RX 560 4GB Ethereum

[Munhenhos]

Epoch #22? When was that, 2 years ago?

It is EXP.

I made test on ETH especially for you))  on Epoch #132

That's on 460 or 560? Because i've 10 rx 460 and +3MH/s per card would be awesome
Can you pm the stats you used plus bios?

[BradP560]

thanks to @priviet for sharing his bios mod

WORK on Shappire RX 560 4gb itx non OC without 6 pin connector, i get 14.2xx mh/s per card with 60w power draw and about 65° with 70% fan speed.

Hi Brad,

Can you please share how many RX560 Sapphire you have and what AMD driver you use ? As I tried @privet mod and it's all fine, getting nice MH/s, but after 2-3 mins the miner crash with error GPU# hangs in  OpenCL call exit.

I'm suspecting some motherboard issue, as the 2 PCIx16 slots are behaving very strange. When all 6 cards are connected the PC is really unresponsive, when I remove 2 of the cards which are connected to the PCIx16 the things are much better, anyway I have to test what's wrong there, but curious about how many cards you have running with the bios and for how long + what driver you use ?

Thanks in advance.

I have 6 cards running on a Asus z270-P with driver version 17.5.2 from about 4 days, stable

Hey ! May I ask you where you managed to find cards at this price ?

Thanks !

www.eprice.it  i bought at 130€ per card

[Branko]

I modded the bios successfully and increased the mining speed to ~14.xxx mh/s with the following settings:

bios mod:

1750 timings -> 1875, 2000
max memory clock 2000 -> 2200

amd radeon settings:

gpu clock -> 1125 (underclock)
memory clock -> 2000
fan -> 100%

ASIC is 65% and 75% so they run 60° and 53°. Memory is Micron 4GB.
Could push the memory clock further now but I'm satisfied and let them work for 48h.

I think they could do 15.xxx mh/s but with much more power draw and heat dissipation.

And disable crossfire in amd tool, enabled by default!

Hi, thank you for your hints.
I have some problems trying to flash my bios:
- I back up my original BIOS using AtiWinFlash v.2.74
- I modify the bios putting the new values using PolariBiosEditor Master 1.4
- I save the new BIOS into a new file
- I put the new BIOS on the RX 560 using AtiWinFlash v.2.74 again

But....
whatever I try to change in the BIOS, after the reboot, the ATI driver stops to recognise the ATI card...
WHERE AM I WRONG ?

maybe is it a checksum problem (this may be the reason why the driver doesn't see the card anymore)

Thank you in advance

I think its answered few hundred times on this board alone...you have to patch your video drivers
to recognize your card with modified BIOS

Edit: you can download patcher here:

https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

[votsirh]

thanks to @priviet for sharing his bios mod

WORK on Shappire RX 560 4gb itx non OC without 6 pin connector, i get 14.2xx mh/s per card with 60w power draw and about 65° with 70% fan speed.

Hi Brad,

Can you please share how many RX560 Sapphire you have and what AMD driver you use ? As I tried @privet mod and it's all fine, getting nice MH/s, but after 2-3 mins the miner crash with error GPU# hangs in  OpenCL call exit.

I'm suspecting some motherboard issue, as the 2 PCIx16 slots are behaving very strange. When all 6 cards are connected the PC is really unresponsive, when I remove 2 of the cards which are connected to the PCIx16 the things are much better, anyway I have to test what's wrong there, but curious about how many cards you have running with the bios and for how long + what driver you use ?

Thanks in advance.

I have 6 cards running on a Asus z270-P with driver version 17.5.2 from about 4 days, stable

Hey ! May I ask you where you managed to find cards at this price ?

Thanks !

www.eprice.it  i bought at 130€ per card

Hey brad,

Can you share what PSU you use and how many WATTS it is ?

Cheers

[votsirh]

Hello,

I use polaris bios editor for my 560, there is an error message but it work, i d'ont now how to post the bios mod but i can send it by mail.

Hi cchouse, I sent you personal message with my e-mail to share the bios if you can. If you cannot upload it public ally I'll it if you send me the bios.

Thanks mate

[jcreyesb]

hi guys, i have two RX 560 one Sapphire  pulse Overclock  and MSI aero ITX, i read all post here but never has read wich GPU model you can make bios mod. Can you help me ?

[Branko]

hi guys, i have two RX 560 one Sapphire  pulse Overclock  and MSI aero ITX, i read all post here but never has read wich GPU model you can make bios mod. Can you help me ?

All of them

[chohav]

What are you hashes guys? Anyone managed speeds over 14mh ?

[votsirh]

What are you hashes guys? Anyone managed speeds over 14mh ?

Several did, according to their posts Some of us are near 14mh. For me 14.5 - 15 MH/s are not doing well on more than 2 cards rig. If the modded bios is on all 6 cards the miner crashes after few mins, but yeah the total hashing power per card is over 14.5, but not stable.

[Abricotier]

What are you hashes guys? Anyone managed speeds over 14mh ?

Several did, according to their posts Some of us are near 14mh. For me 14.5 - 15 MH/s are not doing well on more than 2 cards rig. If the modded bios is on all 6 cards the miner crashes after few mins, but yeah the total hashing power per card is over 14.5, but not stable.

Wow ! 14 MH/s is an awesome performance ! And in case it is not stable at around 14 MH/s, downgrading to 13 MH/s would still be something great. You are now making me considering buying one !

[bagata]

With overpriced 570s and 580s i think that 560 is better choice

[SDRebel]

With overpriced 570s and 580s i think that 560 is better choice

I'm seeing the RX560 at much less than half the price of the GTX 1070 for example (I can't find RX 570, so can't even compare to that)

[jcreyesb]

hi guys, i have two RX 560 one Sapphire  pulse Overclock  and MSI aero ITX, i read all post here but never has read wich GPU model you can make bios mod. Can you help me ?

All of them

Ok, but i tried use priviet's rom, but not work for me, what i could change? i will try my own rom

[votsirh]

What are you hashes guys? Anyone managed speeds over 14mh ?

Several did, according to their posts Some of us are near 14mh. For me 14.5 - 15 MH/s are not doing well on more than 2 cards rig. If the modded bios is on all 6 cards the miner crashes after few mins, but yeah the total hashing power per card is over 14.5, but not stable.

Wow ! 14 MH/s is an awesome performance ! And in case it is not stable at around 14 MH/s, downgrading to 13 MH/s would still be something great. You are now making me considering buying one !

13,5 is easily achieved with some of the bios mods posted here, for which I thanks the guys who shared their work.

[votsirh]

hi guys, i have two RX 560 one Sapphire  pulse Overclock  and MSI aero ITX, i read all post here but never has read wich GPU model you can make bios mod. Can you help me ?

All of them

Ok, but i tried use priviet's rom, but not work for me, what i could change? i will try my own rom

privet ROM is for Sapphire only, but indeed, after applying it, i got 14,5 per card, but this lasted only several minutes. Obviously either i'm doing something wrong or my PSU cannot handle the load. Anyway after privet's post there's another ROM shared, which is stable at 13,5, so you can try with it.

[votsirh]

So if there's anyone with MSI RX 560 AERO ITX OC, who managed to get past 13+ mh/s with custom bios ? If so, is it possible to share ROM or settings on how you did it

Cheers

[Branko]

Even among same manufacturer and model, ROMs could not be compatible..in my case,

I have four Gigabyte RX560s, but two are Hynix and two are Micron memory, totally

different timings and bios is not interchangeable...so if you dont know what to do,

extract your BIOS and post it here so someone can eventually check for you

[votsirh]

You're right, but I've noticed something strange with my other rig running on Sapphire rx560. When I'm replacing the bios with the ones downloaded from here, it gives different information about the bios (I'm using atiflash with CMD, where full BIOS info is visible). When I replace the original BIOS with such made by me (basically extracted the default bios ,made some mods and flash it back), the information about new and old bios is the very same, so you're right, there's difference among the same vendors, but for me, it worked. My modded bios is crappy, nothing happens when tweeking with AfterBurn and with the ones from here I got good hashing rate. Have to note that the uploaded bioses by privet are with already clocked memory and core.

Back to the MSI topic.

Here's the original ROM: http://s000.tinyupload.com/?file_id=91214473661273445192

Here's my modded ROM, which is doing about 12 (dual mining):  http://s000.tinyupload.com/?file_id=00070263020219795327

If there's some who could mod the original, I would be very happy or share its modded bios for MSI. I see @cchouse did a good job, but he's no longer active

[Danesz10]

Hi all!

I a newbie on this mining topics.
I bought 6pcs of Sapphire RX 560 4GB. With my friends we built up the rig.
We used Asus H270F motherboard we used 2pc of psu.

The windows find the 6 cards but after I start claymore one GPU hashing only 2.095 mh/s the others reach 12 or above. We tested the risers the cards the cables, we switching the parts everything! But the problem is always the same.

Have you got any idea what's wrong?


Can you tell me how can dual mining? If I use this in dual, the ETH hashrate will go down? How %?

Thank you!

[votsirh]

Hi and welcome,

I see you're using claymore, so just open the RadeMe file to understand how to mine on dual. As for the low MH/s on one card, if it's still the same after reboot, try putting the DVI/HDMI cable to that card and removed. Should fix it.

Cheers