anybody know what i am doing wrong?

Not capable masternode: Could not connect to 62.238.79.24:9399
This usually means the port 9399 is not open on your router / computer. Open the port on your router using the port forwarding function and go here and check
http://ping.eu/port-chk/ to check again.
yes it said it is blocked.
but i did what they say on the
https://www.dascrypto.com/das-technologies/masternodes/windows-guide/than why its not working?
i need to change something on my Asus RT-AC87U Router?
9. press WINDOWS BUTTON+R, this will bring up a “Run” menu
10. Enter “cmd” into the box and press enter. You will be presented with a console command window.
11. In this console, enter “ipconfig”, you will get something like this:
12. The IPv4 address under your ETHERNET ADAPTER will be your MASTERNODEADDR. Copy it down.
13. Go here
http://whatismyipaddress.com/14. This will show your EXTERNAL IP or OUTWARD-FACING IP, copy it down
15. Press WINDOWS+R again, enter “wf.msc”
16. This will open your windows firewall settings, on the left tab there will be “Incoming Rules” and “Outgoing Rules”, you must click on one and you will see an “Actions” tab on the right, the first being “New rule..”, click on that and you will be presented with a wizard to create a new rule for connections.
17. Click on PORT->Next
18. TCP/UDP – Here we are going to create one for each for outgoing/incoming rules for a total of 4 rules (inbound TCP 9399, inbound UDP 9399, outbound TCP 9399, outbound UDP 9399)
19. Under “Specific Ports” enter 9399->Next
20. Allow all connections for All 4 Rules
21. Close wallet, go to your windows file explorer (open a folder). Type %appdata% into the address bar, navigate to the “Das” folder. Your location should read “<drive>\Users\<user>\AppData\Roaming\Das”
22. In this folder there is a file titled das.conf, open it and enter this:
