RX 560 4GB Ethereum

[htmlist]

How much hashrate 560 on etherium, equihash, pascal, x11gost, cryptonight, lbry?

Need it for my bot https://bitcointalk.org/index.php?topic=1775770.new#new

[SummersideGuy]

Hey everyone I am just getting back into mining and thought I would try out Ethereum, Zcash and dual mining. I know it is a little late in the game and I missed the big rush but I am ok with that. What I was wondering is this,I ordered some Asus Republic Of Gamers Strix RX560 4GB cards for $158cdn(about $120usd) before tax each. and with all the ups and downs for GPU prices which I have not been keeping track of I was wondering is this was a decent price or did I over pay. I was also wondering  if I could expect after mods to get similar hashrates other miners are reporting with other 560 cards of 13.5-14.5 on Ethereum and if anyone has any idea what the hashrate would be for mining DCR if I were to dual mine. I have some 1060's coming in also but those were $290cdn(225usd) before taxes so nearly double the price of the 560's.

[Libra44]

For the first time I have tried with original bios and it is not working with 6 cards !!!

Magic

[Crate Mayne]

Howdy all,

Anyone able to get their MSI RX 560 AERO ITX OC 4GB (Hynix memory, and without the 6 pin) working decent yet with a bios tweak? Saw a few posts relating to it, but the various shared bios didn't seem to do any good for me

I had bought the card extra cheap for one last small bump to my already in place hobby set-up (instead of buying a card at still over-inflated prices), but it only gives "really small bump" at the moment haha.

I get about ~10.6 Mh/s stock, and about the same dual mining SIA with a -dcri 15 (above -15 is where it'll start to stray below the 10.6Mh). OC seems to do pretty much nothing to tilt the #s more favorably.

Thanks for any potential insights!

[erzhan89]

Hello folks,
Expanse mining. RX560 4GB Micron. As you see there, Time of work is more than 1 week without reboot.  It works very stable!


Now, price is 1 ETC.

https://i.imgur.com/EKOEPT9.png

https://i.imgur.com/EKOEPT9.png
email me: erzhan89@gmail.com

[Joker_SK]

Howdy all,

Anyone able to get their MSI RX 560 AERO ITX OC 4GB (Hynix memory, and without the 6 pin) working decent yet with a bios tweak? Saw a few posts relating to it, but the various shared bios didn't seem to do any good for me

I had bought the card extra cheap for one last small bump to my already in place hobby set-up (instead of buying a card at still over-inflated prices), but it only gives "really small bump" at the moment haha.

I get about ~10.6 Mh/s stock, and about the same dual mining SIA with a -dcri 15 (above -15 is where it'll start to stray below the 10.6Mh). OC seems to do pretty much nothing to tilt the #s more favorably.

Thanks for any potential insights!

hello, i have same problem, i got the MSI RX560 OC, but the dual fan, with power plug, but the hashrate is really low, like 10.4mh/s
my Strix RX460 is doing almost 12mh/s stock
maybe the memory timings are too much relaxed on the MSI. have you ried bios mod?

[noreit]

Howdy all,

Anyone able to get their MSI RX 560 AERO ITX OC 4GB (Hynix memory, and without the 6 pin) working decent yet with a bios tweak? Saw a few posts relating to it, but the various shared bios didn't seem to do any good for me

I had bought the card extra cheap for one last small bump to my already in place hobby set-up (instead of buying a card at still over-inflated prices), but it only gives "really small bump" at the moment haha.

I get about ~10.6 Mh/s stock, and about the same dual mining SIA with a -dcri 15 (above -15 is where it'll start to stray below the 10.6Mh). OC seems to do pretty much nothing to tilt the #s more favorably.

Thanks for any potential insights!

Did you tried edit BIOS yourself? For me its the best you can do, edit original bios from card. If you want to hel with it, just PM me.

[Joker_SK]

I have spent 2hours yesterday with them. memory strap from 1650 to everything up, and mem speed at 1950 (2000mhz was not stable, didn't want to push more volts) i got 12, 13.4 and 13.2 from my 3 cards, with 1100 core clock.

[Branko]

I put my BIOS for cards with Micron memory here:

https://anorak.tech/t/rx-560-4gb-on-eth/7493/136?u=branko

[matheuszr]

Hi guys, im reporting a little late, but i've been arround since the start of the thread(just created acc now, sorry).
I've managed to get 13,5 mh/s with bios mod on gigabyte rx 560 oc gaming 4gb, memory is micron.

Timings 1500 -> 1500 - 2000
Underclocked to 1050 mhz, memory is at 1850 mhz (i was able to get 2000 but wasnt stable at all, gonna try 1850+ with increments of 20-25mhz to see what happens)

I use 3 cards direct to MB and 1 riser, fans are at 45% in 2 of them(riser and bottom pci-e slot) 55% in the middle one and 50% upper pci-e, temps never get above 70~72ºc even in +32ºc ambient temp.

But the most incledible thing is thats only DRAWING 27~28W PER CARD, idk how tho lol.

Calculating this, it gives me an almost equal performance of 15 mh/s drawing 50-53w.

What you guys think?

[votsirh]

Hi guys, im reporting a little late, but i've been arround since the start of the thread(just created acc now, sorry).
I've managed to get 13,5 mh/s with bios mod on gigabyte rx 560 oc gaming 4gb, memory is micron.

Timings 1500 -> 1500 - 2000
Underclocked to 1050 mhz, memory is at 1850 mhz (i was able to get 2000 but wasnt stable at all, gonna try 1850+ with increments of 20-25mhz to see what happens)

I use 3 cards direct to MB and 1 riser, fans are at 45% in 2 of them(riser and bottom pci-e slot) 55% in the middle one and 50% upper pci-e, temps never get above 70~72ºc even in +32ºc ambient temp.

But the most incledible thing is thats only DRAWING 27~28W PER CARD, idk how tho lol.

Calculating this, it gives me an almost equal performance of 15 mh/s drawing 50-53w.

What you guys think?

How do you measure the watt drawing ? Note that most of the softwares are not that accurate. The best would be wattmetter on the wall

[matheuszr]

Hi guys, im reporting a little late, but i've been arround since the start of the thread(just created acc now, sorry).
I've managed to get 13,5 mh/s with bios mod on gigabyte rx 560 oc gaming 4gb, memory is micron.

Timings 1500 -> 1500 - 2000
Underclocked to 1050 mhz, memory is at 1850 mhz (i was able to get 2000 but wasnt stable at all, gonna try 1850+ with increments of 20-25mhz to see what happens)

I use 3 cards direct to MB and 1 riser, fans are at 45% in 2 of them(riser and bottom pci-e slot) 55% in the middle one and 50% upper pci-e, temps never get above 70~72ºc even in +32ºc ambient temp.

But the most incledible thing is thats only DRAWING 27~28W PER CARD, idk how tho lol.

Calculating this, it gives me an almost equal performance of 15 mh/s drawing 50-53w.

What you guys think?

How do you measure the watt drawing ? Note that most of the softwares are not that accurate. The best would be wattmetter on the wall

Just with softwares, i'm gonna try to get a wattmetter to see if its really true, i'm not believing either

[Branko]

Just with softwares, i'm gonna try to get a wattmetter to see if its really true, i'm not believing either

Not true, in HWInfo program it reports for me 32W, but in reality its more like 90W (thats in reality 72W for
the card itself, and 18W lost in power supply if you have 80% efficient power supply)

[SummersideGuy]

I picked up a Sapphire 570 Pulse Mini Itx model recently to try out Eth and dual mining, after watching a few videos and reading up I am managing 28.3mh/s Eth  and 679mh/s Decr steady on the card, My GPU only power draw according to GPU-Z fluctuates between 125 -134w. I am not sure if this is good/bad/ or about average. I would like to know if it is possible to squeeze more out of the card, but to do that I think it would require custom memory straps/timings am I correct in assuming this.

[iam1000fold]

Hi guys! I'm just new in crypto mining and started with a 4-GPU set for my rig. I don't have anything to pay you in exchange for a little help or reply but maybe somehow someone could share their knowledge concerning my setup, and it would be greatly appreciated.

My gpu is a HIS RX560 (Hynix) 4GB OC. I already tried to mod it one by one by copying the 1:1750 timing to 1:1875 to 2000 and 2:1750 all the way to 2:2200 and overclocked it core: 1250 and memory:2000 with +10 power. I managed to get 11.2mH/s in ETH claymore mining. I also tried other settings but that's the best i could get.

Here's my problem:
1.) whenever i plug-in the hdmi connector to the built-in (on-board) gpu...my mod setting in afterburner will not worked...everything is just 0...you cannot change the core, mem...everything...but all my 4 gpus were detected and it runs in its stock hashrate of 10mH.

2.)afterburner will only work if i connect the hdmi to one of the 4 gpu and then i could change the settings but only one gpu will only change in terms of hashrate, wherein i could get around 11.2mH while the other 3 gpu runs in its stock hashrate of 10mH.

any advice? what's wrong with my setup/mod? please could someone help me on this.

i will be posting my moddedROM if someone would like to test it.

thanks in advance!

[SummersideGuy]

Hi guys! I'm just new in crypto mining and started with a 4-GPU set for my rig. I don't have anything to pay you in exchange for a little help or reply but maybe somehow someone could share their knowledge concerning my setup, and it would be greatly appreciated.

My gpu is a HIS RX560 (Hynix) 4GB OC. I already tried to mod it one by one by copying the 1:1750 timing to 1:1875 to 2000 and 2:1750 all the way to 2:2200 and overclocked it core: 1250 and memory:2000 with +10 power. I managed to get 11.2mH/s in ETH claymore mining. I also tried other settings but that's the best i could get.

Here's my problem:
1.) whenever i plug-in the hdmi connector to the built-in (on-board) gpu...my mod setting in afterburner will not worked...everything is just 0...you cannot change the core, mem...everything...but all my 4 gpus were detected and it runs in its stock hashrate of 10mH.

2.)afterburner will only work if i connect the hdmi to one of the 4 gpu and then i could change the settings but only one gpu will only change in terms of hashrate, wherein i could get around 11.2mH while the other 3 gpu runs in its stock hashrate of 10mH.

any advice? what's wrong with my setup/mod? please could someone help me on this.

i will be posting my moddedROM if someone would like to test it.

thanks in advance!

Did you run atikmdag-patcher-1.4.5 after you modded your bios. Also your card have Hyniz so you should use 1:1500 and 2:1500.      I have only played around with a 570 so far but it has Hynix 4GB same as yoru 560's and I have it to 28.3 vs 22 it was at stock. I have some 560s coming in next week so will know better then about those

[iam1000fold]

Hi guys! I'm just new in crypto mining and started with a 4-GPU set for my rig. I don't have anything to pay you in exchange for a little help or reply but maybe somehow someone could share their knowledge concerning my setup, and it would be greatly appreciated.

My gpu is a HIS RX560 (Hynix) 4GB OC. I already tried to mod it one by one by copying the 1:1750 timing to 1:1875 to 2000 and 2:1750 all the way to 2:2200 and overclocked it core: 1250 and memory:2000 with +10 power. I managed to get 11.2mH/s in ETH claymore mining. I also tried other settings but that's the best i could get.

Here's my problem:
1.) whenever i plug-in the hdmi connector to the built-in (on-board) gpu...my mod setting in afterburner will not worked...everything is just 0...you cannot change the core, mem...everything...but all my 4 gpus were detected and it runs in its stock hashrate of 10mH.

2.)afterburner will only work if i connect the hdmi to one of the 4 gpu and then i could change the settings but only one gpu will only change in terms of hashrate, wherein i could get around 11.2mH while the other 3 gpu runs in its stock hashrate of 10mH.

any advice? what's wrong with my setup/mod? please could someone help me on this.

i will be posting my moddedROM if someone would like to test it.

thanks in advance!

Did you run atikmdag-patcher-1.4.5 after you modded your bios. Also your card have Hyniz so you should use 1:1500 and 2:1500.      I have only played around with a 570 so far but it has Hynix 4GB same as yoru 560's and I have it to 28.3 vs 22 it was at stock. I have some 560s coming in next week so will know better then about those

thanks for the quick reply SummersideGuy...yeah i did run the patcher once...it worked only for one gpu...the one connected to the hdmi where i manage to get 11mH...and i tried to do it again but it just ask me to revert to the default driver/setting...

[SummersideGuy]

Hi guys! I'm just new in crypto mining and started with a 4-GPU set for my rig. I don't have anything to pay you in exchange for a little help or reply but maybe somehow someone could share their knowledge concerning my setup, and it would be greatly appreciated.

My gpu is a HIS RX560 (Hynix) 4GB OC. I already tried to mod it one by one by copying the 1:1750 timing to 1:1875 to 2000 and 2:1750 all the way to 2:2200 and overclocked it core: 1250 and memory:2000 with +10 power. I managed to get 11.2mH/s in ETH claymore mining. I also tried other settings but that's the best i could get.

Here's my problem:
1.) whenever i plug-in the hdmi connector to the built-in (on-board) gpu...my mod setting in afterburner will not worked...everything is just 0...you cannot change the core, mem...everything...but all my 4 gpus were detected and it runs in its stock hashrate of 10mH.

2.)afterburner will only work if i connect the hdmi to one of the 4 gpu and then i could change the settings but only one gpu will only change in terms of hashrate, wherein i could get around 11.2mH while the other 3 gpu runs in its stock hashrate of 10mH.

any advice? what's wrong with my setup/mod? please could someone help me on this.

i will be posting my moddedROM if someone would like to test it.

thanks in advance!

Did you run atikmdag-patcher-1.4.5 after you modded your bios. Also your card have Hyniz so you should use 1:1500 and 2:1500.      I have only played around with a 570 so far but it has Hynix 4GB same as yoru 560's and I have it to 28.3 vs 22 it was at stock. I have some 560s coming in next week so will know better then about those

thanks for the quick reply SummersideGuy...yeah i did run the patcher once...it worked only for one gpu...the one connected to the hdmi where i manage to get 11mH...and i tried to do it again but it just ask me to revert to the default driver/setting...

I will know more once my 4 560s come in and I can experiment with them to see what you are experiencing. The 570 I have now is not hooked t my Monitor and it was the normal routine - Backup bios. modify bios, reboot, run patcher, reboot, good to go. I know from everything I read for Hynix to use line 1500 in your timings. It pushed my 570 up pretty high. I am hoping to get 14+ with the 560s when they get here. Not sure what memory they will have the are Asus Rog Strix models 4GB models. Once I have them and play around i will be able to assist you better

[iam1000fold]

Hi guys! I'm just new in crypto mining and started with a 4-GPU set for my rig. I don't have anything to pay you in exchange for a little help or reply but maybe somehow someone could share their knowledge concerning my setup, and it would be greatly appreciated.

My gpu is a HIS RX560 (Hynix) 4GB OC. I already tried to mod it one by one by copying the 1:1750 timing to 1:1875 to 2000 and 2:1750 all the way to 2:2200 and overclocked it core: 1250 and memory:2000 with +10 power. I managed to get 11.2mH/s in ETH claymore mining. I also tried other settings but that's the best i could get.

Here's my problem:
1.) whenever i plug-in the hdmi connector to the built-in (on-board) gpu...my mod setting in afterburner will not worked...everything is just 0...you cannot change the core, mem...everything...but all my 4 gpus were detected and it runs in its stock hashrate of 10mH.

2.)afterburner will only work if i connect the hdmi to one of the 4 gpu and then i could change the settings but only one gpu will only change in terms of hashrate, wherein i could get around 11.2mH while the other 3 gpu runs in its stock hashrate of 10mH.

any advice? what's wrong with my setup/mod? please could someone help me on this.

i will be posting my moddedROM if someone would like to test it.

thanks in advance!

Did you run atikmdag-patcher-1.4.5 after you modded your bios. Also your card have Hyniz so you should use 1:1500 and 2:1500.      I have only played around with a 570 so far but it has Hynix 4GB same as yoru 560's and I have it to 28.3 vs 22 it was at stock. I have some 560s coming in next week so will know better then about those

thanks for the quick reply SummersideGuy...yeah i did run the patcher once...it worked only for one gpu...the one connected to the hdmi where i manage to get 11mH...and i tried to do it again but it just ask me to revert to the default driver/setting...

I will know more once my 4 560s come in and I can experiment with them to see what you are experiencing. The 570 I have now is not hooked t my Monitor and it was the normal routine - Backup bios. modify bios, reboot, run patcher, reboot, good to go. I know from everything I read for Hynix to use line 1500 in your timings. It pushed my 570 up pretty high. I am hoping to get 14+ with the 560s when they get here. Not sure what memory they will have the are Asus Rog Strix models 4GB models. Once I have them and play around i will be able to assist you better

Thanks a lot...i will be waiting for that...i'll try to upload my gpu rom (the original one and the one that i modified) later when i got home. Again thanks for the time. I really appreciate it.

[Branko]

Hi guys, I have 4 Sapphire rx 560 cards and but also a problem with one of them: when the Claymore SW starts it indicates that 1 of them has only
14 compute units
whereas the other 3 have
16 compute units

I was wondering if this is a configuration problem or a problem related to the card hardware...

Any help?

Thank you in advance

Sounds like you bought modded RX460s, but mod didn't work well on one of cards