin for check up.

[mtbitcoin]

The sale is planned to start either late today or tomorrow.
I will buy the chips and assemble them as fast as i can, it will take a minimum! of 2 weeks.

Hi Burnin:

Personally, the only request I have is that you consider giving your ex-customers who placed orders for your mining board service priority when placing orders for the new boards, seeing that most of us have been burnt (which is NOT your fault) in one way or the other. This would at least help ease some of the pain

Thanks

Cheers

[Sophokles]

The sale is planned to start either late today or tomorrow.
I will buy the chips and assemble them as fast as i can, it will take a minimum! of 2 weeks.

Hi Burnin:

Personally, the only request I have is that you consider giving your ex-customers who placed orders for your mining board service priority when placing orders for the new boards, seeing that most of us have been burnt (which is NOT your fault) in one way or the other. This would at least help ease some of the pain

Thanks

Cheers

+1

[Tornate]

The sale is planned to start either late today or tomorrow.
I will buy the chips and assemble them as fast as i can, it will take a minimum! of 2 weeks.

Hi Burnin:

Personally, the only request I have is that you consider giving your ex-customers who placed orders for your mining board service priority when placing orders for the new boards, seeing that most of us have been burnt (which is NOT your fault) in one way or the other. This would at least help ease some of the pain

Thanks

Cheers

Bullshit. You're saying "which is NOT your fault" and at the same time asking to give you a priority to compensate the fault. Why should he compensate not his own fault?
I ordered his services too by the way, but your idea is ignorant and selfish.

[BenTuras]

Burnin should just announce opening of the new Bitfury sales via his newsletter. Then within minutes someone will post it here too.

[bobsag3]

The sale is planned to start either late today or tomorrow.
I will buy the chips and assemble them as fast as i can, it will take a minimum! of 2 weeks.

Aren't 55nm bitfury chips out-of-stock?

cf. http://www.bitfurystrikesback.com/product/bitfury-55nm-asic-chips/

Also OOS on mbp

[burnin]

The sale is planned to start either late today or tomorrow.
I will buy the chips and assemble them as fast as i can, it will take a minimum! of 2 weeks.

Aren't 55nm bitfury chips out-of-stock?

cf. http://www.bitfurystrikesback.com/product/bitfury-55nm-asic-chips/

Also OOS on mbp

And that's exactly what stopped me in my tracks.
They went out of stock right at the time i had everything sorted out and wanted to order them.
I had to talk to my suppliers first to ensure the planned timing could be matched.

But i am in contact with Dave and Punin so might be able to get a reel.

[iikun]

The sale is planned to start either late today or tomorrow.
I will buy the chips and assemble them as fast as i can, it will take a minimum! of 2 weeks.

Aren't 55nm bitfury chips out-of-stock?

cf. http://www.bitfurystrikesback.com/product/bitfury-55nm-asic-chips/

Also OOS on mbp

And that's exactly what stopped me in my tracks.
They went out of stock right at the time i had everything sorted out and wanted to order them.
I had to talk to my suppliers first to ensure the planned timing could be matched.

But i am in contact with Dave and Punin so might be able to get a reel.

damn, that sucks... Just one of those things though I guess.
Even if Burnin IS able to obtain a reel it seems time is running out for it to be profitable both for him as well as customers.

[madmax_ger]

The sale is planned to start either late today or tomorrow.
I will buy the chips and assemble them as fast as i can, it will take a minimum! of 2 weeks.

Aren't 55nm bitfury chips out-of-stock?

cf. http://www.bitfurystrikesback.com/product/bitfury-55nm-asic-chips/

Also OOS on mbp

And that's exactly what stopped me in my tracks.
They went out of stock right at the time i had everything sorted out and wanted to order them.
I had to talk to my suppliers first to ensure the planned timing could be matched.

But i am in contact with Dave and Punin so might be able to get a reel.

damn, that sucks... Just one of those things though I guess.
Even if Burnin IS able to obtain a reel it seems time is running out for it to be profitable both for him as well as customers.

This. Nearly 2 weeks have passed already.

[pazor]

The sale is planned to start either late today or tomorrow.
I will buy the chips and assemble them as fast as i can, it will take a minimum! of 2 weeks.

Aren't 55nm bitfury chips out-of-stock?

cf. http://www.bitfurystrikesback.com/product/bitfury-55nm-asic-chips/

Also OOS on mbp

And that's exactly what stopped me in my tracks.
They went out of stock right at the time i had everything sorted out and wanted to order them.
I had to talk to my suppliers first to ensure the planned timing could be matched.

But i am in contact with Dave and Punin so might be able to get a reel.

when we can expect a prognosis ?

[fiktionist]

Hi,

you are receiving this mail because you marked your order to be refunded.
I want to start the refunds now and for that i need your SEPA details so
can i send you your money.
In the case you already sent me the details please ignore this mail.

Please reply to this mail with the following lines filled out:

Name:
IBAN:
BIC/SWIFT:
Order Number(s):


cheers
Martin (Burnin)

FYI

[eneloop]

The sale is planned to start either late today or tomorrow.
I will buy the chips and assemble them as fast as i can, it will take a minimum! of 2 weeks.

Aren't 55nm bitfury chips out-of-stock?

cf. http://www.bitfurystrikesback.com/product/bitfury-55nm-asic-chips/

Also OOS on mbp

And that's exactly what stopped me in my tracks.
They went out of stock right at the time i had everything sorted out and wanted to order them.
I had to talk to my suppliers first to ensure the planned timing could be matched.

But i am in contact with Dave and Punin so might be able to get a reel.

damn, that sucks... Just one of those things though I guess.
Even if Burnin IS able to obtain a reel it seems time is running out for it to be profitable both for him as well as customers.

This. Nearly 2 weeks have passed already.

Not sure if it's that time dependent. The price of the bitfury ASIC is dependending on the (expected) difficulty. So it will be cheaper in future but the good efficiency (also in comparison to 28nm ones) of the chip and burnins good design is still the same.

[burnin]

Haven't received any news from them so i guess that's it for the bitfury's this year.

What am i doing now:

• Refunds
• tie up loose ends
• work on new designs
• recovering from the stress of the last months

BTC refunds are mostly done now.
Paypal refund round #2 is coming up. (Can't do them myself, have to contact their support to get them done)
SEPA refunds are also on their way.
My goal is to get most of the refunds done this month.

[FlappySocks]

Thanks for keeping us up to date Burnin.  Much appreciated. 

[RoadStress]

Haven't received any news from them so i guess that's it for the bitfury's this year.

What am i doing now:

• Refunds
• tie up loose ends
• work on new designs
• recovering from the stress of the last months

BTC refunds are mostly done now.
Paypal refund round #2 is coming up. (Can't do them myself, have to contact their support to get them done)
SEPA refunds are also on their way.
My goal is to get most of the refunds done this month.

Care to share your new designs?