Ethash DAG epoch RX470/480/570/580 FIX !!

[doktor83]

How can this be fixed with a new driver, when they said this hash slowdown occured because of 2gb memory modules being used, and like because not all data can fit in one module, it has to be spread on multiple, so the data read time is increased, hence hash drops.
How can this be fixed with a software ?

[toptek]

I notice miming ETC with the new AMD Crimson ReLive Edition 17.7.2 driver, it only went down one 1 MH @ 141DAG sense etc is that high now.

can't say if that's the drivers  or what, an you need after burner beta 15 or higher 16 is out live now for the drivers to work right with over clocking with afterburner and driver Crimson ReLive Edition 17.7.2.

[Zorg33]

I heard that the AMD Fire Pro 17.Q3 driver already has the DAG size fix.
You can install it for RX 4xx/5xx without a problem AFAIK.

[Marvell1]

confimed to work

and with the latest beta version of AB you can adjust clocks and voltage like before

will send .1 eth

thank you

AMD is back!!! suck it NVIDIA lol

[Marvell1]

I heard that the AMD Fire Pro 17.Q3 driver already has the DAG size fix.
You can install it for RX 4xx/5xx without a problem AFAIK.

I tried the latest fire pro drivers and they would not install on a 480/470 box

[w0lf0.]

nothing change i returned back

[wOvAN]

I've noticed this driver gives also less stales. anyone noticed this also?

[adaseb]

I am pretty sure this guy is some legendary member, he had to make a fake new account probably because he didn't want to get introuble with AMD for pre-releasing these drivers.

I highly doubt a AMD driver can become some executable virus.

[liomojo1]

I can confirm on 470/480/570 that it is working! Tried benchmark 199 and the result is 29mgh not the bloody 16mgh! Good work!

[Piradoxlanieve]

Not compatible with msi afterburner, high consumption, not stable clock speed 

Download New After burner 4.40 beta work fine

[P00P135]

I am pretty sure this guy is some legendary member, he had to make a fake new account probably because he didn't want to get introuble with AMD for pre-releasing these drivers.

I highly doubt a AMD driver can become some executable virus.

Maybe its not a virus but a GPU destroyer?  Watch that difficulty plummet  

[JustCauseBIH]

Why do you bitch about difficulty? U know that nvidia have advantage and with this everyone will have equal earnings?

[Ursul0]

works fine. thanks a lot.
straight forward. but these new crap apis are shit.
need afterburner to lower -100mv on all and underclock core & overclock mem in claymore config.
back to 28mh dual on etc.  
using amd internal fans control, yet cannot set my target temps - any ideas?
updated watttool anyone?

2*480 msi refs + 2*470 refs (Hynix+Samsung) + 470 Nitro+

[P00P135]

Why do you bitch about difficulty? U know that nvidia have advantage and with this everyone will have equal earnings?

Are you talking to me?  I'm not bitching.  I was suggesting the difficulty will plummet after all the AMD GPU's go offline because this "driver" might fry them.

[smparo]

This is my first message! 

I try the driver and it's ok, my ring is two RX 580, from 56.8Mh/s I go to 61.5Mh/s (mining only eth - bios modded for gpu/memory frequency/voltage and memory time... so I don't use any app for set this)
The card is set to go at 1150 gpu/2200 memory/900mV

I notice more share on ethermine (demonstration of the increased Mh/s) and for the stale there is no changes. My average effective hashrate was 51.8/51.9, now is 52.4 (driver was installed at 17:30 Rome time so I hop go up in the night)

On the system before install the driver I have installed 17.7.2 (driver version 22.19.662.4 from device manager). This one install version 22.19.659.1 

So thanks! 

[Bwtmn7]

How can this be fixed with a new driver, when they said this hash slowdown occured because of 2gb memory modules being used, and like because not all data can fit in one module, it has to be spread on multiple, so the data read time is increased, hence hash drops.
How can this be fixed with a software ?

This doesnt apply for HBM i doubt is about memory modules.

[Metroid]

Any way to under voltage core on afterburner more than -96? If not then is a problem.

[khaledraw]

i have rx 470 4g spphire+ and afterburner 4.4 beta 16 don't increase m clock higher than 1300 !!!
i enabled extend  overclocking limit with no change

[Ursul0]

Guys.. better if you wait for an official release from AMD then using drivers from unknown source

two more chars and I would think that you are on a signature campaign. but then I noticed that it's not you.
so why is that? please explain.

[Ursul0]

i have rx 470 4g spphire+ and afterburner 4.4 beta 16 don't increase m clock higher than 1300 !!!
i enabled extend  overclocking limit with no change

you better disable that back from afterburner gui and use it only to lower the volts. set frequencies with claymores miner -mclock, -cclock