TFZ02
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 09, 2017, 08:41:30 AM |
|
is there an big different between the rx570 4gb and the rx570 8gb?
|
|
|
|
Mattthev
|
|
June 09, 2017, 10:42:54 AM |
|
Right now im mining with 3x xfx rx 570 4gb and a powercolor rx 570. But when i tried adding a 580 8gb. System reads all 5 cards but only 2 are working. Tried gen1 lane. Tried rearranging the cards. My mobo is asrock b250 fatality gaming k4. Can any one help me here?
Try reinstall drivers. is there an big different between the rx570 4gb and the rx570 8gb?
No. I get 29 MH/s per card but does anyone achieved 30MH/s?
I do. 31MH/s unstable, 30+ stable with RX 470 Strix - Samsung.
|
|
|
|
chohav
|
|
June 09, 2017, 10:44:15 AM |
|
any one can help me in this i have very high GPU power drew my GPU it's sapphire rx570 pulse itx What are you mining? Is the card bios modded? If so, lower your core clock to 1100 and increase memory to 1900+. If not, you can't have much better results with the power draw. Also AB is not accurate for power consumption, buy a watt meter to see how much you draw from the wall.
|
|
|
|
mpdanbo
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 09, 2017, 07:17:49 PM |
|
How did you get that wattage graph on Afterburner? It isn't there by default and I looked in all the options!
|
|
|
|
Jmack23
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 09, 2017, 09:32:13 PM |
|
Right now im mining with 3x xfx rx 570 4gb and a powercolor rx 570. But when i tried adding a 580 8gb. System reads all 5 cards but only 2 are working. Tried gen1 lane. Tried rearranging the cards. My mobo is asrock b250 fatality gaming k4. Can any one help me here? What os are you running? Do you have GPT formatting on the OS drive? Do you have 4g bonding enabled?
|
|
|
|
ozzy1926
|
|
June 10, 2017, 02:25:42 AM Last edit: June 10, 2017, 03:11:54 AM by ozzy1926 |
|
Which is better 4gb pulse or 4gb nitro or pulse itx?And more important which one is more quiet?
|
|
|
|
voodoochili
Newbie
Offline
Activity: 4
Merit: 0
|
|
June 10, 2017, 06:13:35 AM |
|
Has anyone used a Visiontek 570? I just got a hold of them and am about to setup my rig. I'm a bit hesitant to keep them though because hardly anyone talks about Visiontek cards..
I have 2 of these cards, they one gets 22mhs and the other gets 24 with stock settings. They both have elpida memory. I found a modded bios at http://1stminingrig.com/are-the-rx570-and-rx580-profitable-mining-performance-review/ a member named dragoon posted a modded bios, increased my hashrate to 26 and 27mhs for eth. Anorak.tech has some visiontek roms as well.
|
|
|
|
Mattthev
|
|
June 10, 2017, 06:27:51 AM |
|
Has anyone used a Visiontek 570? I just got a hold of them and am about to setup my rig. I'm a bit hesitant to keep them though because hardly anyone talks about Visiontek cards..
I have 2 of these cards, they one gets 22mhs and the other gets 24 with stock settings. They both have elpida memory. I found a modded bios at http://1stminingrig.com/are-the-rx570-and-rx580-profitable-mining-performance-review/ a member named dragoon posted a modded bios, increased my hashrate to 26 and 27mhs for eth. Anorak.tech has some visiontek roms as well. Isn't this just reference card?? It's made by AMD!! Reference cards are all same.
|
|
|
|
voodoochili
Newbie
Offline
Activity: 4
Merit: 0
|
|
June 10, 2017, 07:28:30 AM |
|
They look like reference cards, with the blower fan. Visiontek calls them overclock editions
|
|
|
|
akirasendo7
Newbie
Offline
Activity: 58
Merit: 0
|
|
June 10, 2017, 09:16:30 AM |
|
can someone give me the moded bios for each card im afraid to mod it myself i might destroy the card thanks for sharing everyone appreciate it in advance 4gb pulse or 4g sapphire thanks
|
|
|
|
matix2711
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 10, 2017, 09:47:31 AM |
|
Hello I use rx570 asus strix gaming 4GB timing 1500=>2000 GPU 1300=>1112 Memory 1750=>1875 and i still GPU memory errors, when memory go 1900 so much errors. how can i fix it? Elpida memory type https://zapodaj.net/images/3bc99982b6678.jpg
|
|
|
|
zot57
Newbie
Offline
Activity: 165
Merit: 0
|
|
June 10, 2017, 01:29:13 PM |
|
Insufficient power--> Have dual Evga 850 G2 on add2psu. So power should be enough.
Why two Evga's 850 for only 6 GPU's ? people use two 750W for 8 GPU's.
|
|
|
|
noreither
Newbie
Offline
Activity: 16
Merit: 0
|
|
June 10, 2017, 01:47:58 PM Last edit: June 10, 2017, 02:33:26 PM by noreither |
|
I bought a bunch of MSI armor 4gb OC.
Using a power save bios, I'm able to achieve between 25 to 27mh/card using 100w/card But.. for no reason, even if I set the clock engine to 1075, when launching claymore, it shows 1068-1075 then drops to 813 to 830mhz. I even tried using the -cclock 1075 in the batch file but no success so far, anyone experiencing this? It results in a card doing 21.3 to 21.7mh/sec.. Hynix memory... I'm confused.
Thank you!!
|
|
|
|
modzer0
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 10, 2017, 02:45:20 PM |
|
I bought a bunch of MSI armor 4gb OC.
Using a power save bios, I'm able to achieve between 25 to 27mh/card using 100w/card But.. for no reason, even if I set the clock engine to 1075, when launching claymore, it shows 1068-1075 then drops to 813 to 830mhz. I even tried using the -cclock 1075 in the batch file but no success so far, anyone experiencing this? It results in a card doing 21.3 to 21.7mh/sec.. Hynix memory... I'm confused.
Thank you!!
I also have a couple MSI RX 570 Armor OC 4GB cards. Is the power save BIOS you're referring to from Anorak? I tried that one as well and was only getting 20-21 MH/s. Anorak's memshift BIOS got me in the 24 area. I modified the power save BIOS to increase memory to 1975 and upped the max power limit to 115 watts, and now I'm getting 26-27 MH/s but the power draw is ~125 watts per card at the wall. I'm fairly new to this, but I feel the driver is probably throttling back the clock to stay under the 100 watt power limit in Anorak's power save BIOS. Increasing the power limit keeps it from throttling, but of course then draws more power. Someone on Anorak's forum reported 25-27 MH/s at 95-100 watts with the power save BIOS, but I don't know how. My cards can't seem to achieve that without using more power.
|
|
|
|
vince212
|
|
June 10, 2017, 03:17:24 PM |
|
Right now im mining with 3x xfx rx 570 4gb and a powercolor rx 570. But when i tried adding a 580 8gb. System reads all 5 cards but only 2 are working. Tried gen1 lane. Tried rearranging the cards. My mobo is asrock b250 fatality gaming k4. Can any one help me here? What os are you running? Do you have GPT formatting on the OS drive? Do you have 4g bonding enabled? Im using win10 Dont have any idea about the gpt formatting 4g bonding nope cant see it in my bios
|
|
|
|
CjMapope
Legendary
Offline
Activity: 1820
Merit: 1092
~Full-Time Minter since 2016~
|
|
June 10, 2017, 03:21:30 PM |
|
I bought a bunch of MSI armor 4gb OC.
Using a power save bios, I'm able to achieve between 25 to 27mh/card using 100w/card But.. for no reason, even if I set the clock engine to 1075, when launching claymore, it shows 1068-1075 then drops to 813 to 830mhz. I even tried using the -cclock 1075 in the batch file but no success so far, anyone experiencing this? It results in a card doing 21.3 to 21.7mh/sec.. Hynix memory... I'm confused.
Thank you!!
I also have a couple MSI RX 570 Armor OC 4GB cards. Is the power save BIOS you're referring to from Anorak? I tried that one as well and was only getting 20-21 MH/s. Anorak's memshift BIOS got me in the 24 area. I modified the power save BIOS to increase memory to 1975 and upped the max power limit to 115 watts, and now I'm getting 26-27 MH/s but the power draw is ~125 watts per card at the wall. I'm fairly new to this, but I feel the driver is probably throttling back the clock to stay under the 100 watt power limit in Anorak's power save BIOS. Increasing the power limit keeps it from throttling, but of course then draws more power. Someone on Anorak's forum reported 25-27 MH/s at 95-100 watts with the power save BIOS, but I don't know how. My cards can't seem to achieve that without using more power. its just the luck of the ASIC quality most likely and yes i agree, it sounds like his clocks are just throlling due to the power limit these 570 armor are tricky man i also have one, only bought one thank god haha I actually used the OC version Anorak had up before (its removed now as it has a "show 0 in AB" bug that causes unstability, but it works (for now), 30mh/s at 100 watts 1150/2100 You can check to see if your problem is power throttling by just increasing the power on afterburner a bit and see if the clock pulls stable (or downclock for max hash at that power level too of course is option) Good Luck!
|
~Got this girl in my bed, a roof over my head, i mint a couple coins a week, and thats how i make bread~ ~On the 12th day of Hatzvah, OGminer said to me: "compute root of the merkle hash tree!"~ Prohashing -- Simply the best Multipool!
|
|
|
noreither
Newbie
Offline
Activity: 16
Merit: 0
|
|
June 10, 2017, 05:08:26 PM |
|
I bought a bunch of MSI armor 4gb OC.
Using a power save bios, I'm able to achieve between 25 to 27mh/card using 100w/card But.. for no reason, even if I set the clock engine to 1075, when launching claymore, it shows 1068-1075 then drops to 813 to 830mhz. I even tried using the -cclock 1075 in the batch file but no success so far, anyone experiencing this? It results in a card doing 21.3 to 21.7mh/sec.. Hynix memory... I'm confused.
Thank you!!
I also have a couple MSI RX 570 Armor OC 4GB cards. Is the power save BIOS you're referring to from Anorak? I tried that one as well and was only getting 20-21 MH/s. Anorak's memshift BIOS got me in the 24 area. I modified the power save BIOS to increase memory to 1975 and upped the max power limit to 115 watts, and now I'm getting 26-27 MH/s but the power draw is ~125 watts per card at the wall. I'm fairly new to this, but I feel the driver is probably throttling back the clock to stay under the 100 watt power limit in Anorak's power save BIOS. Increasing the power limit keeps it from throttling, but of course then draws more power. Someone on Anorak's forum reported 25-27 MH/s at 95-100 watts with the power save BIOS, but I don't know how. My cards can't seem to achieve that without using more power. Exactly, the powersave bios from Anorak. CjMapope... THANKS TO BOTH OF YOU! That is exactly the issue, I just tried putting +10% power... went from 20.6-21.6 to 24.3, the second card is running at 26 mh 110watts/card. I'll be off for the day but I will try pimping a little bit, just to reach the best balance between performance and power usage :DD THANKS again!! Edit: I just tried +14... cards now runs at 114watts but getting 25.5 to 26 for first card and 26.4 for second ! I'm Lovin' It
|
|
|
|
Mattthev
|
|
June 10, 2017, 05:56:04 PM |
|
Exactly, the powersave bios from Anorak. CjMapope... THANKS TO BOTH OF YOU! That is exactly the issue, I just tried putting +10% power... went from 20.6-21.6 to 24.3, the second card is running at 26 mh 110watts/card. I'll be off for the day but I will try pimping a little bit, just to reach the best balance between performance and power usage :DD THANKS again!! Edit: I just tried +14... cards now runs at 114watts but getting 25.5 to 26 for first card and 26.4 for second ! I'm Lovin' It That's what you get from those bioses download on the internet... My cards had 25MH/s stock Now 29-31MH/s RX 470/480.
|
|
|
|
vince212
|
|
June 11, 2017, 05:05:45 AM |
|
Exactly, the powersave bios from Anorak. CjMapope... THANKS TO BOTH OF YOU! That is exactly the issue, I just tried putting +10% power... went from 20.6-21.6 to 24.3, the second card is running at 26 mh 110watts/card. I'll be off for the day but I will try pimping a little bit, just to reach the best balance between performance and power usage :DD THANKS again!! Edit: I just tried +14... cards now runs at 114watts but getting 25.5 to 26 for first card and 26.4 for second ! I'm Lovin' It That's what you get from those bioses download on the internet... My cards had 25MH/s stock Now 29-31MH/s RX 470/480. can i use a gigabyte gb elpida bios in xfx 4gb elpida bios? basically different just different brand
|
|
|
|
CjMapope
Legendary
Offline
Activity: 1820
Merit: 1092
~Full-Time Minter since 2016~
|
|
June 11, 2017, 05:19:44 AM |
|
Exactly, the powersave bios from Anorak. CjMapope... THANKS TO BOTH OF YOU! That is exactly the issue, I just tried putting +10% power... went from 20.6-21.6 to 24.3, the second card is running at 26 mh 110watts/card. I'll be off for the day but I will try pimping a little bit, just to reach the best balance between performance and power usage :DD THANKS again!! Edit: I just tried +14... cards now runs at 114watts but getting 25.5 to 26 for first card and 26.4 for second ! I'm Lovin' It That's what you get from those bioses download on the internet... My cards had 25MH/s stock Now 29-31MH/s RX 470/480. can i use a gigabyte gb elpida bios in xfx 4gb elpida bios? basically different just different brand it's mainly dependant on the MEMORY type, but the brand has to match tho as well for Anorak's bios's Honestly, you should just grab that 500 series easy editor someone posted it allows you to copy straps SO easy, and editing a bios custom yourself SEEMS daunting, but its really not, just stick to easy stuff, mem straps, TDP. Also, don't fear TRYING one of Anorak's on a different brand, if the "sub-system id" is not an EXACT match ATIWinFlash wont do it anyways (well not by GUI, and don't FORCE it in CMD or you will regret it! lol) and ALWAYS back up the original BIOS's first!
|
~Got this girl in my bed, a roof over my head, i mint a couple coins a week, and thats how i make bread~ ~On the 12th day of Hatzvah, OGminer said to me: "compute root of the merkle hash tree!"~ Prohashing -- Simply the best Multipool!
|
|
|
|