pankno1
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 13, 2018, 03:41:34 PM |
|
I have MSI RX 570 Armor OC 4GB with Hynix memory.
The best stable results I've got is 27.3 MH/s with memory straps 2:1500 to 2:2000 and memory clock of 2000. Has anyone got better results or recommendations how to get it better?
and which "GPU only Power Draw" is shown in GPU-Z->Sensors during mining? thanks in advance georg Hey, 122W. I haven't done any undervolting or underclocking GPU though, for now electricity isn't important for me. If it isnt personal how much monthly do you pay usually? [Is there any video tutorials how to use bitcointlk?]
|
|
|
|
Call_Me_Bambi
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 13, 2018, 09:00:13 PM |
|
If it isnt personal how much monthly do you pay usually? [Is there any video tutorials how to use bitcointlk?]
Bitcointalk is just like any other forum you post, you get a reply, rinse and repeat. There's nothing really complicated about it, if there is something you need to know then Bitcointalk has its own help section https://bitcointalk.org/index.php?action=help
|
|
|
|
ArtSmart
Newbie
Offline
Activity: 12
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 15, 2018, 07:46:18 PM |
|
Hello, everynone! I have few 4x Powercolor RX 570 Red Devil rigs. Each card produces ±29MH/s. Windows 10 Pro, AMD Crimson-ReLive-Beta-Blockchain-Workloads-Aug23 drivers (22.19.659.0), BIOS moded 1500 straps, to 1625,1750, 2000MHz, Claymore miner 10.3 But have very very annoying problem: I want to lower power consumption. As I understand best way is to lower GPU core clock. If I lower it on MSI Afterburner to 0.8V, GPU-z shows almost 0.92V. In such scenario one card uses about 95W (GPUZ), and about 125W on the wall. Seems quite good result, but if I touch any slider (i.e. change fans peed) on Afterburner, voltage goes back to 1.1+V and power rises to ±150W (GPUZ). Voltage increases back also when Claymore miner restarts. It is freaking annoying. Because i need to monitor if voltage is not changed back and I have overconsumption and additional cost and worthless heat. Tried to use Claymore settings via .bat for voltage regulation - it won't work also ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) With Spahhire Trixx i can lower voltage as supposed, but I can't find how to do it on all cards. Is it possible to disable that variable voltage, so that I always had constant 0.9V and forgot that routine maintenance of checking if voltage is the same. Plus, I think I can lower consumption to 85W (GPUZish) and have stable system. P.S. I lowered memory voltage to 0.9V via BIOS editor. But somewhere on forums read, that if you mess with something more than straps, than variable voltage action kicks in action. Is this true? My system screenshot: https://i.imgur.com/7xfasqB.jpg
|
|
|
|
nitrobg
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 413
Merit: 17
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 15, 2018, 09:42:55 PM |
|
Use OverdriveNTool and set both memory and core voltage to the same value. Remove afterburner, you don't need it.
|
|
|
|
tg88
Legendary
Online
Activity: 2492
Merit: 1429
Payment Gateway Allows Recurring Payments
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 16, 2018, 10:46:19 AM |
|
Remove the afterburner and probably the settings via claymore will work.
|
|
|
|
Miner_GR
Newbie
Offline
Activity: 16
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 19, 2018, 11:48:14 PM |
|
Hi I have SAPPHIRE Radeon RX 570 PULSE ITX 4 GB GDDR5. I have around 17.6 MH/s stock with claymore which is quite dissapointing. Can somebody help?
Windows 7 64bit first GPU is 1060 3gb
|
|
|
|
unsivilaudio
Newbie
Offline
Activity: 18
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 20, 2018, 12:21:01 AM |
|
|
|
|
|
ArtSmart
Newbie
Offline
Activity: 12
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2018, 07:08:10 AM |
|
Thank you for the help. One question: is there way to set constant fan speed (i.e. 50%) in OverdriveNTool? Cause those spining and stoping down fans, makes me crazy ...
|
|
|
|
Call_Me_Bambi
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 29, 2018, 01:16:38 PM |
|
Thank you for the help. One question: is there way to set constant fan speed (i.e. 50%) in OverdriveNTool? Cause those spining and stoping down fans, makes me crazy ...
Maybe I'm a little late here and you have already figured it out. I've not tried this but here is a suggestion, set both Min and Max fan rpm to the same value (e.g. your 50%) then set the Target Temp to well below ambient temperature, say 0 degrees. This should force the fans to come on and stay at the 50% rpm.
|
|
|
|
greatauror28
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 181
Merit: 101
Ethereum Miner
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 05, 2018, 06:52:28 PM |
|
Thank you for the help. One question: is there way to set constant fan speed (i.e. 50%) in OverdriveNTool? Cause those spining and stoping down fans, makes me crazy ...
Maybe I'm a little late here and you have already figured it out. I've not tried this but here is a suggestion, set both Min and Max fan rpm to the same value (e.g. your 50%) then set the Target Temp to well below ambient temperature, say 0 degrees. This should force the fans to come on and stay at the 50% rpm. I always have these settings across all rigs regardless of cards: -tt 65 -fanmin 40 -fanmax 90 -tstop 85 My mining rig room is about 18C and cards stay <60C. These are a mix of Nitro+ 580, Gaming X 580 and Strix 570s.
|
I build and sell rigs! I also sell ssd clones of the most stable Windows+Claymore+AMD driver combo you'd ever used.
|
|
|
baga105
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 05, 2018, 10:41:16 PM |
|
Hello, can you help me with a bios mod shappire nitro + rx 570 8gb samsumg..
Hit me up on PM, and i would try to help u.
|
Ass, Gas or Grass! No one rides for free!
|
|
|
_voyager_
Newbie
Offline
Activity: 12
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 09, 2018, 10:17:18 PM |
|
Hello everyone,
My supplier offer me Power Color RX 570 8Gb (PN: AXRX 570 8GBD5-DM) but I can't find it on official PowerColor site. Anyway, what ETH hashrate could I expect with modded BIOS on this card?
|
|
|
|
tadeus1
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 140
Merit: 11
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 09, 2018, 10:40:19 PM |
|
27 - 30 depending on your lucky number.
|
|
|
|
burntmytoast
Newbie
Offline
Activity: 25
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 09, 2018, 10:43:46 PM |
|
All you need to do is use polaris one click editor to modify bios and then flash it.
|
|
|
|
willi9974
Legendary
Offline
Activity: 3542
Merit: 2820
Escrow Service
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 15, 2018, 03:25:52 PM |
|
Hello,
i have a AMD Sapphire Radeaon RX 570 ITX Pulse 4GB Card with Samsung memory, but the linux os says the bios is not ok or is corrupt. who can i get a org or modded bios for that card?
Best regards Willi
|
|
|
|
Mattthev
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 15, 2018, 08:22:11 PM |
|
Hello,
i have a AMD Sapphire Radeaon RX 570 ITX Pulse 4GB Card with Samsung memory, but the linux os says the bios is not ok or is corrupt. who can i get a org or modded bios for that card?
Best regards Willi
I might have that one on store or you can find original here https://www.techpowerup.com/vgabios/
|
|
|
|
deksa
Newbie
Offline
Activity: 94
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 16, 2018, 09:01:35 AM |
|
Guys? A little help here please?
Asus RoG Strix Radeon RX 570 OC 4GB = 309e Asus RoG Strix RX 580 OC Gaming 8GB = 418e
Which one of these is best buy? Is 4GBs of graphic card RAM enough for now? And for how long? Are the 109e per card worth going for the extra 4 GBs of RAM and the model 570 to 580? I plan on getting 3 of these cards.
Thanks!
|
|
|
|
nitrobg
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 413
Merit: 17
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 16, 2018, 09:21:04 AM |
|
Don't buy such overpriced cards, wait for the prices to normalize. Neither of them is worth the money.
|
|
|
|
deksa
Newbie
Offline
Activity: 94
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 16, 2018, 09:23:28 AM |
|
I know but there are no GPUs on the market except these few offers and regardless the price, they will ROI eventually which is better then waiting and doing nothing ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
tadeus1
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 140
Merit: 11
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 16, 2018, 05:18:31 PM |
|
I would probably go for Asus RoG Strix Radeon RX 570 OC 4GB from the two - if wanted to buy a card now. The extra 100+E are not justified in my opinion. Gain of may be 1-2 mh in eth tops. And the "better resale value" on the 8 GB 580 is bollocks if you ask me.
|
|
|
|
|