whywefight
Legendary
Offline
Activity: 1078
Merit: 1042
www.explorerz.top
|
|
September 12, 2017, 12:13:58 AM |
|
24h volume picked up again and rate is stable. good to see that
|
|
|
|
kkeylb
Newbie
Offline
Activity: 49
Merit: 0
|
|
September 12, 2017, 01:34:59 AM |
|
Masternode is working, all seems good. I had one question for dev I couldn't find after searching. My vps only has 128 MB RAM, which is always at 99%, on ubuntu, no desktop, putty, etc... Is this RAM OK? I know it's very low. Or will this negatively affect my masternode vps? Please let me know, thanks!
Your masternode's performance will not be affected by your VPS's hardware specifications. However you need to make sure your masternode is indeed running at all times. Use the following command "./vivo-cli masternode status" (without quotes) to check the status of the masternode. It should always say "Masternode successfully started." Monitor your ram regularly to make sure you don't run out of memory, otherwise ubuntu will be forced to kill your masternode process. Use the "free -m" command to see how much ram you have available. Use the following 3 commands to clear unnecessary ram usage: sync su echo 3 > /proc/sys/vm/drop_caches
Then run "free -m" again to check the difference. People are running masternodes on raspberry pi's with less ram than you, you should be fine as long as you optimize your server and keep the ram usage in track. A server configuration with more than 256mb ram would work almost effortlessly. invalid masternoprivkye.Please see documenation. ---What with it to do?? I have transferred to a purse of a masternoda of 1000 coins and in the File of a configuration of an open purse have registered all necessary points in TXT and have kept... now such hogwash at start a purse. HELP p.s. - thanks to all who will help
You need to generate a masternode private key (by using the "./vivo-cli masternode genkey" command) and set it up into your configuration file - as described in the official guides. Vivo Masternode Guide for Linux - https://www.vivocrypto.com/vivo-technologies/masternodes/linux-guide/Vivo Masternode Guide for Windows - https://www.vivocrypto.com/vivo-technologies/masternodes/windows-guide/Just FYI my vps would not allow me to make any swap, nor use the echo line in there, permission denied and whatnot. apparently they vps making you want to buy a better one.
|
|
|
|
whywefight
Legendary
Offline
Activity: 1078
Merit: 1042
www.explorerz.top
|
|
September 12, 2017, 11:55:54 AM |
|
Masternode is working, all seems good. I had one question for dev I couldn't find after searching. My vps only has 128 MB RAM, which is always at 99%, on ubuntu, no desktop, putty, etc... Is this RAM OK? I know it's very low. Or will this negatively affect my masternode vps? Please let me know, thanks!
Your masternode's performance will not be affected by your VPS's hardware specifications. However you need to make sure your masternode is indeed running at all times. Use the following command "./vivo-cli masternode status" (without quotes) to check the status of the masternode. It should always say "Masternode successfully started." Monitor your ram regularly to make sure you don't run out of memory, otherwise ubuntu will be forced to kill your masternode process. Use the "free -m" command to see how much ram you have available. Use the following 3 commands to clear unnecessary ram usage: sync su echo 3 > /proc/sys/vm/drop_caches
Then run "free -m" again to check the difference. People are running masternodes on raspberry pi's with less ram than you, you should be fine as long as you optimize your server and keep the ram usage in track. A server configuration with more than 256mb ram would work almost effortlessly. invalid masternoprivkye.Please see documenation. ---What with it to do?? I have transferred to a purse of a masternoda of 1000 coins and in the File of a configuration of an open purse have registered all necessary points in TXT and have kept... now such hogwash at start a purse. HELP p.s. - thanks to all who will help
You need to generate a masternode private key (by using the "./vivo-cli masternode genkey" command) and set it up into your configuration file - as described in the official guides. Vivo Masternode Guide for Linux - https://www.vivocrypto.com/vivo-technologies/masternodes/linux-guide/Vivo Masternode Guide for Windows - https://www.vivocrypto.com/vivo-technologies/masternodes/windows-guide/Just FYI my vps would not allow me to make any swap, nor use the echo line in there, permission denied and whatnot. apparently they vps making you want to buy a better one. Use my ref link and get a sys at time4vps https://billing.time4vps.eu/?affid=1796XS systems are 1.99 Euro a month and i can run 2 daemons on them. Basically, 1 MN reward pays for the system for a full month.
|
|
|
|
kkeylb
Newbie
Offline
Activity: 49
Merit: 0
|
|
September 12, 2017, 12:05:25 PM |
|
Masternode is working, all seems good. I had one question for dev I couldn't find after searching. My vps only has 128 MB RAM, which is always at 99%, on ubuntu, no desktop, putty, etc... Is this RAM OK? I know it's very low. Or will this negatively affect my masternode vps? Please let me know, thanks!
Your masternode's performance will not be affected by your VPS's hardware specifications. However you need to make sure your masternode is indeed running at all times. Use the following command "./vivo-cli masternode status" (without quotes) to check the status of the masternode. It should always say "Masternode successfully started." Monitor your ram regularly to make sure you don't run out of memory, otherwise ubuntu will be forced to kill your masternode process. Use the "free -m" command to see how much ram you have available. Use the following 3 commands to clear unnecessary ram usage: sync su echo 3 > /proc/sys/vm/drop_caches
Then run "free -m" again to check the difference. People are running masternodes on raspberry pi's with less ram than you, you should be fine as long as you optimize your server and keep the ram usage in track. A server configuration with more than 256mb ram would work almost effortlessly. invalid masternoprivkye.Please see documenation. ---What with it to do?? I have transferred to a purse of a masternoda of 1000 coins and in the File of a configuration of an open purse have registered all necessary points in TXT and have kept... now such hogwash at start a purse. HELP p.s. - thanks to all who will help
You need to generate a masternode private key (by using the "./vivo-cli masternode genkey" command) and set it up into your configuration file - as described in the official guides. Vivo Masternode Guide for Linux - https://www.vivocrypto.com/vivo-technologies/masternodes/linux-guide/Vivo Masternode Guide for Windows - https://www.vivocrypto.com/vivo-technologies/masternodes/windows-guide/Just FYI my vps would not allow me to make any swap, nor use the echo line in there, permission denied and whatnot. apparently they vps making you want to buy a better one. Use my ref link and get a sys at time4vps https://billing.time4vps.eu/?affid=1796XS systems are 1.99 Euro a month and i can run 2 daemons on them. Basically, 1 MN reward pays for the system for a full month. Yeah I got a super cheap one at virmach for $7.50/yr, but the ram is so bad, it might shut the MN down or something, it's always at 99% RAM. If it does god own, I will switch
|
|
|
|
Crypto_Profits
Full Member
Offline
Activity: 132
Merit: 100
-->BUY-->HODL-->SELL-->REPEAT-->
|
|
September 12, 2017, 02:35:29 PM |
|
This coin should get a nice pump when it gets listed on coinmarketcap
|
|
|
|
AltMiner.net
Full Member
Offline
Activity: 210
Merit: 100
AltMiner.Net | Low-Fee Pool | 2hr Payout
|
|
September 12, 2017, 03:03:17 PM |
|
🛠 Mining pool update 🛠
https://altminer.netLow latency, scalable and secure mining pool infrastructure Currently only 0.45% fee (PROMO) Automatic payouts every 120 minutes No registration required
AltMiner.net was also attacked by the recent yiimp hacks (further information here: https://bitcointalk.org/index.php?topic=2163058.0) We were offline several days securing our servers, recreating all wallets and adding several additional layers of security. Not only we have now added an intrustion prevention system with anomaly detection, we also added DDoS protection and several further measures. Now we think it is again safe to mine with us and we thank you for your patience during those hard days. As a bonus for your trust we currently have lowered all fees to only 0.45%! If you have any questions feel free to contact us! ▶️▶️▶️ How to mine❓Use the following parameters at your preferred mining software (replace WALLET with your wallet address): -a neoscrypt -o stratum+tcp://eu1.altminer.net:4233 -u WALLET -p c=VIVO
|
|
|
|
Papiruc
Newbie
Offline
Activity: 33
Merit: 0
|
|
September 12, 2017, 05:59:23 PM |
|
Thanks to all you!! I have made everything according to the instruction, it seems, has to work... writes: -bash: ./vivo-cli: No such file or directory Can still just early? I have only confirmed 1000VIVO
|
|
|
|
Crypto_Profits
Full Member
Offline
Activity: 132
Merit: 100
-->BUY-->HODL-->SELL-->REPEAT-->
|
|
September 12, 2017, 06:09:40 PM |
|
|
|
|
|
whywefight
Legendary
Offline
Activity: 1078
Merit: 1042
www.explorerz.top
|
|
September 12, 2017, 06:51:21 PM |
|
Thanks to all you!! I have made everything according to the instruction, it seems, has to work... writes: -bash: ./vivo-cli: No such file or directory Can still just early? I have only confirmed 1000VIVO
you are in the wrong directory. did you follow the instructions here: http://www.explorerz.top/vivo-mn.html
|
|
|
|
hic78
Member
Offline
Activity: 107
Merit: 10
|
|
September 12, 2017, 06:54:40 PM |
|
hello one should also put it on masternode pro
|
|
|
|
Papiruc
Newbie
Offline
Activity: 33
Merit: 0
|
|
September 12, 2017, 06:58:36 PM |
|
hurrah) I understood... missed point - "apt-get install software-properties-common nano libboost-all-dev libzmq3-dev libminiupnpc-dev libssl-dev libevent-dev" gave this))
|
|
|
|
chuychuy
Newbie
Offline
Activity: 10
Merit: 0
|
|
September 12, 2017, 06:59:14 PM |
|
How about your develper team? Who are you?
|
|
|
|
peachcakey (OP)
|
|
September 12, 2017, 07:00:03 PM |
|
Yes, indeed! Masternodes.pro will come soon as well. We are communicating with them.
|
|
|
|
hic78
Member
Offline
Activity: 107
Merit: 10
|
|
September 12, 2017, 07:02:43 PM |
|
perfect ^^
|
|
|
|
Cryptarded
Newbie
Offline
Activity: 26
Merit: 0
|
|
September 12, 2017, 07:47:09 PM |
|
Nice to see Vivo on coinmarketcap and the price is reflecting that
|
|
|
|
nicog5
Newbie
Offline
Activity: 64
Merit: 0
|
|
September 12, 2017, 08:17:54 PM |
|
Last day I noticed that confirmation of mined or sent coins takes much more time as it was 1 or 2 days ago. Can it be only my problem or is it something else? BTW great pump! That's awesome!
|
|
|
|
PowerHemp
Legendary
Offline
Activity: 1386
Merit: 1001
Ganja <3
|
|
September 12, 2017, 08:29:24 PM |
|
i will watch this
|
|
|
|
atrade06
Newbie
Offline
Activity: 5
Merit: 0
|
|
September 12, 2017, 08:35:41 PM |
|
It is necessary to make that the complexity changed each block. wise people are bored with the capacities of nicehash, because of them the transactions are very slow!
|
|
|
|
wupyk
Newbie
Offline
Activity: 24
Merit: 0
|
|
September 12, 2017, 08:39:02 PM |
|
Very slow transactions , was 1 week ago 30-40 min. Now its 4h-5h ?
|
|
|
|
peachcakey (OP)
|
|
September 12, 2017, 09:24:29 PM |
|
It is necessary to make that the complexity changed each block. wise people are bored with the capacities of nicehash, because of them the transactions are very slow!
We are releasing an update shortly that will address and correct this. It will be announced in the next couple of days.
|
|
|
|
|