ASICMINER Auction: 50 Block Erupter Blades CHECK OP FOR PAYMENT

[dogie]

So what are people planning to power these with? I was thinking of getting a beefy laptop adapter and cutting the end off, but I'm not entirely sure how to wire it - all the cases I've seen seem to have something different.

[1715077940]

1715077940

[DiabloD3]

So what are people planning to power these with? I was thinking of getting a beefy laptop adapter and cutting the end off, but I'm not entirely sure how to wire it - all the cases I've seen seem to have something different.

Just get a normal PSU and buy molex splitters and cut the 12v wire off the split ends (leave the 5v safely attached).

[phiz]

Just get a normal PSU and buy molex splitters and cut the 12v wire off the split ends (leave the 5v safely attached).

Be sure to check the actual rating on the rails. If going with an ATX PSU you're probably better off using the PCIe or CPU connectors which typically have a dedicated or at least high-powered rail. Assuming this board needs 80w and connecting a disk/peripheral rail off a cheapo 150w PSU could well end in trouble.

[Pinwheel]

why not run next auction in little bit more professional way. let say use some auction script, when everybody will see bids in real time as well as counts. In present situation people staring posting their bids in last minutes because nobody can scroll trough 5 pages in one minute and get a picture of what is going on.

I'm lost and sad about it, same as many others. I really hope something can be done for next rounds.

[wsoei]

why not run next auction in little bit more professional way. let say use some auction script, when everybody will see bids in real time as well as counts. In present situation people staring posting their bids in last minutes because nobody can scroll trough 5 pages in one minute and get a picture of what is going on.

I'm lost and sad about it, same as many others. I really hope something can be done for next rounds.

I totally agree with this.  Even though I didnt bid in this auction, the last few minutes got out of control.  This will be important for the USB miners since it'll be in an affordable range for the majority of bidders.

[dogie]

So what are people planning to power these with? I was thinking of getting a beefy laptop adapter and cutting the end off, but I'm not entirely sure how to wire it - all the cases I've seen seem to have something different.

Just get a normal PSU and buy molex splitters and cut the 12v wire off the split ends (leave the 5v safely attached).

So the two yellows into the same port that this guy has a red cable in:

And two blacks into where he has a black.

That makes sense, but then why is he additionally bridging those connectors? Wonder where I can get wire that diameter lose and not on a 30m cable

[dogie]

Although saying that I think I'd still be more comfortable butchering a laptop adapter like http://www.amazon.co.uk/Desktop-power-supply-cord-120w/dp/B004SRH1PI/ref=sr_1_1?s=electronics&ie=UTF8&qid=1367267668&sr=1-1&keywords=12v+power+supply+10a.

That should work right? Now just need to find some extra cable.

[furuknap]

why not run next auction in little bit more professional way. let say use some auction script, when everybody will see bids in real time as well as counts. In present situation people staring posting their bids in last minutes because nobody can scroll trough 5 pages in one minute and get a picture of what is going on.

I'm lost and sad about it, same as many others. I really hope something can be done for next rounds.

I agree, although I thought John K and others did a fantastic job this time, I certainly question some of the wisdom of 1) starting the auction in the weekend and 2) start experimenting with an auction bot in the middle of an auction.

I suggest that before we put the auction bot into production, that we test it thoroughly in a series of simulated auctions first.

Perhaps the idea of pre-approving bidders may work too; if nothing else it would vet who bids so we eliminate fake bidders.

A final suggestion would be to have some kind of auto-bid or proxy-bid, where John K, for example, could hold hidden bids for someone with specific rules for bidding. Let's say user BIDDER wants to bid up to ฿70, start bidding when minimum price exceeds ฿20, and bid ฿1 over current low bid. When first bid exceeds ฿20, John could announce "Bid by proxy for BIDDER: 1@฿21". Later, when ฿21 falls off the list, and let's say the new lowest bid is ฿25, John could again announce "Bid by prody for BIDDER: 1@฿26"

This would put a burden on John, though, so it would require a tip or service fee, but could also ease the frentic last-minute buying and could give people a fair shot up to the level they are comfortable bidding.

.b

[Minor Miner]

I would have bought five at the last price but I did not know what it was and was trying to figure on my sheet what the new min bid was.   I thought I was ok for at least two but going through 6 pages of bids in the last 6 minutes is hard.  They would get a higher price if all the people (like me) who were bidding 2 @47 thinking they put them up two levels of current prices actually knew they were "out".
Do not feel that is a criticism of john because he does a great job (especially at 2AM) more of a suggestion that this is not the proper format to auction 300 "mini miners" or whatever the USBs are called

[WinVery.com]

Should anyone want to pick up 2 blades: https://bitcointalk.org/index.php?topic=191149.msg1979280 I plan to be the first winner paid. 

[Noitev]

when I get mine, I'm probably just gonna offer some btc for a walk-through... Kinda too stupid for anything that isn't a plug in and play usb type deal.

[Gomeler]

Should anyone want to pick up 2 blades: https://bitcointalk.org/index.php?topic=191149.msg1979280 I plan to be the first winner paid. 

Yeah.. go fuck yourself. I understand what you are doing is fair and legal but the sentiment stands.

[furuknap]

For those that didn't win, you may want to consider getting som AM shares while you're waiting for the next auction. Both BTCT.co and Bitfunder offers PT shares and there are sometimes auctions for regular shares too.

Here's a guide I wrote earlier:
http://coin.furuknap.net/how-to-buy-asicminer-shares/

Disclaimer: I'm a current share holder and benefit directly from a high share price.

[WinVery.com]

Should anyone want to pick up 2 blades: https://bitcointalk.org/index.php?topic=191149.msg1979280 I plan to be the first winner paid. 

Yeah.. go fuck yourself. I understand what you are doing is fair and legal but the sentiment stands.

They broke a cardinal rule of auctioneering; Not immediately allowing a buyer to pay.
Your sediment notwithstanding,  I'll manage to stay afoot.

[Rodyland]

A final suggestion would be to have some kind of auto-bid or proxy-bid, where John K, for example, could hold hidden bids for someone with specific rules for bidding. Let's say user BIDDER wants to bid up to ฿70, start bidding when minimum price exceeds ฿20, and bid ฿1 over current low bid. When first bid exceeds ฿20, John could announce "Bid by proxy for BIDDER: 1@฿21". Later, when ฿21 falls off the list, and let's say the new lowest bid is ฿25, John could again announce "Bid by prody for BIDDER: 1@฿26"

This would put a burden on John, though, so it would require a tip or service fee, but could also ease the frentic last-minute buying and could give people a fair shot up to the level they are comfortable bidding.

.b

I hope I'm not the only one to say "fuck that idea", pardon my language.

I think having the auctioneer manage your bidding for you is a ROTTEN idea.  If you want to pay someone to bid according to your instructions, fine.  But the auctioneer is the absolute worst person to do this.

[Phil21]

As a bidder, I thought this was fine.  Better than just sitting on ebay with 0 bids until 5 minutes before the end watching everyone's snipe-bots go to work.

Granted, my last bid was a bit short due to the speed at which things were moving - but I also knew that possibility while placing it.  Had I actually wanted to spend more, I would have

Congrats to the winners!  Based on my model these guys will all make money, but probably won't get rich any time soon.  Looking at 90-120 day payback based on what I think difficulty is going to do in that time period.  Very tempting to have tossed in that last few coins per unit, but you make models and rules for a reason

[michelet]

A final suggestion would be to have some kind of auto-bid or proxy-bid, where John K, for example, could hold hidden bids for someone with specific rules for bidding. Let's say user BIDDER wants to bid up to ฿70, start bidding when minimum price exceeds ฿20, and bid ฿1 over current low bid. When first bid exceeds ฿20, John could announce "Bid by proxy for BIDDER: 1@฿21". Later, when ฿21 falls off the list, and let's say the new lowest bid is ฿25, John could again announce "Bid by prody for BIDDER: 1@฿26"

This would put a burden on John, though, so it would require a tip or service fee, but could also ease the frentic last-minute buying and could give people a fair shot up to the level they are comfortable bidding.

.b

I hope I'm not the only one to say "fuck that idea", pardon my language.

I think having the auctioneer manage your bidding for you is a ROTTEN idea.  If you want to pay someone to bid according to your instructions, fine.  But the auctioneer is the absolute worst person to do this.

I agree with you. I trust John (he has a lot of my coins right now) but I think It would not be transparent in this way.
Today it has been a mess but at least it is transparent.

[dogie]

So my current powering plan:

Fresh Corsair CX 500W, 500W on a single 12V rail [I need to power 2].
http://www.amazon.co.uk/gp/product/B009RMP2VE/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A3P5ROKL5A1OLE
3xMolex splitters, incase I get raped by one.
http://www.amazon.co.uk/gp/product/B000067SLY/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A3P5ROKL5A1OLE
1x paper clip
boat load of duct tape to stop me killing myself
100x 200mm cable ties, must be able to ghetto mount them vertically somehow
3x generic 120mm fans for some overclockage
Some 15A 12V generic cable to short the different rails
http://www.ebay.co.uk/itm/180513876557
2xnetwork cables

I should be all set now right? Have a wire crimper/stripper, nothing else I need?

Cheers guys.

[michelet]

FAQ updated! Freebie available for 10+ board purchases!

Freebie for bidding 10 or more boards: This neat rack! (http://imgur.com/a/PkOcu#4)Shipping is FREE!

Is it possible to buy it? If yes which is the price?

[furuknap]

A final suggestion would be to have some kind of auto-bid or proxy-bid, where John K, for example, could hold hidden bids for someone with specific rules for bidding. Let's say user BIDDER wants to bid up to ฿70, start bidding when minimum price exceeds ฿20, and bid ฿1 over current low bid. When first bid exceeds ฿20, John could announce "Bid by proxy for BIDDER: 1@฿21". Later, when ฿21 falls off the list, and let's say the new lowest bid is ฿25, John could again announce "Bid by prody for BIDDER: 1@฿26"

This would put a burden on John, though, so it would require a tip or service fee, but could also ease the frentic last-minute buying and could give people a fair shot up to the level they are comfortable bidding.

.b

I hope I'm not the only one to say "fuck that idea", pardon my language.

I think having the auctioneer manage your bidding for you is a ROTTEN idea.  If you want to pay someone to bid according to your instructions, fine.  But the auctioneer is the absolute worst person to do this.

It doesn't have to be John, it can be anyone, but it should be a trusted party. However, it is common in other situation to have the auctioneer hold bids, although they tend to be realtime (calling for bids, rather than people submitting them).

.b