Hashrate RX 570

[preda]

hiting all my rx 570 Sapphire nitro 4gb (hynix) and 8gb( micron) 29+ mh/s with arround 85w/each

how??

i try to use msi afterburner without success

[preda]

how i can modify 900mv?

Afterburner, Overdriventool,...

how??

i try to use msi afterburner without success


today i got 2 new itx pulse saphire rx 570 and stock bios does 28.5 mh eth how is possible???

[heavyarms1912]

how i can modify 900mv?

Afterburner, Overdriventool,...

how??

i try to use msi afterburner without success


today i got 2 new itx pulse saphire rx 570 and stock bios does 28.5 mh eth how is possible???

is voltage locker or unlocked in Afterburner?
change voltage and also change the clocks and apply together in AFB.  that worked for me.

[heavyarms1912]

What are you guys using for voltages at clocks 1200 odd?  Is 825-850 good range or 850-900 ?

Currently 8 x RX570 are doing 7460 H/s on cryptonight using xmr-stak-amd and consuming roughly ~ 770w from wall (800w - 30w for cpu and other components)

[preda]

how i can modify 900mv?

Afterburner, Overdriventool,...

how??

i try to use msi afterburner without success


today i got 2 new itx pulse saphire rx 570 and stock bios does 28.5 mh eth how is possible???

is voltage locker or unlocked in Afterburner?
change voltage and also change the clocks and apply together in AFB.  that worked for me.

locked and i cant unlock cause i have blockchain drivers

[heavyarms1912]

how i can modify 900mv?

Afterburner, Overdriventool,...

how??

i try to use msi afterburner without success


today i got 2 new itx pulse saphire rx 570 and stock bios does 28.5 mh eth how is possible???

is voltage locker or unlocked in Afterburner?
change voltage and also change the clocks and apply together in AFB.  that worked for me.

locked and i cant unlock cause i have blockchain drivers

I am unsure if it's tied to blockchain drivers as I have it unlocked on mine (using 8/8/17 driver). 
It was locked earlier using same drivers.  The only thing that changed this I can reckon is I flashed one BIOS on one of my cards with just memory shift mod without touching on the clocks/volts.  Usually I have to patch the rx 570 cards but it wasn't necessary on this one.

If AFB is locked then use overdriveNTool.  You will have to use make adjustments > save to profile > hit reset all > apply profile.  Should work then.
Note:  If you have modded BIOS and higher volts in the memory section (300,1000 or 2000 Mhz) the card picks up that voltage even if you under volted on the core.

[Mattthev]

What are you guys using for voltages at clocks 1200 odd?  Is 825-850 good range or 850-900 ?

Currently 8 x RX570 are doing 7460 H/s on cryptonight using xmr-stak-amd and consuming roughly ~ 770w from wall (800w - 30w for cpu and other components)

Both are possible it depends on quality.

[raiderosik]

hiting all my rx 570 Sapphire nitro 4gb (hynix) and 8gb( micron) 29+ mh/s with arround 85w/each

how??

i try to use msi afterburner without success

Fully restored my full rig with this guide, this guy made a really good job.
https://mining.help/

1. extra point can add to this guide instal teamviewer or any other remote desktop before starting i had a moments here when my cards crashed after bios update and the only way to get into and patch it was to connect via TV

[Call_Me_Bambi]

hiting all my rx 570 Sapphire nitro 4gb (hynix) and 8gb( micron) 29+ mh/s with arround 85w/each

how??

i try to use msi afterburner without success

Fully restored my full rig with this guide, this guy made a really good job.
https://mining.help/

1. extra point can add to this guide instal teamviewer or any other remote desktop before starting i had a moments here when my cards crashed after bios update and the only way to get into and patch it was to connect via TV

Thanks for the tip, I have just changed from using MSI Afterburner to OverdriveNTool and was looking for a guide to help optomize its settings - this was most helpfull.

[unsivilaudio]

Just wanted to chime in here, I've had pretty good luck with my cards overall, but am questioning one card in particular.  All of my cards are MSI Armor 4G oc's, most are SK-Hynix, but I have 2 that are Elpida, one of which is particularly weak.  I originally pressed forward with my normal vbios mod (one-click mem, undervolt everywhere), but was shocked to find I couldn't hit even 2000mhz without instant failure.  So I reinstalled the stock vbios, loaded up a miner, and began to tweak my overclock.  Seemed to be holding 1950mhz mem; at 1970mhz it would die within about 30 seconds (again, this is STOCK everything). Anyways after fiddling with it for a few hours, I gave up, and put my modded bios back on there.

Long story short, I have 1200/1920mhz/900mv stable on this card (easily my weakeast) at 830H/s cryptonote, anything higher would result in incorrect shares.

Could I really have been this unlucky in the silicon lottery?  I was reading multiple places, people were hitting 2000mhz on Elpida memory.   

[zipa13]

My Asus Strixx Rx 570 4gb OC with Elpida memory,give 30.5mh/s with 1150/2050.Without any problems.7 card rig,draw 1030w from the wall

[heavyarms1912]

Just wanted to chime in here, I've had pretty good luck with my cards overall, but am questioning one card in particular.  All of my cards are MSI Armor 4G oc's, most are SK-Hynix, but I have 2 that are Elpida, one of which is particularly weak.  I originally pressed forward with my normal vbios mod (one-click mem, undervolt everywhere), but was shocked to find I couldn't hit even 2000mhz without instant failure.  So I reinstalled the stock vbios, loaded up a miner, and began to tweak my overclock.  Seemed to be holding 1950mhz mem; at 1970mhz it would die within about 30 seconds (again, this is STOCK everything). Anyways after fiddling with it for a few hours, I gave up, and put my modded bios back on there.

Long story short, I have 1200/1920mhz/900mv stable on this card (easily my weakeast) at 830H/s cryptonote, anything higher would result in incorrect shares.

Could I really have been this unlucky in the silicon lottery?  I was reading multiple places, people were hitting 2000mhz on Elpida memory.   

Well you can put custom timings for that 1900 Mhz range.  Although default clocks it should clock 2000+.  personally I have never tried to OC and check stability on stock BIOS above 2000. I do have an armor card that doesn't go above 1950 on my custom timings (Hynix)  Rest can do 2020-2100 range.

[unsivilaudio]

I do have custom timings (one-click in PBE which is a 1:1500-2000), which I think is the only reason I'm getting the hash I am. I'm just surprised to see that huge of difference in ram quality between manufacturers.  I had another incorrect share pop up so I've since lowered again to 1910.

My Hynix cards shine for sure, two of them at 1200/2190mhz (~930H/s) and are picking up the slack of my rig.  690w @ the wall btw.  I like it.

[heavyarms1912]

I do have custom timings (one-click in PBE which is a 1:1500-2000), which I think is the only reason I'm getting the hash I am. I'm just surprised to see that huge of difference in ram quality between manufacturers.  I had another incorrect share pop up so I've since lowered again to 1910.

My Hynix cards shine for sure, two of them at 1200/2190mhz (~930H/s) and are picking up the slack of my rig.  690w @ the wall btw.  I like it.

Well you've not experienced the insane performance drop on 1060s.  gtx 1060 with Hynix can't even do 21 Mh/s while those with Microns and Samsungs can do 24-25 Mh/s (with same kind of overclock)

Here's one Elpida of mine 31.2 + 300 while mining ETH+PASL.  That's a RX580 Nitro+ and a Gigabyte Gtx 1060 with Hynix memory.
https://imgur.com/a/dd3Jl

[unsivilaudio]

Ha. My roommate just picked up a rx580 to play with, and wouldn't ya know it, elpida memory.  Doesn't appear to like one-click memshift either. Still warrants further research though, the hashrate on it is no better than my 570s.

[raiderosik]

Ha. My roommate just picked up a rx580 to play with, and wouldn't ya know it, elpida memory.  Doesn't appear to like one-click memshift either. Still warrants further research though, the hashrate on it is no better than my 570s.

Hashrate for570/580 are really similar and with good memory for example hynix you could beat  580. But it all goes with single card. my hynix give me less then my micron

[KarlKox]

Hi
i am desperate with hashrate of my sapphire Rx570 nitro+ 8GB hynix. I try almost everythink but still gk start without overcloking on 17.5 Mhs, after overclocking gpu-1340 mem 2250 i get only 23,5Mhs.
For timing memory is used "1500" value.
system:
win 7 + mining drivers http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx
hw:
core2 duo d8500, 4GB mem psu 620w. without risers.
actually dag is 162. In computers is only one gk (overclocking/testing board).
can somebody help me where is the problem? why gk has a low hashrate? (no problem with gigabyte 560 to get 15mhs) maybe some dag fix or somethink?

[ikicha]

I Want to report again, i have 5 RX 570, i try to mining SkunkHash Algorithm
With Bios Mod, i got

Powercolor Red Devils : 16.55 MH/s
Dataland : 15.79 MH/s
Asus Strix OC : 17 MH/s

i using, Prospector Mining Software

[KarlKox]

I answer for my question.
Problem is in win7 and AMD drivers.
there is missing option switch card as compute. 
i try mining and two gaming drivers ... for all the same result of hashrate.

[raiderosik]

I answer for my question.
Problem is in win7 and AMD drivers.
there is missing option switch card as compute. 
i try mining and two gaming drivers ... for all the same result of hashrate.

New drivers give you extra power for your GPU, but also good bios setup is very important:)