[ANN] VIVO - Masternodes, ASIC-Resistant, Secure, High MN Rewards, Decentralized

[whywefight]

24h volume picked up again and rate is stable. good to see that 

[kkeylb]

Masternode is working, all seems good. I had one question for dev I couldn't find after searching. My vps only has 128 MB RAM, which is always at 99%, on ubuntu, no desktop, putty, etc... Is this RAM OK? I know it's very low. Or will this negatively affect my masternode vps?
Please let me know, thanks!

Your masternode's performance will not be affected by your VPS's hardware specifications. However you need to make sure your masternode is indeed running at all times. Use the following command "./vivo-cli masternode status" (without quotes) to check the status of the masternode. It should always say "Masternode successfully started."

Monitor your ram regularly to make sure you don't run out of memory, otherwise ubuntu will be forced to kill your masternode process. Use the "free -m" command to see how much ram you have available.

Use the following 3 commands to clear unnecessary ram usage:

Code:

sync
su
echo 3 > /proc/sys/vm/drop_caches

Then run "free -m" again to check the difference. People are running masternodes on raspberry pi's with less ram than you, you should be fine as long as you optimize your server and keep the ram usage in track. A server configuration with more than 256mb ram would work almost effortlessly.

invalid masternoprivkye.Please see documenation.     ---What with it to do?? I have transferred to a purse of a masternoda of 1000 coins and in the File of a configuration of an open purse have registered all necessary points in TXT and have kept... now such hogwash at start a purse. HELP p.s. - thanks to all who will help

You need to generate a masternode private key (by using the "./vivo-cli masternode genkey" command) and set it up into your configuration file - as described in the official guides.

Vivo Masternode Guide for Linux - https://www.vivocrypto.com/vivo-technologies/masternodes/linux-guide/
Vivo Masternode Guide for Windows - https://www.vivocrypto.com/vivo-technologies/masternodes/windows-guide/

Just FYI my vps would not allow me to make any swap, nor use the echo line in there, permission denied and whatnot. apparently they vps making you want to buy a better one.

[whywefight]

Masternode is working, all seems good. I had one question for dev I couldn't find after searching. My vps only has 128 MB RAM, which is always at 99%, on ubuntu, no desktop, putty, etc... Is this RAM OK? I know it's very low. Or will this negatively affect my masternode vps?
Please let me know, thanks!

Your masternode's performance will not be affected by your VPS's hardware specifications. However you need to make sure your masternode is indeed running at all times. Use the following command "./vivo-cli masternode status" (without quotes) to check the status of the masternode. It should always say "Masternode successfully started."

Monitor your ram regularly to make sure you don't run out of memory, otherwise ubuntu will be forced to kill your masternode process. Use the "free -m" command to see how much ram you have available.

Use the following 3 commands to clear unnecessary ram usage:

Code:

sync
su
echo 3 > /proc/sys/vm/drop_caches

Then run "free -m" again to check the difference. People are running masternodes on raspberry pi's with less ram than you, you should be fine as long as you optimize your server and keep the ram usage in track. A server configuration with more than 256mb ram would work almost effortlessly.

invalid masternoprivkye.Please see documenation.     ---What with it to do?? I have transferred to a purse of a masternoda of 1000 coins and in the File of a configuration of an open purse have registered all necessary points in TXT and have kept... now such hogwash at start a purse. HELP p.s. - thanks to all who will help

You need to generate a masternode private key (by using the "./vivo-cli masternode genkey" command) and set it up into your configuration file - as described in the official guides.

Vivo Masternode Guide for Linux - https://www.vivocrypto.com/vivo-technologies/masternodes/linux-guide/
Vivo Masternode Guide for Windows - https://www.vivocrypto.com/vivo-technologies/masternodes/windows-guide/

Just FYI my vps would not allow me to make any swap, nor use the echo line in there, permission denied and whatnot. apparently they vps making you want to buy a better one.

Use my ref link and get a sys at time4vps https://billing.time4vps.eu/?affid=1796

XS systems are 1.99 Euro a month and i can run 2 daemons on them. Basically, 1 MN reward pays for the system for a full month.

[kkeylb]

Masternode is working, all seems good. I had one question for dev I couldn't find after searching. My vps only has 128 MB RAM, which is always at 99%, on ubuntu, no desktop, putty, etc... Is this RAM OK? I know it's very low. Or will this negatively affect my masternode vps?
Please let me know, thanks!

Your masternode's performance will not be affected by your VPS's hardware specifications. However you need to make sure your masternode is indeed running at all times. Use the following command "./vivo-cli masternode status" (without quotes) to check the status of the masternode. It should always say "Masternode successfully started."

Monitor your ram regularly to make sure you don't run out of memory, otherwise ubuntu will be forced to kill your masternode process. Use the "free -m" command to see how much ram you have available.

Use the following 3 commands to clear unnecessary ram usage:

Code:

sync
su
echo 3 > /proc/sys/vm/drop_caches

Then run "free -m" again to check the difference. People are running masternodes on raspberry pi's with less ram than you, you should be fine as long as you optimize your server and keep the ram usage in track. A server configuration with more than 256mb ram would work almost effortlessly.

invalid masternoprivkye.Please see documenation.     ---What with it to do?? I have transferred to a purse of a masternoda of 1000 coins and in the File of a configuration of an open purse have registered all necessary points in TXT and have kept... now such hogwash at start a purse. HELP p.s. - thanks to all who will help

You need to generate a masternode private key (by using the "./vivo-cli masternode genkey" command) and set it up into your configuration file - as described in the official guides.

Vivo Masternode Guide for Linux - https://www.vivocrypto.com/vivo-technologies/masternodes/linux-guide/
Vivo Masternode Guide for Windows - https://www.vivocrypto.com/vivo-technologies/masternodes/windows-guide/

Just FYI my vps would not allow me to make any swap, nor use the echo line in there, permission denied and whatnot. apparently they vps making you want to buy a better one.

Use my ref link and get a sys at time4vps https://billing.time4vps.eu/?affid=1796

XS systems are 1.99 Euro a month and i can run 2 daemons on them. Basically, 1 MN reward pays for the system for a full month.

Yeah I got a super cheap one at virmach for $7.50/yr, but the ram is so bad, it might shut the MN down or something, it's always at 99% RAM. If it does god own, I will switch

[Crypto_Profits]

This coin should get a nice pump when it gets listed on coinmarketcap

[AltMiner.net]

🛠 Mining pool update 🛠

https://altminer.net
Low latency, scalable and secure mining pool infrastructure
Currently only 0.45% fee (PROMO)
Automatic payouts every 120 minutes
No registration required

AltMiner.net was also attacked by the recent yiimp hacks (further information here: https://bitcointalk.org/index.php?topic=2163058.0)
We were offline several days securing our servers, recreating all wallets and adding several additional layers of security. Not only we have now added an intrustion prevention system with anomaly detection, we also added DDoS protection and several further measures.

Now we think it is again safe to mine with us and we thank you for your patience during those hard days. As a bonus for your trust we currently have lowered all fees to only 0.45%!

If you have any questions feel free to contact us!

▶️▶️▶️ How to mine❓
Use the following parameters at your preferred mining software (replace WALLET with your wallet address):

Code:

-a neoscrypt -o stratum+tcp://eu1.altminer.net:4233 -u WALLET -p c=VIVO

[Papiruc]

Thanks to all you!!
I have made everything according to the instruction, it seems, has to work... writes:
-bash: ./vivo-cli: No such file or directory
Can still just early? I have only confirmed 1000VIVO

[Crypto_Profits]

VIVO IS ON COINMARKETCAP!

https://coinmarketcap.com/currencies/vivo/#markets

[whywefight]

Thanks to all you!!
I have made everything according to the instruction, it seems, has to work... writes:
-bash: ./vivo-cli: No such file or directory
Can still just early? I have only confirmed 1000VIVO

you are in the wrong directory. did you follow the instructions here: http://www.explorerz.top/vivo-mn.html

[hic78]

hello one should also put it on
masternode pro

[Papiruc]

hurrah) I understood... missed point -
"apt-get install software-properties-common nano libboost-all-dev libzmq3-dev libminiupnpc-dev libssl-dev libevent-dev"
gave this))

[chuychuy]

How about your develper team? Who are you?

[peachcakey]

VIVO IS ON COINMARKETCAP!

https://coinmarketcap.com/currencies/vivo/#markets

Yes, indeed! Masternodes.pro will come soon as well. We are communicating with them.

[hic78]

perfect ^^

[Cryptarded]

Nice to see Vivo on coinmarketcap and the price is reflecting that 

[nicog5]

Last day I noticed that confirmation of mined or sent coins takes much more time as it was 1 or 2 days ago.
Can it be only my problem or is it something else?
BTW great pump! That's awesome!

[PowerHemp]

i will watch this 

[atrade06]

It is necessary to make that the complexity changed each block. wise people are bored with the capacities of nicehash, because of them the transactions are very slow!

[wupyk]

Very slow transactions , was 1 week ago 30-40 min. Now its 4h-5h ?

[peachcakey]

It is necessary to make that the complexity changed each block. wise people are bored with the capacities of nicehash, because of them the transactions are very slow!

We are releasing an update shortly that will address and correct this. It will be announced in the next couple of days.