adaseb
Legendary
Offline
Activity: 3850
Merit: 1731
Up to 300% + 200 FS deposit bonuses
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2020, 04:53:35 AM |
|
Wow, regardless of what others are saying about W7 being too old...well it is but that's besides the point. Some of us have legit reasons as to why some of our systems are still W7, so relax.
Just to confirm though that even though I am forced to use W7 on one of my systems that I have been able to successfully hash at a pretty decent speed.
8GB 580 XHV @850H/s vs. 200H/s with the latest Adrenaline drivers RVN @11.5MH/s vs. 9MH/s with the latest Adrenaline drivers
I'm still working on Phoenix with W7 to test my ETH speeds but for now I'm content with XHV.
I downloaded robinh00d's 7z files and extracted them which were actually version 22.19.659.1 drivers and the atikmdag-patcher as he described.
I then downloaded the AMD-Compute-Switcher and walla!
This has taken me a few weeks to figure this out and I know that W10 would have been far easier but that simply is not an option for this instance.
Now my mission is to figure out fan control as 68 degrees with only 34% fan speed is not good. OverdriveNTool does not seem to work in W7 regardless of what version I attempt with whatever AMD driver versions. However so far this is a step in the right direction. Any suggestions on GPU fan control within W7 would be welcome.
Yes, use MSI Afterburner and it will work with setting the fan speeds and clock rates. If you need to undervolt then you need to use WattMan. I used this setup for years without issue. I stopped using Win7 due to the 4GB dag not loading anymore but its still possible to mine with 8GB cards. I am curious why you are using "AMD Compute Switcher" when the robinhood drivers pretty much have the compute mode enabled, that's why those drivers were released. With AMD drivers for Win7, none of them had the compute option unless it was Win10, so you were forced to use robinhood drivers. So with robinhood drivers you don't need the Compute switcher.
|
|
|
|
babnero
Newbie
Offline
Activity: 7
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 19, 2021, 11:56:18 AM |
|
Hi I know is been a long time this topic have been updated but please I really need help on drivers that will work on windows 7 for amd graphics card. all nvidia graphics cards works good but I have rx 580 8gb 2048sp am only getting 8 m/hs people said I should try windows 10 but I always get error when using it . And I try installing the robinhood driver but it didn't install. Get error not compatible with the operating system. Can someone recommend a driver for me
|
|
|
|
miner29
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 19, 2021, 01:16:13 PM |
|
Hi I know is been a long time this topic have been updated but please I really need help on drivers that will work on windows 7 for amd graphics card. all nvidia graphics cards works good but I have rx 580 8gb 2048sp am only getting 8 m/hs people said I should try windows 10 but I always get error when using it . And I try installing the robinhood driver but it didn't install. Get error not compatible with the operating system. Can someone recommend a driver for me
Try compute mode…my 570s are all still getting 30+ mhs on eth with no need for hacked drivers. There is no need for a hacked up driver.
|
|
|
|
adaseb
Legendary
Offline
Activity: 3850
Merit: 1731
Up to 300% + 200 FS deposit bonuses
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 19, 2021, 03:56:14 PM |
|
Try compute mode…my 570s are all still getting 30+ mhs on eth with no need for hacked drivers. There is no need for a hacked up driver.
There is no compute mode option with the AMD drivers if he is using Windows 7. The option is there for Windows 10, however for Windows 7 AMD never included that option. If he wants to use RX series GPUs and Windows 7, he needs to use the robinh00d drivers. My advice for the prior post is, you need to install some old AMD driver version from like 2016/2017, and then go to your display drivers and click on update driver and point to the robinh00d directory and it should install. Sometimes it freezes but 5-10 minutes later it should be installed. You might need to do this for every GPU inside your system. However keep in mind that you got a max 4 GPU limit under Windows 7.
|
|
|
|
Metroid
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 2142
Merit: 353
Xtreme Monster
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 19, 2021, 05:22:08 PM |
|
Legendary user for have provided us with this driver, I guess this user works for amd and miners around here were the guinea pigs ehhe, anyway, this driver has not been of any usage for quite sometime, dont bother, download the new amd drivers.
|
BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
|
|
|
DrX
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 233
Merit: 20
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 19, 2021, 05:33:40 PM |
|
Try compute mode…my 570s are all still getting 30+ mhs on eth with no need for hacked drivers. There is no need for a hacked up driver.
There is no compute mode option with the AMD drivers if he is using Windows 7. The option is there for Windows 10, however for Windows 7 AMD never included that option. If he wants to use RX series GPUs and Windows 7, he needs to use the robinh00d drivers. My advice for the prior post is, you need to install some old AMD driver version from like 2016/2017, and then go to your display drivers and click on update driver and point to the robinh00d directory and it should install. Sometimes it freezes but 5-10 minutes later it should be installed. You might need to do this for every GPU inside your system. However keep in mind that you got a max 4 GPU limit under Windows 7. Little bit pointless but there is 6 gpu hack for Win7 https://lbr.id.lv/6xgpu_mod/I would use win10 or linux
|
|
|
|
babnero
Newbie
Offline
Activity: 7
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 19, 2021, 06:43:17 PM |
|
Try compute mode…my 570s are all still getting 30+ mhs on eth with no need for hacked drivers. There is no need for a hacked up driver.
There is no compute mode option with the AMD drivers if he is using Windows 7. The option is there for Windows 10, however for Windows 7 AMD never included that option. If he wants to use RX series GPUs and Windows 7, he needs to use the robinh00d drivers. My advice for the prior post is, you need to install some old AMD driver version from like 2016/2017, and then go to your display drivers and click on update driver and point to the robinh00d directory and it should install. Sometimes it freezes but 5-10 minutes later it should be installed. You might need to do this for every GPU inside your system. However keep in mind that you got a max 4 GPU limit under Windows 7. OK let me try and see thanks
|
|
|
|
FP91G
Legendary
Offline
Activity: 1750
Merit: 1078
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2021, 11:54:44 AM |
|
Hi I know is been a long time this topic have been updated but please I really need help on drivers that will work on windows 7 for amd graphics card. all nvidia graphics cards works good but I have rx 580 8gb 2048sp am only getting 8 m/hs people said I should try windows 10 but I always get error when using it . And I try installing the robinhood driver but it didn't install. Get error not compatible with the operating system. Can someone recommend a driver for me
Install the Hive OS on the USB flash drive and configure the mining. At the same time, you will also check your video card. I would figure out why you have errors in Windows 10. If the video card is in good working order, then there should be no errors. But for mining on Windows 10, I recommend using the 2019 version.
|
█████████████████████████ ████████▀▀████▀▀█▀▀██████ █████▀████▄▄▄▄██████▀████ ███▀███▄████████▄████▀███ ██▀███████████████████▀██ █████████████████████████ █████████████████████████ █████████████████████████ ██▄███████████████▀▀▄▄███ ███▄███▀████████▀███▄████ █████▄████▀▀▀▀████▄██████ ████████▄▄████▄▄█████████ █████████████████████████ | BitList | | █▀▀▀▀ █ █ █ █ █ █ █ █ █ █ █ █▄▄▄▄ | ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ . REAL-TIME DATA TRACKING CURATED BY THE COMMUNITY . ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ | ▀▀▀▀█ █ █ █ █ █ █ █ █ █ █ █ ▄▄▄▄█ | | List #kycfree Websites |
|
|
|
babnero
Newbie
Offline
Activity: 7
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2021, 05:07:25 PM |
|
I did install hiveos but only the rx 580 shows up I also have gigabyte gtx 1070ti which didn't shows up in hiveos even nicehash other nvidia card works very well on windows 7 about three nvidia but the rx 580 8gb didn't even on windows 10 I get error 43
|
|
|
|
DrX
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 233
Merit: 20
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 21, 2021, 07:25:44 AM |
|
I did install hiveos but only the rx 580 shows up I also have gigabyte gtx 1070ti which didn't shows up in hiveos even nicehash other nvidia card works very well on windows 7 about three nvidia but the rx 580 8gb didn't even on windows 10 I get error 43
RX580 bios modded? did you run AMD/ATI Pixel Clock Patcher? (By ToastyX from monitortests.com)
|
|
|
|
babnero
Newbie
Offline
Activity: 7
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 21, 2021, 07:44:58 AM |
|
Yes I did but it only worked in windows 7 after I get the error but didn't work on windows 10 I did install hiveos but only the rx 580 shows up I also have gigabyte gtx 1070ti which didn't shows up in hiveos even nicehash other nvidia card works very well on windows 7 about three nvidia but the rx 580 8gb didn't even on windows 10 I get error 43
RX580 bios modded? did you run AMD/ATI Pixel Clock Patcher? (By ToastyX from monitortests.com)
|
|
|
|
FP91G
Legendary
Offline
Activity: 1750
Merit: 1078
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 22, 2021, 02:39:38 PM |
|
Yes I did but it only worked in windows 7 after I get the error but didn't work on windows 10 I did install hiveos but only the rx 580 shows up I also have gigabyte gtx 1070ti which didn't shows up in hiveos even nicehash other nvidia card works very well on windows 7 about three nvidia but the rx 580 8gb didn't even on windows 10 I get error 43
RX580 bios modded? did you run AMD/ATI Pixel Clock Patcher? (By ToastyX from monitortests.com) Some miracles happen to you. In one operating system, the video card is detected and in the other not. I have rarely seen this. Check the power supply, raiser and write your hardware configuration, because it is very difficult to be psychic. For an AMD video card, you need to install drivers that will be newer than May 2020, because the problem of a 4 GB dag file is solved there.
|
█████████████████████████ ████████▀▀████▀▀█▀▀██████ █████▀████▄▄▄▄██████▀████ ███▀███▄████████▄████▀███ ██▀███████████████████▀██ █████████████████████████ █████████████████████████ █████████████████████████ ██▄███████████████▀▀▄▄███ ███▄███▀████████▀███▄████ █████▄████▀▀▀▀████▄██████ ████████▄▄████▄▄█████████ █████████████████████████ | BitList | | █▀▀▀▀ █ █ █ █ █ █ █ █ █ █ █ █▄▄▄▄ | ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ . REAL-TIME DATA TRACKING CURATED BY THE COMMUNITY . ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ | ▀▀▀▀█ █ █ █ █ █ █ █ █ █ █ █ ▄▄▄▄█ | | List #kycfree Websites |
|
|
|
babnero
Newbie
Offline
Activity: 7
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 25, 2021, 08:14:25 PM |
|
Yes I did but it only worked in windows 7 after I get the error but didn't work on windows 10 I did install hiveos but only the rx 580 shows up I also have gigabyte gtx 1070ti which didn't shows up in hiveos even nicehash other nvidia card works very well on windows 7 about three nvidia but the rx 580 8gb didn't even on windows 10 I get error 43
RX580 bios modded? did you run AMD/ATI Pixel Clock Patcher? (By ToastyX from monitortests.com) Some miracles happen to you. In one operating system, the video card is detected and in the other not. I have rarely seen this. Check the power supply, raiser and write your hardware configuration, because it is very difficult to be psychic. For an AMD video card, you need to install drivers that will be newer than May 2020, because the problem of a 4 GB dag file is solved there. yes the miracle happens on windows 7 64bit after i follow this guide https://www.techinferno.com/index.php?/topic/5874-guide-dsdt-override-to-fix-error-12/ all graphics card works without any errors but only rx 580 that mine at 8.68 MH/s i have the latest drivers install and am using dell studio 1537 intelcore2 dua CPU T6400
|
|
|
|
adaseb
Legendary
Offline
Activity: 3850
Merit: 1731
Up to 300% + 200 FS deposit bonuses
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 28, 2021, 04:07:26 AM |
|
I am confused you said it works on Win7 but not Win10 or do you mean other way around. If you want 30mhs with your RX 580 8gb you need to make sure you did the bios mod with the memory straps.
Then you need to install AMD drivers 16 or 17. After they are installed you use Robinhood drivers in device manager update driver option. Then when windows boots you will get that error and that is when you need the pixel patcher and it should work after that.
Make sure your clocks are correct, memory needs to be at least >1900mhz or higher. Core clock like 1100 or so. And you should get at least >25mhs.
|
|
|
|
babnero
Newbie
Offline
Activity: 7
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 28, 2021, 06:40:01 AM |
|
I am confused you said it works on Win7 but not Win10 or do you mean other way around. If you want 30mhs with your RX 580 8gb you need to make sure you did the bios mod with the memory straps.
Then you need to install AMD drivers 16 or 17. After they are installed you use Robinhood drivers in device manager update driver option. Then when windows boots you will get that error and that is when you need the pixel patcher and it should work after that.
Make sure your clocks are correct, memory needs to be at least >1900mhz or higher. Core clock like 1100 or so. And you should get at least >25mhs.
the rx 580 8gb did not work for me on windows 10 i get error 43 i even bio mod it and also pixel patcher it but i sill get the error, even on windows 7 i get error 43 but after i pixel patcher it then the errors goes away. as you suggest i will try the AMD drivers 16 and see. thanks so much for helping
|
|
|
|
sxemini
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 1558
Merit: 69
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 28, 2021, 10:14:56 AM |
|
I am confused you said it works on Win7 but not Win10 or do you mean other way around. If you want 30mhs with your RX 580 8gb you need to make sure you did the bios mod with the memory straps.
Then you need to install AMD drivers 16 or 17. After they are installed you use Robinhood drivers in device manager update driver option. Then when windows boots you will get that error and that is when you need the pixel patcher and it should work after that.
Make sure your clocks are correct, memory needs to be at least >1900mhz or higher. Core clock like 1100 or so. And you should get at least >25mhs.
the rx 580 8gb did not work for me on windows 10 i get error 43 i even bio mod it and also pixel patcher it but i sill get the error, even on windows 7 i get error 43 but after i pixel patcher it then the errors goes away. as you suggest i will try the AMD drivers 16 and see. thanks so much for helping And you must enable compute mode also to get the full speed for the rx570. Error 43 is pixelclockpatcher, you use it wrong i think. Use DDU to uninsall all driver, reboot, install newer driver 20.9.1 or something newer, use pixelclockpatcher -> reboot. Don´t use robinhood driver, i think it cannot handle this specific version of your rx580.
|
|
|
|
babnero
Newbie
Offline
Activity: 7
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 28, 2021, 02:57:07 PM |
|
I am confused you said it works on Win7 but not Win10 or do you mean other way around. If you want 30mhs with your RX 580 8gb you need to make sure you did the bios mod with the memory straps.
Then you need to install AMD drivers 16 or 17. After they are installed you use Robinhood drivers in device manager update driver option. Then when windows boots you will get that error and that is when you need the pixel patcher and it should work after that.
Make sure your clocks are correct, memory needs to be at least >1900mhz or higher. Core clock like 1100 or so. And you should get at least >25mhs.
the rx 580 8gb did not work for me on windows 10 i get error 43 i even bio mod it and also pixel patcher it but i sill get the error, even on windows 7 i get error 43 but after i pixel patcher it then the errors goes away. as you suggest i will try the AMD drivers 16 and see. thanks so much for helping And you must enable compute mode also to get the full speed for the rx570. Error 43 is pixelclockpatcher, you use it wrong i think. Use DDU to uninsall all driver, reboot, install newer driver 20.9.1 or something newer, use pixelclockpatcher -> reboot. Don´t use robinhood driver, i think it cannot handle this specific version of your rx580. ok i will try again. t even try and amd drives 16 and 17 and i get this Error 182 – Radeon™ Software Install Detected AMD Graphics Hardware in Your System Configuration That Is Not Supported With This Software Installation. so now let me install windows 10 again and try the pixelclockpatcher
|
|
|
|
|