Megaminer 6.3 - Multi pool / Multi Algo launcher

[tutulfo]

Is this miner ever saving benchmark data on close and actually mining the profitable coin some day?

It freezes after hours (script just doesn't finish benchmarking) and when I close it and restart, it goes through ALL algorithm again instead of only those untested.

Could we cut the crap and mine things finally? :>

6.X release has a problem with some AMD rigs, I have uploaded to github master code changes to avoid this (not to solve 100% because activity based watchdog is disabled to prevent that).


https://github.com/tutulino/Megaminer/issues/351

[tutulfo]

Hey, would you check zergpool again,
now all algos shows 0 profit.

I have uploaded fix minutes ago

[tutulfo]

Hey, would you check zergpool again,
now all algos shows 0 profit.

I have uploaded fix minutes ago

Thanks!
Not sure but probably skein need some divisor maybe.

P.S. yeah I manually added 0.001 and now looks fine.

I´m not getting bad profit with skein

[twente-mining]

zergpool.com will not be available anymore(if someone still used it) as startum endpoint, please use mine.zergpool.com or europe.mine.zergpool.com

[Amstellodamois]

I see MegaMiner does benchmark power limits.

Is it able to do the same with overclocking settings? Or, at least, choose a different profile for every algo?

[tutulfo]

I see MegaMiner does benchmark power limits.

Is it able to do the same with overclocking settings? Or, at least, choose a different profile for every algo?

No, MM can´t set overclock.

You have option to set a command before launch each miner (not each algo),but a miner has various algorithms, to solve this some people split miner file in 2 or 3, each one with desired algos, and add call to afterburner to set profile.

[Amstellodamois]

Any intention to deploy such feature?

Same with intensity: benchmarking a few values would be cool.

[bttalkdim2]

Hello,

Is it really good idea to set such big time  ??
@@INTERVAL_PPLS=1800

As I see for example algoritm "tribus" profitable only about 2-3 minutes,
but we will mine it 30 minutes...

Last days I tested
Nicehash (without megaminer)
and Megaminer on Ahashpool with settings  "Automatic24h"
- results are same!

Somebody compared results with settings  "Automatic24h" vs "Automatic" ??

What settings/pools are you using for best results ?

[ravenj]

Hello,

First of all thank you for work.

I've been testing for a few and comparing with nicehash legacy and I can't seem to get dual mining working on nicehash. I believe that's where the difference is between the two and I would rather use Megaminer.

How can I get it to work?

Best regards

[warnerdark]

Hello minors

I mine with 6 rx480 and I have a power value concern. During the mining I did not have the "PowerAvg" indicated.
Is there a way to integrate this value with a specific setting in the "config.txt" or should we change the "core.ps1" in order to get this value from the rx480 cards

Thank you in advance for your answers
ps: a big thank you for this system

[tutulfo]

Any intention to deploy such feature?

Same with intensity: benchmarking a few values would be cool.

Not at this momemt, problem for overclocking is that is not NVIDIA-SMI supported. I dont know any command line utility that can change nvidia and/or amd speed. It also can be done with C++ own coding but I am not strong on it.

Problem with intensities is the absence of standard for miners, each miner use its own default values for each algo and miner crash or hang can appear if too elevated intensity is selected. I think something can be done and it is in my to-do list but not next releases.

[tutulfo]

Hello,

Is it really good idea to set such big time  ??
@@INTERVAL_PPLS=1800

As I see for example algoritm "tribus" profitable only about 2-3 minutes,
but we will mine it 30 minutes...

Last days I tested
Nicehash (without megaminer)
and Megaminer on Ahashpool with settings  "Automatic24h"
- results are same!

Somebody compared results with settings  "Automatic24h" vs "Automatic" ??

What settings/pools are you using for best results ?

For PPLS frequently jumps are not good idea, PPLS pools pay only last N shares when block is found, if you jump frequently of one algo to another and pool find a block you can find that your last shares for an algo was before that "N shares" because while "N shares" period you was mining another algo, then pool don´t pay you nothing and your work for that algo went trash.


Same conclusion, ahashpool 24h profit aprox. equal to nicehash, I was mining at nicehash last week.

[tutulfo]

Hello,

First of all thank you for work.

I've been testing for a few and comparing with nicehash legacy and I can't seem to get dual mining working on nicehash. I believe that's where the difference is between the two and I would rather use Megaminer.

How can I get it to work?

Best regards

In 6.0 release dual miner for Nvidia is included in "additional miners folder" you must move it to "miners" folder to activate.


Next release it will be included at "miners" folder because dual mining is one of most profitable combination for Nvidia now.

[tutulfo]

Hello minors

I mine with 6 rx480 and I have a power value concern. During the mining I did not have the "PowerAvg" indicated.
Is there a way to integrate this value with a specific setting in the "config.txt" or should we change the "core.ps1" in order to get this value from the rx480 cards

Thank you in advance for your answers
ps: a big thank you for this system

Please execute Gpulist.bat and post exit.

[warnerdark]

Hello minors

I mine with 6 rx480 and I have a power value concern. During the mining I did not have the "PowerAvg" indicated.
Is there a way to integrate this value with a specific setting in the "config.txt" or should we change the "core.ps1" in order to get this value from the rx480 cards

Thank you in advance for your answers
ps: a big thank you for this system

Please execute Gpulist.bat and post exit.

here are the informations you asked me

   Type : NVIDIA

GpuId GpuGroup Name
----- -------- ----
    0          NVIDIA-SMI couldn't find nvml.dll library in your system. Please make sure that the NVIDIA Display
               Driver is properly installed and present in your system.
    1          Please also try adding directory that contains nvml.dll to your system PATH.




   Type : AMD

GpuId GpuGroup Name                         Gpu Temp FanSpeed Power* PowLmt  ClkGpu  ClkMem
----- -------- ----                         --- ---- -------- ------ ------  ------  ------
    0      AMD Radeon (TM) RX 480 Graphics 100%   66      53%      W    50% 1113Mhz 2000Mhz
    1      AMD Radeon (TM) RX 480 Graphics 100%   63      46%      W    50% 1140Mhz 2000Mhz
    2      AMD Radeon (TM) RX 480 Graphics 100%   64      46%      W    50% 1091Mhz 2000Mhz
    3      AMD Radeon (TM) RX 480 Graphics   0%   63      53%      W    50% 1131Mhz 2000Mhz
    4      AMD Radeon (TM) RX 480 Graphics 100%   62      47%      W    50% 1025Mhz 2000Mhz
    5      AMD Radeon (TM) RX 480 Graphics   0%   57      42%      W    50% 1077Mhz 2000Mhz


Appuyez sur une touche pour continuer...

the column "Power *" is empty and I do not know how to integrate this value in MM. If you know how to do it, I'm interested.
thank you

[tutulfo]

Hello minors

I mine with 6 rx480 and I have a power value concern. During the mining I did not have the "PowerAvg" indicated.
Is there a way to integrate this value with a specific setting in the "config.txt" or should we change the "core.ps1" in order to get this value from the rx480 cards

Thank you in advance for your answers
ps: a big thank you for this system

Please execute Gpulist.bat and post exit.

here are the informations you asked me

   Type : NVIDIA

GpuId GpuGroup Name
----- -------- ----
    0          NVIDIA-SMI couldn't find nvml.dll library in your system. Please make sure that the NVIDIA Display
               Driver is properly installed and present in your system.
    1          Please also try adding directory that contains nvml.dll to your system PATH.




   Type : AMD

GpuId GpuGroup Name                         Gpu Temp FanSpeed Power* PowLmt  ClkGpu  ClkMem
----- -------- ----                         --- ---- -------- ------ ------  ------  ------
    0      AMD Radeon (TM) RX 480 Graphics 100%   66      53%      W    50% 1113Mhz 2000Mhz
    1      AMD Radeon (TM) RX 480 Graphics 100%   63      46%      W    50% 1140Mhz 2000Mhz
    2      AMD Radeon (TM) RX 480 Graphics 100%   64      46%      W    50% 1091Mhz 2000Mhz
    3      AMD Radeon (TM) RX 480 Graphics   0%   63      53%      W    50% 1131Mhz 2000Mhz
    4      AMD Radeon (TM) RX 480 Graphics 100%   62      47%      W    50% 1025Mhz 2000Mhz
    5      AMD Radeon (TM) RX 480 Graphics   0%   57      42%      W    50% 1077Mhz 2000Mhz


Appuyez sur une touche pour continuer...

the column "Power *" is empty and I do not know how to integrate this value in MM. If you know how to do it, I'm interested.
thank you

Test last github master code, It must be shown.

[warnerdark]

Hello minors

I mine with 6 rx480 and I have a power value concern. During the mining I did not have the "PowerAvg" indicated.
Is there a way to integrate this value with a specific setting in the "config.txt" or should we change the "core.ps1" in order to get this value from the rx480 cards

Thank you in advance for your answers
ps: a big thank you for this system

Please execute Gpulist.bat and post exit.

here are the informations you asked me



   Type : NVIDIA

GpuId GpuGroup Name
----- -------- ----
    0          NVIDIA-SMI couldn't find nvml.dll library in your system. Please make sure that the NVIDIA Display
               Driver is properly installed and present in your system.
    1          Please also try adding directory that contains nvml.dll to your system PATH.




   Type : AMD

GpuId GpuGroup Name                         Gpu Temp FanSpeed Power* PowLmt  ClkGpu  ClkMem
----- -------- ----                         --- ---- -------- ------ ------  ------  ------
    0      AMD Radeon (TM) RX 480 Graphics 100%   66      53%      W    50% 1113Mhz 2000Mhz
    1      AMD Radeon (TM) RX 480 Graphics 100%   63      46%      W    50% 1140Mhz 2000Mhz
    2      AMD Radeon (TM) RX 480 Graphics 100%   64      46%      W    50% 1091Mhz 2000Mhz
    3      AMD Radeon (TM) RX 480 Graphics   0%   63      53%      W    50% 1131Mhz 2000Mhz
    4      AMD Radeon (TM) RX 480 Graphics 100%   62      47%      W    50% 1025Mhz 2000Mhz
    5      AMD Radeon (TM) RX 480 Graphics   0%   57      42%      W    50% 1077Mhz 2000Mhz


Appuyez sur une touche pour continuer...

the column "Power *" is empty and I do not know how to integrate this value in MM. If you know how to do it, I'm interested.
thank you

Test last github master code, It must be shown.

after direct start of the "master code", I have a launch problem after the choice "0 MINE AUTOMATIC" (I tried the other choices and it does the same thing)
here are the errors when starting "start.bat"
being a beginner I do not understand the error and how to fix it

Code:

-------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------  SELECT OPTION  ------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------

Option Mode              Explanation
------ ----              -----------
     0 MINE AUTOMATIC    Not necesary choose coin to mine, program choose more profitable coin based on pool´s curre...
     1 MINE AUTOMATIC24h Same as Automatic mode but based on pools/WTM reported last 24h profit
     2 MINE MANUAL       You select coin to mine
     3 FARM MONITORING   I only want to see my rigs state


SELECT ONE OPTION:: 0
SELECTED OPTION::MINE AUTOMATIC
Add-Member : Impossible de lier l'argument au paramètre « InputObject », car il a la valeur Null.
Au caractère D:\temp\Megaminer-master\Megaminer.ps1:73 : 30
+                     $Pools | Add-Member Option "0"
+                              ~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidData : (:) [Add-Member], ParameterBindingValidationException
    + FullyQualifiedErrorId : ParameterArgumentValidationErrorNullNotAllowed,Microsoft.PowerShell.Commands.AddMemberCom
   mand

La propriété « Option » est introuvable dans cet objet. Vérifiez qu’elle existe et qu’elle peut être définie.
Au caractère D:\temp\Megaminer-master\Megaminer.ps1:76 : 29
+                             $_.Option=$counter
+                             ~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation : (:) [], RuntimeException
    + FullyQualifiedErrorId : PropertyNotFound

-------------------------------------------------------------------------------------------------------------------------
----------------------------------------------  SELECT POOL/S  TO MINE  -------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------

option name      rewardtype Disclaimer
------ ----      ---------- ----------
    99 ALL POOLS


SELECT OPTION/S (separated by comma)::

[tutulfo]

Hello minors

I mine with 6 rx480 and I have a power value concern. During the mining I did not have the "PowerAvg" indicated.
Is there a way to integrate this value with a specific setting in the "config.txt" or should we change the "core.ps1" in order to get this value from the rx480 cards

Thank you in advance for your answers
ps: a big thank you for this system

Please execute Gpulist.bat and post exit.

here are the informations you asked me



   Type : NVIDIA

GpuId GpuGroup Name
----- -------- ----
    0          NVIDIA-SMI couldn't find nvml.dll library in your system. Please make sure that the NVIDIA Display
               Driver is properly installed and present in your system.
    1          Please also try adding directory that contains nvml.dll to your system PATH.




   Type : AMD

GpuId GpuGroup Name                         Gpu Temp FanSpeed Power* PowLmt  ClkGpu  ClkMem
----- -------- ----                         --- ---- -------- ------ ------  ------  ------
    0      AMD Radeon (TM) RX 480 Graphics 100%   66      53%      W    50% 1113Mhz 2000Mhz
    1      AMD Radeon (TM) RX 480 Graphics 100%   63      46%      W    50% 1140Mhz 2000Mhz
    2      AMD Radeon (TM) RX 480 Graphics 100%   64      46%      W    50% 1091Mhz 2000Mhz
    3      AMD Radeon (TM) RX 480 Graphics   0%   63      53%      W    50% 1131Mhz 2000Mhz
    4      AMD Radeon (TM) RX 480 Graphics 100%   62      47%      W    50% 1025Mhz 2000Mhz
    5      AMD Radeon (TM) RX 480 Graphics   0%   57      42%      W    50% 1077Mhz 2000Mhz


Appuyez sur une touche pour continuer...

the column "Power *" is empty and I do not know how to integrate this value in MM. If you know how to do it, I'm interested.
thank you

Test last github master code, It must be shown.

after direct start of the "master code", I have a launch problem after the choice "0 MINE AUTOMATIC" (I tried the other choices and it does the same thing)
here are the errors when starting "start.bat"
being a beginner I do not understand the error and how to fix it

Code:

-------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------  SELECT OPTION  ------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------

Option Mode              Explanation
------ ----              -----------
     0 MINE AUTOMATIC    Not necesary choose coin to mine, program choose more profitable coin based on pool´s curre...
     1 MINE AUTOMATIC24h Same as Automatic mode but based on pools/WTM reported last 24h profit
     2 MINE MANUAL       You select coin to mine
     3 FARM MONITORING   I only want to see my rigs state


SELECT ONE OPTION:: 0
SELECTED OPTION::MINE AUTOMATIC
Add-Member : Impossible de lier l'argument au paramètre « InputObject », car il a la valeur Null.
Au caractère D:\temp\Megaminer-master\Megaminer.ps1:73 : 30
+                     $Pools | Add-Member Option "0"
+                              ~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidData : (:) [Add-Member], ParameterBindingValidationException
    + FullyQualifiedErrorId : ParameterArgumentValidationErrorNullNotAllowed,Microsoft.PowerShell.Commands.AddMemberCom
   mand

La propriété « Option » est introuvable dans cet objet. Vérifiez qu’elle existe et qu’elle peut être définie.
Au caractère D:\temp\Megaminer-master\Megaminer.ps1:76 : 29
+                             $_.Option=$counter
+                             ~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation : (:) [], RuntimeException
    + FullyQualifiedErrorId : PropertyNotFound

-------------------------------------------------------------------------------------------------------------------------
----------------------------------------------  SELECT POOL/S  TO MINE  -------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------

option name      rewardtype Disclaimer
------ ----      ---------- ----------
    99 ALL POOLS


SELECT OPTION/S (separated by comma)::

True, fixed in github master code

[tutulfo]

6.1 Release


---FEATURES CHANGES:
*Rest Api available
*New utility for Farm rigs monitoring/alert (see config.txt)
*Added menu option to quit (close all windows)
*Activity based watchdog disabled if no gpu detected (https://github.com/tutulino/Megaminer/issues/351)
*Added more killing process retry triying to prevent not closing miners
*Changes .batch examples to allow right click "run as admin"
*Added option to force dynamic miner port allocation to ensure multiple copies of MM can run without flaws
*AMD Enviroment variables included in main program (not necessary setx operations on batch starting files)
*Now when you use a coin level pool without autoexchange (yiimp, bsod, etc) you will see all coins in profits screen, not only indicated config wallet coins.



---POOLS CHANGES:
* Added Bsod.pw pool
* Enhaced Whattomine pool (less api call, more acurate data)
* Added  europe location for Zergpool
* Zergpool lost coin level mining, now algo level mining due to some coins disabled autoexchange


---MINERS CHANGES:
* Added yescript support
* Added PhoenixMiner for AMD and NVIDIA


---BUG FIXES:

*Fixed: blazepool not showing workername
*Fixed: some miners not downloading
*Fixed: efficiency in €/W not shown for dual minning
*Fixed: pool reported speed and pool workers not shown in active miners section


--RELEASE NOTES
This release changes config.txt variable @@LOCATION (EUROPE--> EU)
This release add config.txt variables @@FORCEDYNAMICPORTS
This release add a new section in config.txt for Farm Monitor

[nitrobg]

Awesome! Will test it ASAP.

Nemosminer Alexis ccminer gives slightly higher hashrate on x17 but it is unstable on some cards with the default intensity. Perhaps you should check it:
https://github.com/nemosminer/ccminerAlexis78/releases/download/3%2F3%2F2018/ccminer-Alexis78.zip