spectune
Newbie
Offline
Activity: 24
Merit: 0
|
|
September 16, 2017, 01:58:09 PM |
|
I get from my Nitro+ 4GB RX570 /Hynix) max 30,5Mh/s out at 120W at the wall. Used the Ubermix 3.1 strap copied from 1650 up. Undervoltage at 860mV both. Clock at 2070mem/1160GPU. That's it.
|
|
|
|
syraka76
Member
Offline
Activity: 83
Merit: 10
|
|
September 22, 2017, 06:24:26 AM |
|
|
|
|
|
SummersideGuy
Sr. Member
Offline
Activity: 518
Merit: 250
I am a meat Popsicle
|
|
September 28, 2017, 10:43:23 AM |
|
Just get the Polaris 1.6 fork and save your Eth https://github.com/jaschaknack/PolarisBiosEditorIt detects your card memory and applies optimal timings for your card, better then just copying straps down from 1500. Also make sure to back up your Rom as always.
|
|
|
|
hardworker27
Newbie
Offline
Activity: 58
Merit: 0
|
|
October 06, 2017, 03:37:48 AM |
|
Hi, this is my case https://imgur.com/a/I1KnI (ethos) I got 6 Rx 570 4gb Sapphire Nitro+. 1 of them is Hynix, the rest are Elpidia. I'm dual mining: ETH + SIA. For SIA I'm getting 469 each. I'm wondering. My last gpu (hynix) is somehow undervolted as you can see. I have no idea how because I forgot the original BIOS file. It is much cooler than the other cards. I'm happy with the hashrate less than 1 from the others. My questions are: is it safe to get it undervolted? If yes, how can I do to the others? Please check my mem and cor also and please let me know if you see something wrong. I would like to say that I'm using 2 table fans to help it get cool. Please advice me methods to keep it cool and downgrade the hashrate if necessary. Thank you very much.
|
|
|
|
akirasendo7
Newbie
Offline
Activity: 58
Merit: 0
|
|
October 09, 2017, 12:20:56 AM |
|
as for 470 570 and 580
470 and 480 produce better hashrate than 570 but it will all rely much on the memory and manufacturer if its sapphire 470 it will take u to 28-29 respectively 570 sapphire not that much as for my own experience 580 will rely much on memory but hynix can be push to 29mhz without shutting down and stable\ for modding you can email me or contact me i can help you,
|
|
|
|
Mattthev
|
|
October 09, 2017, 06:17:52 AM |
|
as for 470 570 and 580
470 and 480 produce better hashrate than 570 but it will all rely much on the memory and manufacturer if its sapphire 470 it will take u to 28-29 respectively 570 sapphire not that much as for my own experience 580 will rely much on memory but hynix can be push to 29mhz without shutting down and stable\ for modding you can email me or contact me i can help you,
What? RX 580 Hynix can do 32MH/s, well not every card, but 30MH/s with almost all of them, I would say Wolf0 can push it even more. RX 470/570 29-30MH/s is almost no problem. Depends on exact Hynix memory type and quality.
|
|
|
|
akirasendo7
Newbie
Offline
Activity: 58
Merit: 0
|
|
October 14, 2017, 04:12:40 AM |
|
as for 470 570 and 580
470 and 480 produce better hashrate than 570 but it will all rely much on the memory and manufacturer if its sapphire 470 it will take u to 28-29 respectively 570 sapphire not that much as for my own experience 580 will rely much on memory but hynix can be push to 29mhz without shutting down and stable\ for modding you can email me or contact me i can help you,
What? RX 580 Hynix can do 32MH/s, well not every card, but 30MH/s with almost all of them, I would say Wolf0 can push it even more. RX 470/570 29-30MH/s is almost no problem. Depends on exact Hynix memory type and quality. Have you not read my statement? it depends, and yes you can push cards but its not recommended you just letting the device burn you dont push equipment to the limits, its already given to much is bad, also electricty will drag you next time ready carefully
|
|
|
|
dragonmike
|
|
October 14, 2017, 09:05:39 AM |
|
I'm not sure what you're trying to say... If you undervolt your GPU you're surely LESS likely to burn it... Then it's just about finding the right mix of lowest timings and highest clocks that will maximise your hashrate... You're only really putting extra strain on your hardware if you give it more juice. I've never seen a GPU fail from undervolting (or pure overclocking for that matter).
|
|
|
|
heavyarms1912
|
|
October 16, 2017, 07:06:34 PM |
|
Hi;
I have 6pcs MSI RX570 4GB GAMING X (Elpida) and mining ETH+DCR. Stock, I got 23.5 and with OC I have 24.5. After trying all kind of possible MODS
1:1500 strap to 1:2000 only 1:1750 strap to 1:2000 only 2:1500 strap to 2:2000 only 2:1750 strap to 2:2000 only 1:1500 strap to 1:2000 and 2:1500 strap to 2:2000 1:1750 strap to 1:2000 and 2:1750 strap to 2:2000
Best result I can get 26.2 stable with 1180 - 1990 OC setting.
Simple Mining OS Asrock BTC + PRO i3 6100 8GB DDR4 2X 750Watt PSU
I see in many forums people go for 1100-2040 however as soon as I get close to 2000 with memory speed cards are not stable anymore nad 2000 and over they stop working. Also tried Sapphire Nitro RX580 8GB and It seems ok with going over 2000 memory clock. Tried 1280-2199 I got 28MHS +750 for DCR
What do you think is the problem is?
Not all cards do above 2000 stable (with 1500 strap mods). I have couple of MSI RX 570 Gaming X that do 1900-1950. Higher than that they give out memory errors. I have an MSI RX 570 armor OC that does 2040. However, the ones that do 1900-1950 also hash at 27.5-28 Mh/s. None of my cards are below 27 Mh/s even at 1900 Mhz memory frequency. Also in my experience 1040/1075 Mhz on core and 1900/1950 Mhz works fine for most of the rx 570 gaming x cards I have. I get very less hash-rate improvements over 1140 MHz while keeping the memory frequencies below 2000 Mhz without increasing the power consumption considerably. So it wasn't worthwhile. This is for solo mining. For dual mining the core frequency helps but also increases the power consumption so have to tweak those too. Right now mine are set at TDP 100 and Max power of 120 with core/mem voltages lowered too. Hi, this is my case https://imgur.com/a/I1KnI (ethos) I got 6 Rx 570 4gb Sapphire Nitro+. 1 of them is Hynix, the rest are Elpidia. I'm dual mining: ETH + SIA. For SIA I'm getting 469 each. I'm wondering. My last gpu (hynix) is somehow undervolted as you can see. I have no idea how because I forgot the original BIOS file. It is much cooler than the other cards. I'm happy with the hashrate less than 1 from the others. My questions are: is it safe to get it undervolted? If yes, how can I do to the others? Please check my mem and cor also and please let me know if you see something wrong. I would like to say that I'm using 2 table fans to help it get cool. Please advice me methods to keep it cool and downgrade the hashrate if necessary. Thank you very much. Under volting is safe and helps to reduce power consumption. You might run into stability issues if you have undervolted a lot. That said undervolting shouldn't reduce your hashrate. It might be that you've that particular card running in a lower clocked state. there are 8 clock states or so iirc for amd gpu's
|
|
|
|
heavyarms1912
|
|
November 07, 2017, 09:48:56 PM |
|
First sorry for my bad england I have a problem with dual mining. I have 6x MSI RX 570 Armor 4G and i get totaly 170 mh/s and its keep going stable. When i tried to dual mining its going to about 140 mh/s. While im watching always 1 GPU decrease its mh/s and its always changing all of the gpus not just 1 GPU. And also i have 5x MSI RX 570 Gaming 4G this machine working stable while dual mining. There is only 1 different between the machines i didnt update ethos the latest update because i want to use auto fan option. -dcri 20 ETH - Total Speed: 151.012 Mh/s, Total Shares: 33(6+7+4+6+5+5), Rejected: 0(0+0+0+0+0+0), Time: 00:05 ETH: GPU0 26.371 Mh/s, GPU1 26.756 Mh/s, GPU2 26.352 Mh/s, GPU3 26.441 Mh/s, GPU4 18.154 Mh/s, GPU5 26.937 Mh/s DCR - Total Speed: 3020.229 Mh/s, Total Shares: 10(2+1+2+0+2+3), Rejected: 1(0+0+0+0+0+1) DCR: GPU0 527.426 Mh/s, GPU1 535.110 Mh/s, GPU2 527.041 Mh/s, GPU3 528.829 Mh/s, GPU4 363.077 Mh/s, GPU5 538.746 Mh/s Incorrect ETH shares: none 1 minute average ETH total speed: 141.141 Mh/s ETH: 11/06/17-13:08:53 - New job from eth-eu.dwarfpool.com:8008 ETH - Total Speed: 151.786 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:05 ETH: GPU0 20.506 Mh/s, GPU1 26.041 Mh/s, GPU2 26.162 Mh/s, GPU3 25.475 Mh/s, GPU4 27.356 Mh/s, GPU5 26.246 Mh/s DCR - Total Speed: 3035.708 Mh/s, Total Shares: 10, Rejected: 1 DCR: GPU0 410.116 Mh/s, GPU1 520.818 Mh/s, GPU2 523.234 Mh/s, GPU3 509.493 Mh/s, GPU4 547.123 Mh/s, GPU5 524.924 Mh/s GPU #5: Ellesmere, 4059 MB available, 32 compute units ETH - Total Speed: 124.192 Mh/s, Total Shares: 33(6+7+4+6+5+5), Rejected: 0(0+0+0+0+0+0), Time: 00:05 ETH: GPU0 21.167 Mh/s, GPU1 21.082 Mh/s, GPU2 26.355 Mh/s, GPU3 18.679 Mh/s, GPU4 18.862 Mh/s, GPU5 18.048 Mh/s DCR - Total Speed: 2483.846 Mh/s, Total Shares: 10(2+1+2+0+2+3), Rejected: 1(0+0+0+0+0+1) DCR: GPU0 423.342 Mh/s, GPU1 421.635 Mh/s, GPU2 527.094 Mh/s, GPU3 373.574 Mh/s, GPU4 377.243 Mh/s, GPU5 360.958 Mh/s Incorrect ETH shares: none 1 minute average ETH total speed: 141.107 Mh/s ETH - Total Speed: 141.310 Mh/s, Total Shares: 33(6+7+4+6+5+5), Rejected: 0(0+0+0+0+0+0), Time: 00:05 ETH: GPU0 21.609 Mh/s, GPU1 25.920 Mh/s, GPU2 26.955 Mh/s, GPU3 18.809 Mh/s, GPU4 27.303 Mh/s, GPU5 20.715 Mh/s DCR - Total Speed: 2826.191 Mh/s, Total Shares: 10(2+1+2+0+2+3), Rejected: 1(0+0+0+0+0+1) DCR: GPU0 432.170 Mh/s, GPU1 518.391 Mh/s, GPU2 539.092 Mh/s, GPU3 376.174 Mh/s, GPU4 546.055 Mh/s, GPU5 414.309 Mh/s Incorrect ETH shares: none 1 minute average ETH total speed: 141.097 Mh/s Using a custom/modded bios? Which one? You're most likely hitting the power limit/voltage limit. Anyways for the current BIOS you need to decrease the -dcri parameter in claymore config.txt or command line argument. You may use + or - on keyboard numpad to determine the best value for -dcri on the fly while mining to determine the best 2nd coin mining hashrate without impacting on Eth hashrate. Good luck
|
|
|
|
heavyarms1912
|
|
November 08, 2017, 02:44:41 PM |
|
First sorry for my bad england I have a problem with dual mining. I have 6x MSI RX 570 Armor 4G and i get totaly 170 mh/s and its keep going stable. When i tried to dual mining its going to about 140 mh/s. While im watching always 1 GPU decrease its mh/s and its always changing all of the gpus not just 1 GPU. And also i have 5x MSI RX 570 Gaming 4G this machine working stable while dual mining. There is only 1 different between the machines i didnt update ethos the latest update because i want to use auto fan option. -dcri 20 ETH - Total Speed: 151.012 Mh/s, Total Shares: 33(6+7+4+6+5+5), Rejected: 0(0+0+0+0+0+0), Time: 00:05 ETH: GPU0 26.371 Mh/s, GPU1 26.756 Mh/s, GPU2 26.352 Mh/s, GPU3 26.441 Mh/s, GPU4 18.154 Mh/s, GPU5 26.937 Mh/s DCR - Total Speed: 3020.229 Mh/s, Total Shares: 10(2+1+2+0+2+3), Rejected: 1(0+0+0+0+0+1) DCR: GPU0 527.426 Mh/s, GPU1 535.110 Mh/s, GPU2 527.041 Mh/s, GPU3 528.829 Mh/s, GPU4 363.077 Mh/s, GPU5 538.746 Mh/s Incorrect ETH shares: none 1 minute average ETH total speed: 141.141 Mh/s ETH: 11/06/17-13:08:53 - New job from eth-eu.dwarfpool.com:8008 ETH - Total Speed: 151.786 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:05 ETH: GPU0 20.506 Mh/s, GPU1 26.041 Mh/s, GPU2 26.162 Mh/s, GPU3 25.475 Mh/s, GPU4 27.356 Mh/s, GPU5 26.246 Mh/s DCR - Total Speed: 3035.708 Mh/s, Total Shares: 10, Rejected: 1 DCR: GPU0 410.116 Mh/s, GPU1 520.818 Mh/s, GPU2 523.234 Mh/s, GPU3 509.493 Mh/s, GPU4 547.123 Mh/s, GPU5 524.924 Mh/s GPU #5: Ellesmere, 4059 MB available, 32 compute units ETH - Total Speed: 124.192 Mh/s, Total Shares: 33(6+7+4+6+5+5), Rejected: 0(0+0+0+0+0+0), Time: 00:05 ETH: GPU0 21.167 Mh/s, GPU1 21.082 Mh/s, GPU2 26.355 Mh/s, GPU3 18.679 Mh/s, GPU4 18.862 Mh/s, GPU5 18.048 Mh/s DCR - Total Speed: 2483.846 Mh/s, Total Shares: 10(2+1+2+0+2+3), Rejected: 1(0+0+0+0+0+1) DCR: GPU0 423.342 Mh/s, GPU1 421.635 Mh/s, GPU2 527.094 Mh/s, GPU3 373.574 Mh/s, GPU4 377.243 Mh/s, GPU5 360.958 Mh/s Incorrect ETH shares: none 1 minute average ETH total speed: 141.107 Mh/s ETH - Total Speed: 141.310 Mh/s, Total Shares: 33(6+7+4+6+5+5), Rejected: 0(0+0+0+0+0+0), Time: 00:05 ETH: GPU0 21.609 Mh/s, GPU1 25.920 Mh/s, GPU2 26.955 Mh/s, GPU3 18.809 Mh/s, GPU4 27.303 Mh/s, GPU5 20.715 Mh/s DCR - Total Speed: 2826.191 Mh/s, Total Shares: 10(2+1+2+0+2+3), Rejected: 1(0+0+0+0+0+1) DCR: GPU0 432.170 Mh/s, GPU1 518.391 Mh/s, GPU2 539.092 Mh/s, GPU3 376.174 Mh/s, GPU4 546.055 Mh/s, GPU5 414.309 Mh/s Incorrect ETH shares: none 1 minute average ETH total speed: 141.097 Mh/s Using a custom/modded bios? Which one? You're most likely hitting the power limit/voltage limit. Anyways for the current BIOS you need to decrease the -dcri parameter in claymore config.txt or command line argument. You may use + or - on keyboard numpad to determine the best value for -dcri on the fly while mining to determine the best 2nd coin mining hashrate without impacting on Eth hashrate. Good luck Thanks for your answer. Im using anoraks/oc bios. Im gonna try decrease -dcri parameter. BTW should i try without anoraks modes. Anoraks bios are alright. (provided you flash the correct bios for your gpu). I am guesstimating in your case a -dcri value between 13 to 17 should be fine.
|
|
|
|
BitcoinDiamond
Newbie
Offline
Activity: 28
Merit: 0
|
|
November 08, 2017, 03:00:34 PM |
|
as for 470 570 and 580
470 and 480 produce better hashrate than 570 but it will all rely much on the memory and manufacturer if its sapphire 470 it will take u to 28-29 respectively 570 sapphire not that much as for my own experience 580 will rely much on memory but hynix can be push to 29mhz without shutting down and stable\ for modding you can email me or contact me i can help you,
What? RX 580 Hynix can do 32MH/s, well not every card, but 30MH/s with almost all of them, I would say Wolf0 can push it even more. RX 470/570 29-30MH/s is almost no problem. Depends on exact Hynix memory type and quality. Yeah I agree. My MSI 580's do 29.8Mh/s at 102W and are stable. So far 7 days constant is good. Temp is 40'C and fans are 35%. Wolf0 is the master.
|
|
|
|
Sethpop
Newbie
Offline
Activity: 1
Merit: 0
|
|
November 10, 2017, 09:38:16 PM |
|
as for 470 570 and 580
470 and 480 produce better hashrate than 570 but it will all rely much on the memory and manufacturer if its sapphire 470 it will take u to 28-29 respectively 570 sapphire not that much as for my own experience 580 will rely much on memory but hynix can be push to 29mhz without shutting down and stable\ for modding you can email me or contact me i can help you,
What? RX 580 Hynix can do 32MH/s, well not every card, but 30MH/s with almost all of them, I would say Wolf0 can push it even more. RX 470/570 29-30MH/s is almost no problem. Depends on exact Hynix memory type and quality. Yeah I agree. My MSI 580's do 29.8Mh/s at 102W and are stable. So far 7 days constant is good. Temp is 40'C and fans are 35%. Wolf0 is the master. What setting are you using that wattage and temp
|
|
|
|
tf2addict
|
|
November 10, 2017, 10:16:55 PM |
|
Can anyone recommend a good BIOS for MSI RX 570 GAMING 4GB Elpida memory? None of the ones I found on Anorak work very well at all. Either I get no hashrate improvement or they are unstable. I'll probably try modding my own using Polaris editor.
|
|
|
|
ben8jam
|
|
November 11, 2017, 07:25:21 AM |
|
Can anyone recommend a good BIOS for MSI RX 570 GAMING 4GB Elpida memory? None of the ones I found on Anorak work very well at all. Either I get no hashrate improvement or they are unstable. I'll probably try modding my own using Polaris editor.
I gave up on Anoraks. Did all mine manually using Afterburner and then flash to card. Took a long time but got far more stable results
|
|
|
|
Oakey22
|
|
November 11, 2017, 07:33:22 AM |
|
Can anyone recommend a good BIOS for MSI RX 570 GAMING 4GB Elpida memory? None of the ones I found on Anorak work very well at all. Either I get no hashrate improvement or they are unstable. I'll probably try modding my own using Polaris editor.
The best bios is your own, if you start copying others it wont be tailored to your GPU, you can use others as a starting point though.
|
|
|
|
spyshagg
|
|
November 13, 2017, 11:45:18 AM |
|
Hello guys
ETH veteran here, but wanting some feedback of these cards on XMR
Could you share your hashrates and wattages for XMR?
thanks!
|
|
|
|
juanichiloco
|
|
November 13, 2017, 12:14:36 PM |
|
Hello guys
ETH veteran here, but wanting some feedback of these cards on XMR
Could you share your hashrates and wattages for XMR?
thanks!
My Asus expedition OC RX 570's with Anorak's power save rom get 662.5h/s mining cryptonight algo. GPU only power draw in GPU Z is approx 75w, still need to test it at the wall.
|
|
|
|
spyshagg
|
|
November 13, 2017, 02:47:44 PM |
|
Hello guys
ETH veteran here, but wanting some feedback of these cards on XMR
Could you share your hashrates and wattages for XMR?
thanks!
My Asus expedition OC RX 570's with Anorak's power save rom get 662.5h/s mining cryptonight algo. GPU only power draw in GPU Z is approx 75w, still need to test it at the wall. Interesting. I have the same cards. How much ETH Mh/s do you get? Mine do 28.8 Mh/s @ 1080/1950 837mv (gpu-z 70ish watts).
|
|
|
|
p4n0rz
Newbie
Offline
Activity: 3
Merit: 0
|
|
November 13, 2017, 06:47:54 PM Last edit: November 13, 2017, 07:08:36 PM by p4n0rz |
|
My old p4n account got hacked, shit Russians... I'm getting mad trying to achieve +30Mh/s with around or less than 100w on 570s with Hynix 4Gb AJR Best strap I tried is this one found here in btctalk, that gives me 29,4MH/s @ 1160/2070 mv875: 777000000000000022339D00CE515A3D9055111230CB440900400600740114206A8900A00200312 0100F292F94273116 tRCDW: 14 tRCDWA: 14 tRCDR: 20 tRCDRA: 20 tRC: 61 tCL: 18 HWInfo gives some few memory errors, but every time i try to change something, it brings me below 29Mh/s, so I'm sticking with that one I found. I'll keep trying to make my own strap... I understand that the only fields that i should play with are tRCDW, tRCDWA, tRCDR, tRCDRA, tRC, and tCL. Am I right or I'm losing another important one?
|
|
|
|
|