CRAVE: Revival

[tacaro]

Max Lee starting to promote Crave. x5 before and of this month.

Hope he'll shut up. We don't want him and his pseudo "strategies".

i really do NOT like this men! (Max)

he is talking about us @ youtube livestream 488 viewers

hopefully he shut up soon!

Why ? He has the same objective than the crave community. Hold Crave for years with matesrnodes.

Allied forces guys ! We have the same fight !

[BTC4QB]

I got a problem, I have downloaded the latest version v2.1.0.0  but i can't run it, so i've deleted it and keep running the version v1.4.5.0-g32axxx. Is that ok? or i have to update it, how?  


Ps: where is the awesome roadmap to get Crave to the crypto billionaires club  

1.4.5 chain isnt compatible.

what you mean? i see it still sync correctly... How can i update now? Did i lose my coins?  



thanks

[lukikato]

I got a problem, I have downloaded the latest version v2.1.0.0  but i can't run it, so i've deleted it and keep running the version v1.4.5.0-g32axxx. Is that ok? or i have to update it, how?  


Ps: where is the awesome roadmap to get Crave to the crypto billionaires club  

1.4.5 chain isnt compatible.

what you mean? i see it still sync correctly... How can i update now? Did i lose my coins?  



thanks

Whether before deleting you have saved .dat?
Otherwise you backup your coins are all gone, and can not come back again

[tkon3]

I got a problem, I have downloaded the latest version v2.1.0.0  but i can't run it, so i've deleted it and keep running the version v1.4.5.0-g32axxx. Is that ok? or i have to update it, how?  


Ps: where is the awesome roadmap to get Crave to the crypto billionaires club  

1.4.5 chain isnt compatible.

what you mean? i see it still sync correctly... How can i update now? Did i lose my coins?  



thanks

You wont be able to get rewards with this wallet. Just get the last one,resync and backup your wallet.

[cintrondigital]

I got a problem, I have downloaded the latest version v2.1.0.0  but i can't run it, so i've deleted it and keep running the version v1.4.5.0-g32axxx. Is that ok? or i have to update it, how?  


Ps: where is the awesome roadmap to get Crave to the crypto billionaires club  

1.4.5 chain isnt compatible.

what you mean? i see it still sync correctly... How can i update now? Did i lose my coins?  



thanks

This was addressed in the release that followed 2.0.2.0

First of all backup your wallet.dat. You can make resync by 3 ways,

Delete txleveldb folder and blk0001.dat for resync from network.(takes 7-8 hours/recommended)
Delete txleveldb folder and rename blk0001.dat to bootstrap.dat for faster resync from raw blockchain file. (takes 2-3 hours/highly recommended)
Delete txleveldb folder and blk0001.dat, download blockchain.7z with new txleveldb folder and blk0001.dat and unpack it (2-3 minutes/not recommended).
http://cryptoblock.xyz:30002/bootstrap.dat
http://cryptoblock.xyz:30002/blockchain.7z

[dmanicus]

Hello, I'm practicing cross compiling the windows client on Linux.  I get the following error. Any idea what may be causing it?

obj/txdb-leveldb.o: In function `ZN25zero_after_free_allocatorIcE10deallocateEPcj':
src/crave/src/allocators.h:245: undefined reference to `memory_cleanse(void*, unsigned int)'
src/crave/src/allocators.h:245: more undefined references to `memory_cleanse(void*, unsigned int)' follow
collect2: error: ld returned 1 exit status
makefile.linux-mingw:179: recipe for target 'craved.exe' failed
make: *** [craved.exe] Error 1

[tkon3]

Hello, I'm practicing cross compiling the windows client on Linux.  I get the following error. Any idea what may be causing it?

obj/txdb-leveldb.o: In function `ZN25zero_after_free_allocatorIcE10deallocateEPcj':
src/crave/src/allocators.h:245: undefined reference to `memory_cleanse(void*, unsigned int)'
src/crave/src/allocators.h:245: more undefined references to `memory_cleanse(void*, unsigned int)' follow
collect2: error: ld returned 1 exit status
makefile.linux-mingw:179: recipe for target 'craved.exe' failed
make: *** [craved.exe] Error 1

I think you're the first one to try cross-compiling the wallet, i didnt try it myself. Coolerrsa uses this to compile on Windows, try to get the same boost + mingw version   :
-boost 1.57
-miniupnpc 1.9
-berkeleydb 5.3.28.NC
-openssl 1.0.2k
-qt 5.5.1
-libpng 1.6.29
-secp256k1 included in sources
-mingw i686-4.8.3-release-posix-dwarf-rt_v3-rev0

Also i dont know if the makefile for this is correct since you're the first one to experience it.

EDIT : checked the makefile, some lines are missing for the build :

Code:

OBJS= \
    obj/alert.o \
    obj/version.o \
    obj/checkpoints.o \
    obj/netbase.o \
    obj/addrman.o \
    obj/crypter.o \
    obj/key.o \
    obj/init.o \
    obj/bitcoind.o \
    obj/keystore.o \
    obj/core.o \
    obj/main.o \
    obj/net.o \
    obj/protocol.o \
    obj/rpcclient.o \
    obj/rpcprotocol.o \
    obj/rpcserver.o \
    obj/rpcmisc.o \
    obj/rpcnet.o \
    obj/rpcblockchain.o \
    obj/rpcrawtransaction.o \
    obj/script.o \
    obj/sync.o \
    obj/txmempool.o \
    obj/util.o \
    obj/hash.o \
    obj/noui.o \
    obj/kernel.o \
    obj/pbkdf2.o \
    obj/scrypt.o \
    obj/irc.o \
    obj/chainparams.o

Should be replaced by :

Code:

OBJS= \
    obj/alert.o \
    obj/allocators.o \
    obj/support/cleanse.o \
    obj/base58.o \
    obj/version.o \
    obj/checkpoints.o \
    obj/netbase.o \
    obj/addrman.o \
    obj/crypter.o \
    obj/key.o \
    obj/pubkey.o \
    obj/ecwrapper.o \
    obj/init.o \
    obj/bitcoind.o \
    obj/keystore.o \
    obj/core.o \
    obj/main.o \
    obj/net.o \
    obj/protocol.o \
    obj/rpcclient.o \
    obj/rpcprotocol.o \
    obj/rpcserver.o \
    obj/rpcmisc.o \
    obj/rpcnet.o \
    obj/rpcblockchain.o \
    obj/rpcrawtransaction.o \
    obj/rpcsmessage.o \
    obj/script.o \
    obj/scrypt.o \
    obj/sync.o \
    obj/txmempool.o \
    obj/util.o \
    obj/hash.o \
    obj/noui.o \
    obj/kernel.o \
    obj/pbkdf2.o \
    obj/chainparams.o \
    obj/stealth.o \
    obj/activemasternode.o \
    obj/darksend.o \
    obj/darksend-relay.o \
    obj/instantx.o \
    obj/masternodeconfig.o \
    obj/masternodeman.o \
    obj/masternode.o \
    obj/masternode-payments.o \
    obj/rpcdarksend.o \
    obj/spork.o \
    obj/crypto/hmac_sha256.o \
    obj/crypto/hmac_sha512.o \
    obj/crypto/ripemd160.o \
    obj/crypto/sha1.o \
    obj/crypto/sha256.o \
    obj/crypto/sha512.o \
    obj/irc.o \
    obj/smessage.o

[dmanicus]

Hello, I'm practicing cross compiling the windows client on Linux.  I get the following error. Any idea what may be causing it?

obj/txdb-leveldb.o: In function `ZN25zero_after_free_allocatorIcE10deallocateEPcj':
src/crave/src/allocators.h:245: undefined reference to `memory_cleanse(void*, unsigned int)'
src/crave/src/allocators.h:245: more undefined references to `memory_cleanse(void*, unsigned int)' follow
collect2: error: ld returned 1 exit status
makefile.linux-mingw:179: recipe for target 'craved.exe' failed
make: *** [craved.exe] Error 1

I think you're the first one to try cross-compiling the wallet, i didnt try it myself. Coolerrsa uses this to compile on Windows, try to get the same boost + mingw version   :
-boost 1.57
-miniupnpc 1.9
-berkeleydb 5.3.28.NC
-openssl 1.0.2k
-qt 5.5.1
-libpng 1.6.29
-secp256k1 included in sources
-mingw i686-4.8.3-release-posix-dwarf-rt_v3-rev0

Also i dont know if the makefile for this is correct since you're the first one to experience it.

Thanks, I'll try with those versions and report back.

[tkon3]

Hello, I'm practicing cross compiling the windows client on Linux.  I get the following error. Any idea what may be causing it?

obj/txdb-leveldb.o: In function `ZN25zero_after_free_allocatorIcE10deallocateEPcj':
src/crave/src/allocators.h:245: undefined reference to `memory_cleanse(void*, unsigned int)'
src/crave/src/allocators.h:245: more undefined references to `memory_cleanse(void*, unsigned int)' follow
collect2: error: ld returned 1 exit status
makefile.linux-mingw:179: recipe for target 'craved.exe' failed
make: *** [craved.exe] Error 1

I think you're the first one to try cross-compiling the wallet, i didnt try it myself. Coolerrsa uses this to compile on Windows, try to get the same boost + mingw version   :
-boost 1.57
-miniupnpc 1.9
-berkeleydb 5.3.28.NC
-openssl 1.0.2k
-qt 5.5.1
-libpng 1.6.29
-secp256k1 included in sources
-mingw i686-4.8.3-release-posix-dwarf-rt_v3-rev0

Also i dont know if the makefile for this is correct since you're the first one to experience it.

Thanks, I'll try with those versions and report back.

Edited the first message for a makefile fix, give it a try.

[dmanicus]

Hello, I'm practicing cross compiling the windows client on Linux.  I get the following error. Any idea what may be causing it?

obj/txdb-leveldb.o: In function `ZN25zero_after_free_allocatorIcE10deallocateEPcj':
src/crave/src/allocators.h:245: undefined reference to `memory_cleanse(void*, unsigned int)'
src/crave/src/allocators.h:245: more undefined references to `memory_cleanse(void*, unsigned int)' follow
collect2: error: ld returned 1 exit status
makefile.linux-mingw:179: recipe for target 'craved.exe' failed
make: *** [craved.exe] Error 1

I think you're the first one to try cross-compiling the wallet, i didnt try it myself. Coolerrsa uses this to compile on Windows, try to get the same boost + mingw version   :
-boost 1.57
-miniupnpc 1.9
-berkeleydb 5.3.28.NC
-openssl 1.0.2k
-qt 5.5.1
-libpng 1.6.29
-secp256k1 included in sources
-mingw i686-4.8.3-release-posix-dwarf-rt_v3-rev0

Also i dont know if the makefile for this is correct since you're the first one to experience it.

Thanks, I'll try with those versions and report back.

Edited the first message for a makefile fix, give it a try.

BINGO!  It appears the OBJS was the issue. At least got me past a couple of errors.  Still compiling.  Thanks for the assist!!!

[CDarvin81]

Hi
i've problems to setup my MN on my server

If i ty to use some Ports i get this error:

Code:

2017-07-29 07:19:39 CActiveMasternode::ManageStatus() - Checking inbound connection to 'XX.75.141.164:50423'
2017-07-29 07:19:39 connect() to 62.75.141.164:50423 failed after select(): Connection refused
2017-07-29 07:19:39 CActiveMasternode::ManageStatus() - not capable: Could not connect to XX.75.141.164:50423

This ports are all open...
If i use higher Ports like 80423 i get this:

Code:

2017-07-29 07:20:29  addr XX.75.141.164:80423
2017-07-29 07:20:29 CActiveMasternode::ManageStatus() - Checking inbound connection to 'XX.75.141.164:0'

Masternode would start, but i think this is not right. seems like an Integer overflow on the Port because its markt "0"

I'had run the node for 1 day but no income an i don't see the node on the MN-List.

Code:

{
    "version" : "v2.1.0.0-60025",
    "protocolversion" : 60025,
    "walletversion" : 60000,
    "balance" : 500.00000000,
    "darksend_balance" : 0.00000000,
    "newmint" : 0.00000000,
    "stake" : 0.00000000,
    "blocks" : 809899,
    "timeoffset" : 0,
    "moneysupply" : 1324174.00000000,
    "connections" : 2,
    "proxy" : "",
    "ip" : "XX.75.141.164",
    "difficulty" : 81150.71818611,
    "testnet" : false,
    "keypoololdest" : 1501257658,
    "keypoolsize" : 101,
    "paytxfee" : 0.00001000,
    "mininput" : 0.00000000,
    "unlocked_until" : 0,
    "errors" : ""
}

The IP is also ok by the Node.

What could the problem be???

[BTC4QB]

I got a problem, I have downloaded the latest version v2.1.0.0  but i can't run it, so i've deleted it and keep running the version v1.4.5.0-g32axxx. Is that ok? or i have to update it, how?  


Ps: where is the awesome roadmap to get Crave to the crypto billionaires club  

1.4.5 chain isnt compatible.

what you mean? i see it still sync correctly... How can i update now? Did i lose my coins?  



thanks

This was addressed in the release that followed 2.0.2.0

First of all backup your wallet.dat. You can make resync by 3 ways,

Delete txleveldb folder and blk0001.dat for resync from network.(takes 7-8 hours/recommended)
Delete txleveldb folder and rename blk0001.dat to bootstrap.dat for faster resync from raw blockchain file. (takes 2-3 hours/highly recommended)
Delete txleveldb folder and blk0001.dat, download blockchain.7z with new txleveldb folder and blk0001.dat and unpack it (2-3 minutes/not recommended).
http://cryptoblock.xyz:30002/bootstrap.dat
http://cryptoblock.xyz:30002/blockchain.7z

So, i need resync with version 2.0.2.0 and then i can update to the latest version right? can you give me a compiled version of 2.0.2.0? thanks

[tkon3]

Hi
i've problems to setup my MN on my server

If i ty to use some Ports i get this error:

Code:

2017-07-29 07:19:39 CActiveMasternode::ManageStatus() - Checking inbound connection to 'XX.75.141.164:50423'
2017-07-29 07:19:39 connect() to 62.75.141.164:50423 failed after select(): Connection refused
2017-07-29 07:19:39 CActiveMasternode::ManageStatus() - not capable: Could not connect to XX.75.141.164:50423

This ports are all open...
If i use higher Ports like 80423 i get this:

Code:

2017-07-29 07:20:29  addr XX.75.141.164:80423
2017-07-29 07:20:29 CActiveMasternode::ManageStatus() - Checking inbound connection to 'XX.75.141.164:0'

Masternode would start, but i think this is not right. seems like an Integer overflow on the Port because its markt "0"

I'had run the node for 1 day but no income an i don't see the node on the MN-List.

Code:

{
    "version" : "v2.1.0.0-60025",
    "protocolversion" : 60025,
    "walletversion" : 60000,
    "balance" : 500.00000000,
    "darksend_balance" : 0.00000000,
    "newmint" : 0.00000000,
    "stake" : 0.00000000,
    "blocks" : 809899,
    "timeoffset" : 0,
    "moneysupply" : 1324174.00000000,
    "connections" : 2,
    "proxy" : "",
    "ip" : "XX.75.141.164",
    "difficulty" : 81150.71818611,
    "testnet" : false,
    "keypoololdest" : 1501257658,
    "keypoolsize" : 101,
    "paytxfee" : 0.00001000,
    "mininput" : 0.00000000,
    "unlocked_until" : 0,
    "errors" : ""
}

The IP is also ok by the Node.

What could the problem be???

Port 65535 is the highest possible on a machine.
Add externalip=YOUR_IP and port=YOUR_PORT in your conf file.
And check if its reachable from outside.

[tkon3]

I got a problem, I have downloaded the latest version v2.1.0.0  but i can't run it, so i've deleted it and keep running the version v1.4.5.0-g32axxx. Is that ok? or i have to update it, how?  


Ps: where is the awesome roadmap to get Crave to the crypto billionaires club  

1.4.5 chain isnt compatible.

what you mean? i see it still sync correctly... How can i update now? Did i lose my coins?  



thanks

This was addressed in the release that followed 2.0.2.0

First of all backup your wallet.dat. You can make resync by 3 ways,

Delete txleveldb folder and blk0001.dat for resync from network.(takes 7-8 hours/recommended)
Delete txleveldb folder and rename blk0001.dat to bootstrap.dat for faster resync from raw blockchain file. (takes 2-3 hours/highly recommended)
Delete txleveldb folder and blk0001.dat, download blockchain.7z with new txleveldb folder and blk0001.dat and unpack it (2-3 minutes/not recommended).
http://cryptoblock.xyz:30002/bootstrap.dat
http://cryptoblock.xyz:30002/blockchain.7z

So, i need resync with version 2.0.2.0 and then i can update to the latest version right? can you give me a compiled version of 2.0.2.0? thanks

Just download the last release and sync. If its not working, try to compile the wallet yourself.

[CDarvin81]

Thank's the add from:

Code:

externalip=xx.75.141.164
port=9999

and edit to

Code:

masternodeaddr=xx.75.141.164:9999

had solve this problem.

[btct22]

Transfercoin has quite a good android wallet which looks just like the QT app, is that something that could be done with the Crave codebase or does it need a whole lot of work?  It could also be too heavy as is with a full blockchain DB. 

PIVX has just launched their android wallet and that's quite nice, it uses a new version of their masternode code to create a trusted node that the mobile wallet connects to and that makes it fast to load and easy to use.

[NEVER.SELL.CRAVE....EVER]

Transfercoin has quite a good android wallet which looks just like the QT app, is that something that could be done with the Crave codebase or does it need a whole lot of work?  It could also be too heavy as is with a full blockchain DB. 

PIVX has just launched their android wallet and that's quite nice, it uses a new version of their masternode code to create a trusted node that the mobile wallet connects to and that makes it fast to load and easy to use.

I guess it will be our next goal 

[dmanicus]

Hello, I'm practicing cross compiling the windows client on Linux.  I get the following error. Any idea what may be causing it?

obj/txdb-leveldb.o: In function `ZN25zero_after_free_allocatorIcE10deallocateEPcj':
src/crave/src/allocators.h:245: undefined reference to `memory_cleanse(void*, unsigned int)'
src/crave/src/allocators.h:245: more undefined references to `memory_cleanse(void*, unsigned int)' follow
collect2: error: ld returned 1 exit status
makefile.linux-mingw:179: recipe for target 'craved.exe' failed
make: *** [craved.exe] Error 1

I think you're the first one to try cross-compiling the wallet, i didnt try it myself. Coolerrsa uses this to compile on Windows, try to get the same boost + mingw version   :
-boost 1.57
-miniupnpc 1.9
-berkeleydb 5.3.28.NC
-openssl 1.0.2k
-qt 5.5.1
-libpng 1.6.29
-secp256k1 included in sources
-mingw i686-4.8.3-release-posix-dwarf-rt_v3-rev0

Also i dont know if the makefile for this is correct since you're the first one to experience it.

Thanks, I'll try with those versions and report back.

Edited the first message for a makefile fix, give it a try.

BINGO!  It appears the OBJS was the issue. At least got me past a couple of errors.  Still compiling.  Thanks for the assist!!!

I finally go this to compile. secp256k1 was a pain  in arse. It was a worhtwhile experiment.

Now, looking forward to some mooning.

[lukikato]

I got a problem, I have downloaded the latest version v2.1.0.0  but i can't run it, so i've deleted it and keep running the version v1.4.5.0-g32axxx. Is that ok? or i have to update it, how?  


Ps: where is the awesome roadmap to get Crave to the crypto billionaires club  

1.4.5 chain isnt compatible.

what you mean? i see it still sync correctly... How can i update now? Did i lose my coins?  



thanks

This was addressed in the release that followed 2.0.2.0

First of all backup your wallet.dat. You can make resync by 3 ways,

Delete txleveldb folder and blk0001.dat for resync from network.(takes 7-8 hours/recommended)
Delete txleveldb folder and rename blk0001.dat to bootstrap.dat for faster resync from raw blockchain file. (takes 2-3 hours/highly recommended)
Delete txleveldb folder and blk0001.dat, download blockchain.7z with new txleveldb folder and blk0001.dat and unpack it (2-3 minutes/not recommended).
http://cryptoblock.xyz:30002/bootstrap.dat
http://cryptoblock.xyz:30002/blockchain.7z

So, i need resync with version 2.0.2.0 and then i can update to the latest version right? can you give me a compiled version of 2.0.2.0? thanks

Just download the last release and sync. If its not working, try to compile the wallet yourself.

And if the problem is not resolved and you do not have a backup, then your funds can not recover

[jt42]

Hello, I'm looking to set up a masternode from the Windows wallet.  Can someone direct me to instructions?  I saw the Linux masternode steps, but would like to know if a Windows wallet masternode is possible.  I have a static external IP.