|ANN| DAS - Decentralized and Secure. Private Send. Masternodes.

[Albortz]

I am following this thread for multiple days now. I think I found it 3 days after launch....


Even tho I admire what the community did so far and how passionate they are, but I hear way to little from dev, especially considering he already burned a coin to the ground...

Second, you guys are really focusing on the wrong steps.


I don't have a windows and no Linux system on my computers. But even if I had, its not clear, if the wallets work 100%.

Before you really consider pumping prices, adding MN to sites and spreading the word, you should create a Mac OS X wallet and fix the existing ones.  Only if they work and its point and shoot easy to set up a wallet, load the blockchain and set up MN without comand lines you will be able to attract the masses.



And I still don't see any reason to invest in it, other that it is limited to 18m coins... And the price is also to high, I would dump you coins until it is resolved. Way to many problems during launch already

[1714651756]

1714651756

[1714651756]

1714651756

[1714651756]

1714651756

[polylogic]

the dev doesnt have to write or awnser anything in here.
i would rather have him sit behind the led screen updating das.
but wait. updates for coins can break the coins.
ok wait with updates untill something good happend and its worth updating.
there once was a saying, "do not update as long as it is working"
these days people want updates even if it doesnt change anything for them xD
i say make updates important again! ^^

osx wallet, meh, i say buy a real computer xD
just kidding, maybe radix42 could make a port.
he did some other coins osx ports, i may ask him

_{kw31 #deeponion w107c560/09}

[Amphiptere]

I am following this thread for multiple days now. I think I found it 3 days after launch....


Even tho I admire what the community did so far and how passionate they are, but I hear way to little from dev, especially considering he already burned a coin to the ground...

Second, you guys are really focusing on the wrong steps.


I don't have a windows and no Linux system on my computers. But even if I had, its not clear, if the wallets work 100%.

Before you really consider pumping prices, adding MN to sites and spreading the word, you should create a Mac OS X wallet and fix the existing ones.  Only if they work and its point and shoot easy to set up a wallet, load the blockchain and set up MN without comand lines you will be able to attract the masses.



And I still don't see any reason to invest in it, other that it is limited to 18m coins... And the price is also to high, I would dump you coins until it is resolved. Way to many problems during launch already

I'm tuned off as well.  My advice would be to write a MN setup guide that the average person could follow and understand.  Dev it seems to me like it would be easy to blog or tweet a random update about what you're doing every now and then.  It would ease everyone's panic and contradict the losers that go on here just to say the coin is dead or should be dumped. Best of luck.

[polylogic]

here is why i like das:

- low entry, i brought my mn for $150, currently its only $108 ... try to buy a dash masternode, it would be worth it, but the entry is very high and so are most masternode coins. there may always be low entry masternode coins, older once will raise because new generations want to join the rush but cant afford it
- the website and logo look great, "namehere" did a great job.
- crpyto masternode tech is brand new. passive income for life! dont sleep, there is room for more than one coin.
- masternodes get a lot of attention. sooner or later those coins will be massive because of the way it works.
- pos vs masternode? pos needs alot of coins to be worth it. masternodes should have the advantage but i know nothing.

ah well, enough for now, i tell you, buy some das, setup masternode, sit back and enjoy the payments, it feels great

_{kw31 #deeponion w160c859/10}

[Albortz]

here is why i like das:

- low entry, i brought my mn for $150, currently its only $108 ... try to buy a dash masternode, it would be worth it, but the entry is very high and so are most masternode coins. there may always be low entry masternode coins, older once will raise because new generations want to join the rush but cant afford it
- the website and logo look great, "namehere" did a great job.
- crpyto masternode tech is brand new. passive income for life! dont sleep, there is room for more than one coin.
- masternodes get a lot of attention. sooner or later those coins will be massive because of the way it works.
- pos vs masternode? pos needs alot of coins to be worth it. masternodes should have the advantage but i know nothing.

ah well, enough for now, i tell you, buy some das, setup masternode, sit back and enjoy the payments, it feels great

_{kw31 #deeponion w160c859/10}

This is not only on that quote but also on the one post of yours before.


I would also like to see the dev work behind his screen instead of trolling, but as a business person I know how crucial it is to at least give regular updates even if its just once a day a tweet, what he did or is going to do.  Heck let it be ever 2 days. This would be enough to show that there is work done.

Website and guides have been written by community members, the the wallet im not sure, but as far as i remember it was overhauled by community members....


There is a lot of active power here (if they don't fight each other)



A Dash MN was just a couple hundred/thousand bucks half a year ago, but the coin itself is old. The price jumped after the new divs became active and showed where they wanna go with it. They communicated.

I am aware that its cheap to enter, but what does it pay? 


How much DAS do you get per day for 1000 DAS in your MN?   what happens after the total amount is reached?


Cheap entry means low payout. lets say you get 50 DAS a day. That would bring in 180 bucks a month. But that won't stay like that.

If you deduct the price of a VPS each month and considering you might need a VPS for each Node, it is a lit more expensive than most people would argue (in the long run)


But I would really like to know how much a 1000DAS MN brings in a day

[peachcakey]

Between 6 -10 DAS/day/MN

[lupanar]

Donate to enter in https://masternodes.pro people, every MN coin must be there, only 77$ left.

[samrajyacoin]

Donate to enter in https://masternodes.pro people, every MN coin must be there, only 77$ left.

should go down to $56 anytime now

[lupanar]

Donate to enter in https://masternodes.pro people, every MN coin must be there, only 77$ left.

should go down to $56 anytime now

Indeed, thanks for participating 
Only 57$ needed more!

[Lyngaa]

Donate to enter in https://masternodes.pro people, every MN coin must be there, only 77$ left.

should go down to $56 anytime now

Indeed, thanks for participating 
Only 57$ needed more!

I love the initiativ, but with a 3,5% premine, why dont the dev pay up to premote this coin, as far as i know, all promotion have been paid by "investors" in this project (website, slack and so on). ifthe 1 dev. on this procejt leaves we are left with ......

i will tip in if our dev will as well.

[samrajyacoin]

Donate to enter in https://masternodes.pro people, every MN coin must be there, only 77$ left.

should go down to $56 anytime now

Indeed, thanks for participating 
Only 57$ needed more!

pleasure!

Trying to set up MN
saved das.conf. after that when trying to open wallet again by running das-qt.exe, error: cannot resolve - bind address 'YOUR IPv4 ADDRESS>:9399'
someone please guide in simple language to easily understand
or if someone can spare sometime to make a youtube video please. i will appreciate and support as possible if incase.
thanks

[samrajyacoin]

Donate to enter in https://masternodes.pro people, every MN coin must be there, only 77$ left.

should go down to $56 anytime now

Indeed, thanks for participating 
Only 57$ needed more!

pleasure!

Trying to set up MN
saved das.conf. after that when trying to open wallet again by running das-qt.exe, error: cannot resolve - bind address 'YOUR IPv4 ADDRESS>:9399'
someone please guide in simple language to easily understand
or if someone can spare sometime to make a youtube video please. i will appreciate and support as possible if incase.
thanks

MN set-up completed.
But i am not sure if i have below correctly.

server=1
daemon=1
listen=1
rpcuser=username
rpcpassword=wallet password
rpcport=9399
rpcallowip=ipv4 address
masternode=1
masternodeprivkey=private key generated from wallet debug console
masternodeaddr=ipv4 address:9399
bind=ipv4 address:9399
externalip=outward-facing ip:9399

someone please check and advise.
Thanks

[shwin]

Donate to enter in https://masternodes.pro people, every MN coin must be there, only 77$ left.

should go down to $56 anytime now

Indeed, thanks for participating 
Only 57$ needed more!

pleasure!

Trying to set up MN
saved das.conf. after that when trying to open wallet again by running das-qt.exe, error: cannot resolve - bind address 'YOUR IPv4 ADDRESS>:9399'
someone please guide in simple language to easily understand
or if someone can spare sometime to make a youtube video please. i will appreciate and support as possible if incase.
thanks

MN set-up completed.
But i am not sure if i have below correctly.

server=1
daemon=1
listen=1
rpcuser=username
rpcpassword=wallet password
rpcport=9399
rpcallowip=ipv4 address
masternode=1
masternodeprivkey=private key generated from wallet debug console
masternodeaddr=ipv4 address:9399
bind=ipv4 address:9399
externalip=outward-facing ip:9399

someone please check and advise.
Thanks

server=1
daemon=1
listen=1
rpcuser=username
rpcpassword=<any password, dont use wallet password>
rpcport=9399
rpcallowip=ipv4 address
masternode=1
masternodeprivkey=private key generated from wallet debug console
masternodeaddr=ipv4 address:9399 dont need this
bind=ipv4 address:9399 dont need this
externalip=outward-facing ip:9399

[samrajyacoin]

Donate to enter in https://masternodes.pro people, every MN coin must be there, only 77$ left.

should go down to $56 anytime now

Indeed, thanks for participating 
Only 57$ needed more!

pleasure!

Trying to set up MN
saved das.conf. after that when trying to open wallet again by running das-qt.exe, error: cannot resolve - bind address 'YOUR IPv4 ADDRESS>:9399'
someone please guide in simple language to easily understand
or if someone can spare sometime to make a youtube video please. i will appreciate and support as possible if incase.
thanks

MN set-up completed.
But i am not sure if i have below correctly.

server=1
daemon=1
listen=1
rpcuser=username
rpcpassword=wallet password
rpcport=9399
rpcallowip=ipv4 address
masternode=1
masternodeprivkey=private key generated from wallet debug console
masternodeaddr=ipv4 address:9399
bind=ipv4 address:9399
externalip=outward-facing ip:9399

someone please check and advise.
Thanks

server=1
daemon=1
listen=1
rpcuser=username
rpcpassword=<any password, dont use wallet password>
rpcport=9399
rpcallowip=ipv4 address
masternode=1
masternodeprivkey=private key generated from wallet debug console
masternodeaddr=ipv4 address:9399 dont need this
bind=ipv4 address:9399 dont need this
externalip=outward-facing ip:9399

Thanks for response!
In debug console, entered masternode start <mywalletpasseord>
Message reads: Masternode input must have at least 15 confirmations
Now do i wait or if there is anything more to be done.
Please advise.

[NuMrBean]

Donate to enter in https://masternodes.pro people, every MN coin must be there, only 77$ left.

should go down to $56 anytime now

Indeed, thanks for participating 
Only 57$ needed more!

pleasure!

Trying to set up MN
saved das.conf. after that when trying to open wallet again by running das-qt.exe, error: cannot resolve - bind address 'YOUR IPv4 ADDRESS>:9399'
someone please guide in simple language to easily understand
or if someone can spare sometime to make a youtube video please. i will appreciate and support as possible if incase.
thanks

Would appreciate that, too. Would be very helpful!

[polylogic]

Polylogic - DAS - Masternode Guide - Windows/Linux Cold Wallet + Ubuntu 16.x VPS Masternode LINK

Part 01
Lets prepare the Cold Storage (this should work with any OS)

- Install the (Windows) Wallet and sync with Network
- Send 1000.01 DAS from Exchange to your 0 address (send 0.01 DAS more than nessesary because of fees)
- Encrypt Wallet with Strong Password
- Backup Wallet.dat File
- Open Debug Console and type without ":

Code:

dumpprivkey "walletaddress"

- Save the Private Key to a txt file and type:

Code:

masternode genkey

- This is your Masternode Key, save it aswell.

Code:

masternode outputs

- Save This Data too. Its your Transaction ID and IDX. We need all those keys later.
- now backup your wallet.dat

if you want to manage 2+ masternodes you have to:
 - close the wallet delete the wallet .dat in /%appdata%/.das/
 - open wallet and a you will get new address 0
 - repeat the first steps of the tutorial.
 - now import the old address 0 by typing "importprivkey <YOUR_PRIVATE_KEY>
 - this part of the tutorial is still incomlete, to be continued but all the important steps are here xD

Part 02
Prepare the Linux VPS (Ubuntu 16.x)

WARNING - WARNING - WARNING - WARNING - WARNING - WARNING

if you dont know how to operate a Linux Server,
then you should think twice about setting up a Masternode Server.
Masternodes have a Public IP Address and may be subject to Intruders and Hacking attemts.
We have to properly secure the server and keep it updated.
For now, this Tutorial will provide you with a basic security but it is highly advised to
take the proper precautions and stay alert.

i will update this guide to my best knowlege, maybe one of you can give some iptables tips
and how we get fail2ban goin.

WARNING - WARNING - WARNING - WARNING - WARNING - WARNING

if you dont know what you are doing and still want to participate just copy paste the commands.

- log into your vps via ssh (i use putty)

Code:

apt update
apt upgrade

- now we change the ssh port to some number you like

Code:

nano /etc/ssh/sshd_config

change the port from 22 to your lucky number.
if you have never worked with nano:
look at the bottom, it shows the menu, press CTRL + X to Exit & Save

- restart the ssh service

Code:

service ssh restart

- now disconnect and log back in, use your new port.

- lets setup the firewall and open ports for ssh and DAS (Port 9399)

Code:

sudo ufw allow ssh
ufw limit ssh/tcp
sudo uhf allow 9399/tcp
ufw logging on

enable the firewall:

Code:

ufw enable

use _{ufw status} and _{ufw disable} if you need to disable the firewall.

- reboot the vps and log back in.

- check the internet on how to secure your vps, there is still much to learn.


Part 03
Install DAS

WARNING - WARNING - WARNING - WARNING - WARNING - WARNING

there are currently two ways to install DAS.
build the application from source-code or use a already build and compiled version.
the only available build is by a community member and you should know that he could have changed some code.
i am going to trust whywefight that he didnt.
but normaly you should never trust a compiled version by a 3rd Party, especially in the crypto scene.

i will also you provide with the steps to build DAS from Source yourself,
this maybe doesnt work, if you dont complie things on a daily basis you forget stuff like that.
feel free to provide us with the correct steps.

WARNING - WARNING - WARNING - WARNING - WARNING - WARNING


you only need to do one of those two steps:

Part 03.1
Install and launch DAS by downloading the Build:

 - you should be logged into your vps as root

Code:

apt install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils
add-apt-repository ppa:bitcoin/bitcoin -y
apt-get update
apt-get install libdb4.8-dev bsdmainutils libdb4.8++-dev -y
adduser das
su - das
wget https://github.com/whywefight/DAS-12.2/blob/master/das-cli
wget https://github.com/whywefight/DAS-12.2/blob/master/das-tx
wget https://github.com/whywefight/DAS-12.2/blob/master/dasd
su root
chmod 777 ./dasd
chmod 777 ./das-cli
chmod 777 ./das-tx
cp -v /home/das/* /usr/local/bin/
su das
dasd -daemon

this is it. now DAS is running, started by user das.
verify that DAS is connected with:

Code:

das-cli getinfo

or

./das-cli getinfo

its not running? i changed some lines up there without testing xD
try to launch it like this _{./dasd -daemon}



Part 03.2
Install and launch DAS by building the source:

for more information check the wiki

Code:

apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils
apt-get install -y build-essential software-properties-common autoconf libssl-dev libboost-dev libboost-chrono-dev libboost-filesystem-dev libboost-program-options-dev libboost-system-dev libboost-test-dev libboost-thread-dev sudo automake git
add-apt-repository ppa:bitcoin/bitcoin -y
apt-get update
apt-get install libdb4.8-dev bsdmainutils libdb4.8++-dev -y
adduser das
su - das
su root
git clone https://github.com/Truckman83/DAS-source.git
cd DAS-source
./autogen.sh
./configure
make

this may take a while, grab some tea.

Code:

cp -v /home/das/DAS-source/src/dasd /home/das/
cp -v /home/das/DAS-source/src/das-cli /home/das/
cp -v /home/das/DAS-source/src/das-tx /home/das/
cd /home/das/
chmod 777 ./dasd
chmod 777 ./das-cli
chmod 777 ./das-tx
cp -v /home/das/* /usr/local/bin/
su - das

and launch:

Code:

dasd -daemon

or

./dasd -daemon

either way you got DAS synced and running...


Part 04
Enable masternode and point it to our wallet:

Code:

das-cli stop
su root
nano /home/das/.das/das.conf

we now edit the configuration file, copy paste the following, edit with your data and save.

Code:

rpcuser=user
rpcpassword=password
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
staking=0

masternode=1
externalip=<YOUR_PUBLIC_VPS_IP_ADDRESS>:9399
masternodeprivkey=<YOUR_MASTERNODEKEY>

we are almost done, all we need to do now is start DAS again.

Code:

su das
dasd -daemon

Part 05
BTCBTCBTC Start the Masternode-Service and earn DAS! BTCBTCBTC

congratulations, you have come a long way, now its time to earn some money

The last step has to be done with the Cold Wallet,
edit the masternode config and add:

Code:

<MASTERNODENAME-ALIAS> <YOUR_PUBLIC_VPS_IP_ADDRESS>:9399 <YOUR_MASTERNODEKEY> <YOUR_TRANSACTION_ID> <IDX>

now restart the wallet to load the config file.
unlock wallet
enter debug console

Code:

masternode start-all

this is it, simple right?
your masternode is running and earning 24/7.
you can close the wallet or keep it open and synced.
Windows 10 gives you Notifications on Incomming Transactions.

here are some more tips:

Cold Wallet:
- use the debug console, try _help or _{help masternode}
- take a look at the masternode list and look up your Transactions ID with _{masternode list} you can also see the status there.

VPS Masternode:
try _{masternode status} once everything has been done to verify your node working.


sit back, enjoy and donate some DAS
i am goin to add some credits later

[Th3End]

Great work Polylogic!!! Really good guide!
Can i also set up my MN with this guide on a Ubuntu 14.04 OS?

[blueboxster]

Dear Forum readers,

I have a Windows  masternode related question :

Can I use a WIFI connected Windows PC as masternode or it must be connected to the internet via LAN ethernet cable ?


Thanks in advance for your help.

Happy staking.

 

[polylogic]

Can i also set up my MN with this guide on a Ubuntu 14.04 OS?

thanks, it should work, maybe you will run into some problems with dependencies, ive read it somewhere

Can I use a WIFI connected Windows PC as masternode or it must be connected to the internet via LAN ethernet cable ?

you can use wifi, but make sure it is stable

[NuMrBean]

Can i also set up my MN with this guide on a Ubuntu 14.04 OS?

thanks, it should work, maybe you will run into some problems with dependencies, ive read it somewhere

Can I use a WIFI connected Windows PC as masternode or it must be connected to the internet via LAN ethernet cable ?

you can use wifi, but make sure it is stable

I can confirm that if your WiFi is not stable, running a MN is no fun!