Hashrate RX 570

[kingdeng]

I have a Dataland RX570 4G X-Serial, only 22.9M. how to improve?

[hoho508]

Hey guys,

I tried modding my Sapphire RX570 Nitro+ 4GB ELPIDA with Anoraks_Sapphire RX 570 Nitro(plus) 4GB OC_powersave-1500.rom and achieved hash-rate is 28.05
 & 125watts(appro).After reading all your discussion I found out im far from optimised. I would like to get help from all the pros over here to reduce the voltage to the lowest possible at the same time maintaining healthy hash rate.

[twofreckles]

Anoraks bios are alright.  (provided you flash the correct bios for your gpu).  I am guesstimating in your case a -dcri value between 13 to 17 should be fine.

Those bioses are not all right they are worth a penny at most. There is no custom work whatsoever (well could have changed but last time I looked there wasn't anything spiecial).

[percy_tc]

I have a Dataland RX570 4G X-Serial, only 22.9M. how to improve?

Make a costum bios and use blockchain driver / recent driver in compute mode

[baga105]

Getting 29.8 Mh/S on Sapphire rx 570 Nitro+ 8gb (Samsumg). Gpu-Z says 86W on ETH mining, and 116W on dual mining DCR. My question is: Is there still some room for improvement, and if there is somebody who is willing to help me with that?

[ben8jam]

Why doesn't anyone use an actual Watt meter when quoting their desired draw per card? There is no 570 that is pulling 100W or less, unless you are hashing at 10mhs.

GPUz and HWinfo numbers are useless.

[baga105]

Why doesn't anyone use an actual Watt meter when quoting their desired draw per card? There is no 570 that is pulling 100W or less, unless you are hashing at 10mhs.

GPUz and HWinfo numbers are useless.

Because i forgot it at home mr. Will give u the "real" results tomorrow

[mehrdadb3]

hello guys
i have MSI Gaming X RX 570 4 GB (Elpida) and i get 22 mh in stock bios with mod bios polaris 25 and with overclock memory get 27.5
but i cant increase my memory clock over 1950 i put core clock on 1070 on other dont toch
some user put memory 2100 and core clock 1200 and get 29
why i cant?
my driver blockchain amd

[baga105]

Why doesn't anyone use an actual Watt meter when quoting their desired draw per card? There is no 570 that is pulling 100W or less, unless you are hashing at 10mhs.

GPUz and HWinfo numbers are useless.

Because i forgot it at home mr. Will give u the "real" results tomorrow

Computer Idle: 80W
Dual mining with 3x Sapphire Nitro+ Rx 570 8gb : 480W

Screenshot: http://prntscr.com/hbyjde

I believe that there is still some room for improvement..

[willi9974]

Hello,

If i buy a GPU from the Type Sapphire Radeon RX 570 NITRO+ 4G
What is the hashrate what i can get with bios editing only with tripe copy and adjust the Memory Speed and other power Setting, without special custom timing

Best Regards
Willi

[baga105]

Hello,

If i buy a GPU from the Type Sapphire Radeon RX 570 NITRO+ 4G
What is the hashrate what i can get with bios editing only with tripe copy and adjust the Memory Speed and other power Setting, without special custom timing

Best Regards
Willi

Depends on the type of RAM i guess, but you should easily get to 28..

[silversoul]

Hello,

If i buy a GPU from the Type Sapphire Radeon RX 570 NITRO+ 4G
What is the hashrate what i can get with bios editing only with tripe copy and adjust the Memory Speed and other power Setting, without special custom timing

Best Regards
Willi

Depends on the type of RAM i guess, but you should easily get to 28..

Hay i recently built a rig with same Sapphire Radeon RX 570 NITRO+ 4G elpida memory, moded 1500 starp to above. getting 25.9 hash max, any suggestions. Where am i going wrong.

[zsugabubus007]

Hello everyone,

I have a core clock problem with an MSI Armor RX570 4GB (Hynix) card.
As you can see on the picture below, one of my card's OC is stable, but on the second one the core clock fall back after a few seconds of running..
https://prohardver.hu/dl/upc/2017-11/212990_rx570_problem.png

Memory clock is stable on both cards. I tried Afterburner (4.4.0 Beta 16) and Claymore's OC settings but none of them works.
Did anyone face this problem before?

Thanks in advance,
zsugabubus007

[kb8679]

Hey.

I searched for a performance oriented VBIOS for Sapphire RX570 ITX (Pulse Mini) 4GB. My cards have both elpida & hynix memories. As none of the ROMs I found were satisfactory (reached about 25mhs, only ETH), I managed, after a few hours, to modify my own VBIOS.

I'm dual mining ETH+DCR and have a stable rates of 30MH/s & 540MH/s respectively. Mem clock 2050MHz & core @ 1200. This is definitely not power efficient (whole rig pulls approximately 1500W out of the wall. 8 GPU's). And temps stay around 65C-68C. This is a little pet project of mine. Picture attached. Also a link to the modified VBIOS rom is provided, hopefully someone finds it useful. If you try it out, let me know how it worked for you. Use at your own risk. This has been stable for my setup but you never know...

EDIT: There were some instability which resulted in bad ETH shares, current settings and hashes are: 29MH/s & 525MH/s, mem clock 2000, core 1150 and powertune set to 3. This appears to have increased the stability a lot, and power usage dropped from 1500W to 1400W. Also temperatures dropped to around 60C. Much better.

http://fileshare.link/3151e62397ea7762/S_RX570ITX_4GB.rom

https://i.imgur.com/nacqneM.jpg

[Iomgui]

Hi guys,

I think i m slowly gliding to Madness but here is my problem if anyone can help.

I have MSI RX570 Armor 4G Elpida memory. I did the bios mod by copying the 1500 strap to higher ones. I m Under win10 pro fully up to date. Now whatever driver i try i never get better than 25MH solo ETH.
Even stranger, i m at 25MH at 1750 mem, and if i put higher mem up to 2000, the hashrate either doesnt change or drop a little to 24.

I tried a full reinstall.
I tried blockchain driver 17.3 : cant use it the graphic card is not seen by miners (but is seen ok in system information or gpu Z)
I tried blockchain drivber 17.4 : i can change RAM Under afterburner but i cant reset it to 1750
Latest radeon (29 november) : same problem (i use compute mode of course)

The OC of RAM is made Under afterburner, but i tried wattool too with same result : no improve in hashrate. Under HWInfo64 i can see that the RAM is OC to 2000.

I dont know what to try my sanity is on edge its been 2 days i ve been trying so any clue, even little would be greatly appreciated. I guess i m good for a new clean reinstall ...

[Swiped]

running sapphire rx nitro+ 570 8g with Hynix memory with block chain drivers, 1750 strap mod (or uber mod) but nothing gets me over 25 Mh/s and is still stable.  I have 470 8g and 480 8g cards running at 28+ all day long, but these 570 8g cards with Hynix are appearing to be crap cards.  Anyone had better luck and what have you done to get them tuned up higher.  Any core overclocking over 2000 makes the cards freeze.  Would love to hear from those that have been successful in finding a way to make these cards run at 28+.

[juanichiloco]

Hello guys

ETH veteran here, but wanting some feedback of these cards on XMR

Could you share your hashrates and wattages for XMR?


thanks!

My Asus expedition OC RX 570's with Anorak's power save rom get 662.5h/s mining cryptonight algo.

GPU only power draw in GPU Z is approx 75w, still need to test it at the wall.

Interesting. I have the same cards.  How much ETH Mh/s do you get?   Mine do 28.8 Mh/s @ 1080/1950  837mv  (gpu-z 70ish watts).    

Sorry for the late reply, with Eth using Claymores I get 27mh/s without any OC mods, just the updated bios so you should get higher than mine anyway.

Does anyone have good settings in MSI Afterburner for XMR mining with the RX 570 above?

[henrynguyen20]

Hi
Can anyone help me if there is something missing or doing wrong during the set up because I got a weird hashate
ok I got 3 MSI rx 570 4 GB (Elpida), 1 MSI Rx 580 4 GB (Elpida), 1 Asus Rx 580 8 GB (samsung), I set the virtual mem to 40 GB, window 10 version 1709
and I'm using AMD blockchain driver released on August 2017,  4G encoding enabled, PCI speed is gen 2 cuz I'm using Asus Z270 AR,
and all cards only run at 14 mh/s at stock, is it suppose to run at 19-20 mh/s at stock ? Thanks, I really appreciate

[heavyarms1912]

Hi
Can anyone help me if there is something missing or doing wrong during the set up because I got a weird hashate
ok I got 3 MSI rx 570 4 GB (Elpida), 1 MSI Rx 580 4 GB (Elpida), 1 Asus Rx 580 8 GB (samsung), I set the virtual mem to 40 GB, window 10 version 1709
and I'm using AMD blockchain driver released on August 2017,  4G encoding enabled, PCI speed is gen 2 cuz I'm using Asus Z270 AR,
and all cards only run at 14 mh/s at stock, is it suppose to run at 19-20 mh/s at stock ? Thanks, I really appreciate

Supposed to run at 21-22.x at stock.  Are you supplying enough power to all the cards?  Troubleshoot card by card.

[henrynguyen20]

Hi
Can anyone help me if there is something missing or doing wrong during the set up because I got a weird hashate
ok I got 3 MSI rx 570 4 GB (Elpida), 1 MSI Rx 580 4 GB (Elpida), 1 Asus Rx 580 8 GB (samsung), I set the virtual mem to 40 GB, window 10 version 1709
and I'm using AMD blockchain driver released on August 2017,  4G encoding enabled, PCI speed is gen 2 cuz I'm using Asus Z270 AR,
and all cards only run at 14 mh/s at stock, is it suppose to run at 19-20 mh/s at stock ? Thanks, I really appreciate

Supposed to run at 21-22.x at stock.  Are you supplying enough power to all the cards?  Troubleshoot card by card.

Thanks for helping, I'm using Corsair 1200 Watt for PSU.  I tried to uninstall drivers by using DDU and re-install again but they are still the same rate, all cables and risers are fine