[ANN] Cachecoin |CACH| POW+POS | NO PREMINE | NO ICO | CRYPTOPIA |

[MemberCount+1]

do not use a Version like this
CACHeCoin version v5.4.0.0-g32a928e-kal or something like that
this was a small mistake from the dev and he work on a better solution.

coinexchange and cryptotrade working fine, a new snapshot from today for a fresh install is online.

cryptopia is using: V5.3-42-g30a2321-kal

Anyone me a link for me? I will test it.

[1715285547]

1715285547

[1715285547]

1715285547

[jjiimm_64]

JFTR.. if your going to try and give a roadmap for development... this is a good example:
https://github.com/dashpay/dash-roadmap/blob/master/README.md

[kiffner]

I am happy i didn't sold my rigs with r7 240.... 

whats the plan for new NF? 14 like ultracoin?

[jjiimm_64]

I am happy i didn't sold my rigs with r7 240.... 

whats the plan for new NF? 14 like ultracoin?

not much information has been given about the 'New POW algorithm'

so, we are in the dark

[MemberCount+1]

I am happy i didn't sold my rigs with r7 240....  

whats the plan for new NF? 14 like ultracoin?

Rather higher   with the new algo we had in short time NF20, no chance for your cards. I know these models, I had the same for yac and utc. But you can try NF18, what's your results?

[kiffner]

I am happy i didn't sold my rigs with r7 240....  

whats the plan for new NF? 14 like ultracoin?

Rather higher   with the new algo we had in short time NF20, no chance for your cards. I know these models, I had the same for yac and utc. But you can try NF18, what's your results?

NF20... then you must have some kind of super quantum cluster computer to even get one share a day  

I got 30h per card. tried only one 6 gpu rig. ethers are waiting in the basement... haha  

[MemberCount+1]

I am happy i didn't sold my rigs with r7 240....  

whats the plan for new NF? 14 like ultracoin?

Rather higher   with the new algo we had in short time NF20, no chance for your cards. I know these models, I had the same for yac and utc. But you can try NF18, what's your results?

NF20... then you must have some kind of super quantum cluster computer to even get one share a day  

I got 30h per card. tried only one 6 gpu rig. ethers are waiting in the basement... haha  

The Diff was the adjustment   the idea for the new algo is really clever. I think in the next Version we have a better implementation.

30h/s is for NF18 good, I had no more than 29  with These cards

[Smoker00]

cach.digger.work has been unavailable since the middle of this month. Scam?

They had problem with the pool,and we don't know when it will come back online,but at least they paid me(even if i could mine or connect to the server),so i won't call it a scam.

Owner diger.work in russian topic say:
He wait untill re-sync cryptopia, becose some miners have wallet in  cryptopia. And then he pay all CACH.

[jjiimm_64]

He wait untill re-sync cryptopia,

re-sync takes 12 hours roughly....  cryptopia has been at it for 4 days.. wonder what the problem is?

[MemberCount+1]

He wait untill re-sync cryptopia,

re-sync takes 12 hours roughly....  cryptopia has been at it for 4 days.. wonder what the problem is?

It's so simple ... the solutions were posted more than once. 

[aleksoo7]

Here is today's answer from Cryptopia:
Cache is in maintenance while we are attempting to resync it to the blockchain. As soon as this is complete the wallet will be brought back online. I said to them if they need any help - please contact me.
Also, I provided them a full list of nodes - https://www.coinexchange.io/network/peers/CACH

[teosanru]

Anyone know what is the hashrate for rx 480 amd and gtx 1080 TI? Or if they are using another gpu for the mining please inform the hashrate. Thank you

i think scrypt-jane only can be mined with cpu, gpu miner did not come yet..youcan wait untill gpu miner release.

You say that there is no GPU miner, but without in the first post of this thread there is one for amd, and nvidia, so I ask, what is the hashrate, also according to I understand the algorithm of this currency is scrypt-jane? Then why does it say that there is no GPU miner?

[humski]

guess I should have been more clear,

Can someone please post a link to a windows GPU miner that YOU are using to mine at the current cachecoin pool.

and also, if you dont mind, the config settings.  I am getting HW errors from my miner, even at low settings.

JIm

Nvidia

https://github.com/tpruvot/ccminer/releases
-a scrypt-jane:18 -o stratum+tcp://ikarus.ageleis.de:3003 -u you_wallet -p any

See this for GPU miner

[DarkSoc]

I tried the amd miner on a r9 390,it just crashes without  a reason.I also tried with stock settings,driver crash anyway,also tried with higher voltage,same problem.
I believe that miner won't work on windows 10/8.1.

[MemberCount+1]

I tried the amd miner on a r9 390,it just crashes without  a reason.I also tried with stock settings,driver crash anyway,also tried with higher voltage,same problem.
I believe that miner won't work on windows 10/8.1.

yes, Windows 7 and a older catalyst Version helps, but I don't know what it was. your address was Cfa3AM9Pots8sqtXWUwC83mNWKESk4foAf?   use a cpu miner!

But if someone need help for a gpu miner you can contact me (prefer in german)

[teosanru]

I tried the amd miner on a r9 390,it just crashes without  a reason.I also tried with stock settings,driver crash anyway,also tried with higher voltage,same problem.
I believe that miner won't work on windows 10/8.1.

yes, Windows 7 and a older catalyst Version helps, but I don't know what it was. your address was Cfa3AM9Pots8sqtXWUwC83mNWKESk4foAf?   use a cpu miner!

But if someone need help for a gpu miner you can contact me (prefer in german)

Hello I have 3 gpu amd r7 260x of 1GB ram, I also happen the same with the miner for amd the controller is blocked? With what solution can you help me?
Thank you. Do you say that an old driver should be installed? Which version should be installed?

My operating system is windows 7

I would greatly appreciate your help

[MemberCount+1]

I tried the amd miner on a r9 390,it just crashes without  a reason.I also tried with stock settings,driver crash anyway,also tried with higher voltage,same problem.
I believe that miner won't work on windows 10/8.1.

yes, Windows 7 and a older catalyst Version helps, but I don't know what it was. your address was Cfa3AM9Pots8sqtXWUwC83mNWKESk4foAf?   use a cpu miner!

But if someone need help for a gpu miner you can contact me (prefer in german)

Hello I have 3 gpu amd r7 260x of 1GB ram, I also happen the same with the miner for amd the controller is blocked? With what solution can you help me?
Thank you. Do you say that an old driver should be installed? Which version should be installed?

My operating system is windows 7

I would greatly appreciate your help

It's simple, your Cards do not work because the algo is too hard for These Cards, your Memory are too small! search for Cards with 4GB+ all other make no sense. the scrypt-jane algo Needs with high NF a lot of Memory per thread, therefore you Need a lot of ram on your graphic card

[teosanru]

I tried the amd miner on a r9 390,it just crashes without  a reason.I also tried with stock settings,driver crash anyway,also tried with higher voltage,same problem.
I believe that miner won't work on windows 10/8.1.

yes, Windows 7 and a older catalyst Version helps, but I don't know what it was. your address was Cfa3AM9Pots8sqtXWUwC83mNWKESk4foAf?   use a cpu miner!

But if someone need help for a gpu miner you can contact me (prefer in german)

Hello I have 3 gpu amd r7 260x of 1GB ram, I also happen the same with the miner for amd the controller is blocked? With what solution can you help me?
Thank you. Do you say that an old driver should be installed? Which version should be installed?

My operating system is windows 7

I would greatly appreciate your help

It's simple, your Cards do not work because the algo is too hard for These Cards, your Memory are too small! search for Cards with 4GB+ all other make no sense. the scrypt-jane algo Needs with high NF a lot of Memory per thread, therefore you Need a lot of ram on your graphic card

What performance in hashrate would have a rx 480 of 4GB Or a gtx 1060 of 3 gb??

[MemberCount+1]

I tried the amd miner on a r9 390,it just crashes without  a reason.I also tried with stock settings,driver crash anyway,also tried with higher voltage,same problem.
I believe that miner won't work on windows 10/8.1.

yes, Windows 7 and a older catalyst Version helps, but I don't know what it was. your address was Cfa3AM9Pots8sqtXWUwC83mNWKESk4foAf?   use a cpu miner!

But if someone need help for a gpu miner you can contact me (prefer in german)

Hello I have 3 gpu amd r7 260x of 1GB ram, I also happen the same with the miner for amd the controller is blocked? With what solution can you help me?
Thank you. Do you say that an old driver should be installed? Which version should be installed?

My operating system is windows 7

I would greatly appreciate your help

It's simple, your Cards do not work because the algo is too hard for These Cards, your Memory are too small! search for Cards with 4GB+ all other make no sense. the scrypt-jane algo Needs with high NF a lot of Memory per thread, therefore you Need a lot of ram on your graphic card

What performance in hashrate would have a rx 480 of 4GB?

I think a Little bit more than 30H/s but not more than 40H/s (speculation)

[freebitcoins4u]

is it still a pos coin? i searched here and also the website and no one mentioned what is the the yearly interest rate.