oldLEo
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 14, 2017, 07:42:02 AM Last edit: July 14, 2017, 07:53:29 AM by oldLEo |
|
Hi everyone I bought 3 Sapphire RX560 Pulse OC boards, I only managed in one of them to work 100% to bios @Priviet the other 2 Sapphire RX560 Pulse OC none of the available bios @newsector and @Priviet give color screen after a few minutes. RX560 Pulse OC 6 pin standard is almost 12mh/s I do not understand, the boards are the identical why only in one of them took round for days to almost 15mh/s @Priviet and the others give the color screen. I was looking to buy other RX560 Pulse OC 6 pin but now I do not know what I do. Are you sure all 3 use same memory? According to GPU-Z Memory Type (Micron) of the 3 only 1 of them I can use memory clock in 2140MHz Status https://prnt.sc/fvj833 The three are Micron type. Strange that in the other 2 if I put of 1750MHz for 2000 or until 1850MHz in 10 minutes it locks the screen turns black sometimes it stays of another colors. The 3 pieces came together sealed and new, strange the other 2 just pick up with the original Bios or by being at 1750MHz.
|
|
|
|
votsirh
Newbie
Offline
Activity: 36
Merit: 0
|
|
July 14, 2017, 12:08:37 PM |
|
Hi everyone I bought 3 Sapphire RX560 Pulse OC boards, I only managed in one of them to work 100% to bios @Priviet the other 2 Sapphire RX560 Pulse OC none of the available bios @newsector and @Priviet give color screen after a few minutes. RX560 Pulse OC 6 pin standard is almost 12mh/s I do not understand, the boards are the identical why only in one of them took round for days to almost 15mh/s @Priviet and the others give the color screen. I was looking to buy other RX560 Pulse OC 6 pin but now I do not know what I do. Are you sure all 3 use same memory? According to GPU-Z Memory Type (Micron) of the 3 only 1 of them I can use memory clock in 2140MHz Status https://prnt.sc/fvj833 The three are Micron type. Strange that in the other 2 if I put of 1750MHz for 2000 or until 1850MHz in 10 minutes it locks the screen turns black sometimes it stays of another colors. The 3 pieces came together sealed and new, strange the other 2 just pick up with the original Bios or by being at 1750MHz. How do you flash the bios ? provide the used command
|
|
|
|
priviet
Newbie
Offline
Activity: 26
Merit: 0
|
|
July 14, 2017, 01:26:04 PM |
|
reinstall pixel patcher after inserting second card, original driver seems to reinstall after card modification
nothing, so frustrating :// "Radeon Settings are currently not available. Please try again after connecting a display to AMD graphics and extending the display. " try to connect a display to the cards, at least one display or dummy hdmi plug.
|
|
|
|
oldLEo
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 14, 2017, 05:21:34 PM |
|
Hi everyone I bought 3 Sapphire RX560 Pulse OC boards, I only managed in one of them to work 100% to bios @Priviet the other 2 Sapphire RX560 Pulse OC none of the available bios @newsector and @Priviet give color screen after a few minutes. RX560 Pulse OC 6 pin standard is almost 12mh/s I do not understand, the boards are the identical why only in one of them took round for days to almost 15mh/s @Priviet and the others give the color screen. I was looking to buy other RX560 Pulse OC 6 pin but now I do not know what I do. Are you sure all 3 use same memory? According to GPU-Z Memory Type (Micron) of the 3 only 1 of them I can use memory clock in 2140MHz Status https://prnt.sc/fvj833 The three are Micron type. Strange that in the other 2 if I put of 1750MHz for 2000 or until 1850MHz in 10 minutes it locks the screen turns black sometimes it stays of another colors. The 3 pieces came together sealed and new, strange the other 2 just pick up with the original Bios or by being at 1750MHz. How do you flash the bios ? provide the used command I record the normal flash I believe https://prnt.sc/fvqdo1or 1. cmd as administrator ---> cd C:\atiflash_274 2. atiwinflash -unlockrom 1 3. atiwinflash -p -f 1 bios2200max-2100def-1750atallabove.rom (0 for first and 1 for second)
|
|
|
|
Branko
|
|
July 14, 2017, 05:32:27 PM |
|
I record the normal flash I believe https://prnt.sc/fvqdo1or 1. cmd as administrator ---> cd C:\atiflash_274 2. atiwinflash -unlockrom 1 3. atiwinflash -p -f 1 bios2200max-2100def-1750atallabove.rom (0 for first and 1 for second) If what file name suggest is true (2100 default for mem) , then maybe you're actually lucky... I have two micron based ones and with 1750 strap both top at 2050MHz
|
|
|
|
iam1000fold
Newbie
Offline
Activity: 8
Merit: 0
|
|
July 15, 2017, 05:01:39 AM |
|
hi guys! anyone tried priviet's mod bios with a hynix memory?...i got HIS RX560 4GB OC card...and its running only in stock 10Mh/s... and also everything is disabled when i used afterburner... please help me on this...thanks a lot Change the AB version, worked for me. As for the bios, I tried Micron bios on Hynix and didn't end well. thanks for the reply...i'm using AB v.4.3.0.9267...may i know what version are you using? thanks
|
|
|
|
IronFists
Newbie
Offline
Activity: 57
Merit: 0
|
|
July 15, 2017, 09:40:06 AM |
|
Micron. But the bios have Micron hynix support.
Tried on MSI RX 560 4g, but it doesn't work. The MSI is with Hynix. Cheers Thank you for trying the bios on a Hynix. Sorry it did not work. It will work for Micron though.,
|
|
|
|
carlo_0000
Legendary
Offline
Activity: 1281
Merit: 1003
|
|
July 15, 2017, 11:00:27 AM |
|
Anybody got a benchmark on equihash?
yes i have one sapphire rx560 2G it does 134mh (not so bad some less than an half rx470) someone here if i remember in begin of topic posted his speed with an 4G at less than 90 if i remember, i don't know why his one is so low where the rx560 does good score it s on skein it does 134mh because of high clock it s actually very close to the r9 270 144mh stock (with 150w vs 75?/85?w)
|
|
|
|
noreit
Newbie
Offline
Activity: 30
Merit: 0
|
|
July 15, 2017, 12:00:41 PM Last edit: July 15, 2017, 12:54:10 PM by noreit |
|
Hi all, finally I got my 2x RX 560 Sapphire pulse OC. I tried get a little extra from them as default was about 11,5Mh/s. I tried both bioses from page4 and ended up with edited newsector bios. BIOS delivers like 13,4 Mh/s and I edited it from timings 1766 1050 core 2000 memory to 1625 timings 1050 core 2000 memory to get 13,7Mh/s. Not able to get more (I didnt changed voltage for memory though). Anyway, this setting have only 35-40W per card, which is honestly awesome.
I also tried priviet bios, but had only like 12,8MH/s which is quite strange.
I am thinking about dual mining, I know 2 cards are like nothing, I am just curious.
NoreiT
|
|
|
|
Branko
|
|
July 15, 2017, 02:57:34 PM |
|
Everyone praises hynix memory over Micron, but while my Micron works at 2050MHz with 1625MHz straps, best I managed with Hynix is 2000 with 1750 straps...of course, if someone knows how to change every single memory timing instead just copy/paste them, maybe that paints different picture
|
|
|
|
|
se32786
|
|
July 15, 2017, 06:57:35 PM |
|
I was the one that requested this. I purchased his rom everyone. I am waiting for him to send it... Once I get it (assuming he sends it), I will report here the validity of his rom. Wish me luck
|
Bitrated user: se32786.
|
|
|
mozuhin
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 15, 2017, 08:05:52 PM |
|
good luck, man! and I hope you really have an entire farm of rx560, because it's probably not worth it otherwise :// as for me, I finally managed to get all the 6 GPUs to work together... 13,8 MH/s is the best I can get for now in a completely stabile system, using priviet bios (THANKS, priviet!!!) and 1100MHz GPU clock + 2040MHz memory clock set in MSI Afterburn i managed to go over 14, but i'm gonna let it run like this for a while before i do some additional tweeking best,
|
|
|
|
bumblebee24
Full Member
Offline
Activity: 154
Merit: 100
www.valuebetting.org
|
|
July 15, 2017, 08:19:14 PM |
|
I was the one that requested this. I purchased his rom everyone. I am waiting for him to send it... Once I get it (assuming he sends it), I will report here the validity of his rom. Wish me luck Wish you luck man, hope he hold his end of the bargain. Even more I hope you're able to replicate his results and that's quite a gamble price wise by you.
|
|
|
|
se32786
|
|
July 15, 2017, 08:38:26 PM |
|
I was the one that requested this. I purchased his rom everyone. I am waiting for him to send it... Once I get it (assuming he sends it), I will report here the validity of his rom. Wish me luck OKAY! So, first and foremost bios and oc settings were delivered as promised. - The bios is legit. - There are tweaks in the bios that opened my eyes as to HOW it is done. It's not just a copy paste job. - The straps appear to be pretty custom. - Performance yields are different for different card manufacturers. My XFX cards are unable to push to the exact OC settings the Sapphire card is able to, thus yielding not QUITE as good results. 14.5MH stable @ 52 watts. I have only tried 1 of my 5x XFX 560's I am going to try flashing some other's as I noticed some of them were able to hit higher OC settings more stable, which I then believe I will see the 16MH desired. I DO BELIEVE THE SAPPHIRE CARD WILL GET 15-16MH WITH THIS MOD. THAT CARD IS PROVEN TO HIT HIGHER MEMORY OVERCLOCKS THAT MY XFX DOES NOT SEEM TO BE ABLE TO HIT.All in all, I am happy. Yes I overpaid out the a$$, I know this. But, if this works out, I plan to get a return on that investment I have offered my advice to him to drop the price to 0.3 eth for future customers. I believe this mod IS TRULY WORTH THAT PRICE, and everyone here should purchase it, if that price can be had. If not, it still may be worth it, that's up to you and how many 560's you actually have. Thanks BradP560 for the bios!
|
Bitrated user: se32786.
|
|
|
justchil
Member
Offline
Activity: 92
Merit: 10
|
|
July 15, 2017, 09:08:04 PM |
|
I would buy @ the $50 range. I am doing a rig or two of 560's for fun.
|
|
|
|
votsirh
Newbie
Offline
Activity: 36
Merit: 0
|
|
July 15, 2017, 09:15:37 PM |
|
No need for video to trust you, I just need a bit lower price btw. Do you think you could do Hynix mod for MSI rx560, as the best I got is 13.1-2. If you could lower the price for the Sapphire, we have a deal
|
|
|
|
bumblebee24
Full Member
Offline
Activity: 154
Merit: 100
www.valuebetting.org
|
|
July 15, 2017, 10:23:57 PM |
|
No need for video to trust you, I just need a bit lower price btw. Do you think you could do Hynix mod for MSI rx560, as the best I got is 13.1-2. If you could lower the price for the Sapphire, we have a deal If you don't mind me asking; Where did you find mod for MSI rx560 Hynix in order to get 13.1-2, or did you mess around with settings yourself?
|
|
|
|
arch365
|
|
July 16, 2017, 01:02:54 AM |
|
I modded the bios successfully and increased the mining speed to ~14.xxx mh/s with the following settings:
bios mod:
1500 timings -> 1625, 2000
amd radeon settings:
gpu clock -> 1050 (underclock) memory clock -> 2000 fan -> 67%
14,3 MH
|
|
|
|
votsirh
Newbie
Offline
Activity: 36
Merit: 0
|
|
July 16, 2017, 01:19:41 AM |
|
I modded the bios successfully and increased the mining speed to ~14.xxx mh/s with the following settings:
bios mod:
1500 timings -> 1625, 2000
amd radeon settings:
gpu clock -> 1050 (underclock) memory clock -> 2000 fan -> 67%
14,3 MH
What card and memory ?
|
|
|
|
|