ir.hn
Member
Offline
Activity: 322
Merit: 54
Consensus is Constitution
|
|
December 06, 2017, 07:01:15 PM |
|
Dev please look over my post about adding wallet funcionality so people can encode a crowd-sourced exchange into the blockchain using op_return. The full text of my whitepaper is included in the comments on the forum post https://bitcointalk.org/index.php?topic=2521788.msg25870369#msg25870369
|
|
|
|
eule
|
|
December 06, 2017, 07:42:24 PM Last edit: December 06, 2017, 10:28:58 PM by eule |
|
Finally got my Odroid XU3 lite mining by compiling yentend, wasn't able to compile cpuminer-opt. Is the source of minerd available somewhere? Mining on 7 of 8 cores at 93°C, Hashrate reports vary wildly: most often it's around 63 but rarely it's reported as 0 or up to 140, probably some kind of lag. Not too bad for an ARM CPU (Exynos 5422), OS is Debian Wheezy. My properly cooled and slightly overclocked FX 8320E does 650 hashes per second btw. Had to configure with --ignore-incompatible-bdb and remove a "-msse41" from yescrypt.h in src/hash/yescrypt. More could be possible with some ARM optimization and compile option tuning, my only CXXFLAG was O3. Too bad the hashrate almost doubled today. Wow nice, I tried to get it working on a pine64 which didn't work and it seemed to be missing x86 type operations so I assumed that yenten required x86 processors. But that is interesting that you got it to work on ARM and not only that but on a non-ubuntu distro. Would you mind writing up a little procedure on how to do it for a linux noob? If this works on ARM it changes everything... Also add up each core's hash/sec to get your total. Found the minerd source at https://github.com/conan-equal-newone/yenten/releases, all I had to do to get running: apt-get install build-essential autotools-dev autoconf libcurl3 libcurl4-gnutls-dev jansson wget https://github.com/conan-equal-newone/yenten/releases/download/1.1.0/yenten_minerd_source.zip unzip yenten_minerd_source.zip Edit line 6 of configure.ac: AM_INIT_AUTOMAKE([gnu foreign]) ./autogen.sh ./configure CFLAGS="-O3 -funroll-loops -fomit-frame-pointer -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard" make strip minerd -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard will be different for most ARM devices, look up the recommended CFLAGS for your device. To build yentend I followed the readme except the two steps mentioned above. The 4 big cores report 0.02kH/s each, the 4 little cores 0.01kH/s. So with proper cooling I would get at least 120H/s, only running the 4 big cores atm.
|
|
|
|
trendvip
Newbie
Offline
Activity: 39
Merit: 0
|
|
December 06, 2017, 08:19:06 PM |
|
Finally got my Odroid XU3 lite mining by compiling yentend, wasn't able to compile cpuminer-opt. Is the source of minerd available somewhere? Mining on 7 of 8 cores at 93°C, Hashrate reports vary wildly: most often it's around 63 but rarely it's reported as 0 or up to 140, probably some kind of lag. Not too bad for an ARM CPU (Exynos 5422), OS is Debian Wheezy. My properly cooled and slightly overclocked FX 8320E does 650 hashes per second btw. Had to configure with --ignore-incompatible-bdb and remove a "-msse41" from yescrypt.h in src/hash/yescrypt. More could be possible with some ARM optimization and compile option tuning, my only CXXFLAG was O3. Too bad the hashrate almost doubled today. Wow nice, I tried to get it working on a pine64 which didn't work and it seemed to be missing x86 type operations so I assumed that yenten required x86 processors. But that is interesting that you got it to work on ARM and not only that but on a non-ubuntu distro. Would you mind writing up a little procedure on how to do it for a linux noob? If this works on ARM it changes everything... Also add up each core's hash/sec to get your total. Found the minerd source at https://github.com/conan-equal-newone/yenten/releases, all I had to do to get running: (sudo) apt-get install libcurl jansson Edit line 6 of configure.ac: AM_INIT_AUTOMAKE([gnu foreign]) ./autogen.sh ./configure CFLAGS="-O3 -funroll-loops -fomit-frame-pointer -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard" make -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard will be different for most ARM devices, look up the recommended CFLAGS for your device. To build yentend I followed the readme except the two steps mentioned above. The 4 big cores report 0.02kH/s each, the 4 little cores 0.01kH/s. So with proper cooling I would get at least 120H/s, only running the 4 big cores atm. Hi, Can you tell me how to edit the "Edit line 6 of configure.ac" via ssh?
|
|
|
|
eule
|
|
December 06, 2017, 08:21:20 PM |
|
Hi, Can you tell me how to edit the "Edit line 6 of configure.ac" via ssh?
With a text editor like nano. apt-get install nano nano configure.ac
Ctrl+X to exit nano.
|
|
|
|
Yannic
|
|
December 06, 2017, 08:26:23 PM Last edit: December 07, 2017, 12:56:51 AM by Yannic |
|
Simple yenten faucet : https://cryptoservices.net/en/ytn-faucetProof-of-Work Captcha 1024: Claim as you want, for each YTN claimed, i will place a bid to rebuy them to support buy price.
|
|
|
|
trendvip
Newbie
Offline
Activity: 39
Merit: 0
|
|
December 06, 2017, 09:49:11 PM |
|
Hi, Can you tell me how to edit the "Edit line 6 of configure.ac" via ssh?
With a text editor like nano. apt-get install nano nano configure.ac
Ctrl+X to exit nano. Thanks. I'm very new on Linux and if you are kind please need some help: git clone https://github.com/JayDDee/cpuminer-opt.gitcd cpuminer-opt Edit line 6 of configure.ac: AM_INIT_AUTOMAKE([gnu foreign]) ./autogen.sh ./configure CFLAGS="-O3 -funroll-loops -fomit-frame-pointer -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard" make This are the steps?
|
|
|
|
eule
|
|
December 06, 2017, 10:25:25 PM |
|
Compile minerd instead of cpuminer-opt if you're on ARM. Are you on ARM? apt-get install build-essential autotools-dev autoconf libcurl3 libcurl4-gnutls-dev jansson unzip wget https://github.com/conan-equal-newone/yenten/releases/download/1.1.0/yenten_minerd_source.zip unzip yenten_minerd_source.zip Edit line 6 of configure.ac: AM_INIT_AUTOMAKE([gnu foreign]) ./autogen.sh ./configure CFLAGS="-O3 -funroll-loops -fomit-frame-pointer -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard" make strip minerd Some of those package names can be different on your distro and I'm not sure about the dependencies since I already had most installed. Also change the CFLAGS -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard according to your device.
|
|
|
|
devident
Member
Offline
Activity: 152
Merit: 10
|
|
December 06, 2017, 11:52:59 PM |
|
Bitzeny goes up. Difficulty increases. Some miners peel off to yenten mining.
Hold onto your hats.
Still hope this coin will stay under the radar for quit some time. Mining is still easy :-) I would expect that the Yenten price is going to follow Bitzeny at a certain moment. Anyway wonder why the old lady (Bitzeny) is suddenly rising so fast. guys there are orders for 124,400 yenten above 100 sat on coinsmarkets. is anyone giving up their coins? no. remember when we were arguing over whether or not this was a joke coin with value or not. i guess those forum posts will go down in history. You can still solo mine this!! what monster did conan create.
|
|
|
|
Xeon_Xeon
|
|
December 07, 2017, 01:09:44 AM |
|
I did yesterday, earned three blocks in about three hours then nothing. Then I started to pool mine, about the same number of coins but its steady.
|
|
|
|
ir.hn
Member
Offline
Activity: 322
Merit: 54
Consensus is Constitution
|
|
December 07, 2017, 02:23:22 AM |
|
Bitzeny goes up. Difficulty increases. Some miners peel off to yenten mining.
Hold onto your hats.
Still hope this coin will stay under the radar for quit some time. Mining is still easy :-) I would expect that the Yenten price is going to follow Bitzeny at a certain moment. Anyway wonder why the old lady (Bitzeny) is suddenly rising so fast. guys there are orders for 124,400 yenten above 100 sat on coinsmarkets. is anyone giving up their coins? no. remember when we were arguing over whether or not this was a joke coin with value or not. i guess those forum posts will go down in history. You can still solo mine this!! what monster did conan create. I don't want to take much credit, the coin speaks for itself great job dev, but I have been giving it lots of publicity on the bitcoin general discussion and technical discussion forums .
|
|
|
|
cryptonomicon25
Member
Offline
Activity: 460
Merit: 12
|
|
December 07, 2017, 05:59:26 AM |
|
I thought people were losing interest in this coin, but here I check and the thread is still going strong.
|
|
|
|
Drag0g0
Newbie
Offline
Activity: 64
Merit: 0
|
|
December 07, 2017, 06:59:21 AM |
|
Well there is no other cpu only coin what can mine, this is great.
|
|
|
|
yarisken
Member
Offline
Activity: 68
Merit: 10
|
|
December 07, 2017, 07:02:10 AM |
|
I thought people were losing interest in this coin, but here I check and the thread is still going strong.
This coin is still mineable with cheap hardware. It's there Future crypto of Japan.
|
|
|
|
YaYMiner
Member
Offline
Activity: 80
Merit: 10
|
|
December 07, 2017, 08:21:15 AM |
|
I thought people were losing interest in this coin, but here I check and the thread is still going strong.
This coin is still mineable with cheap hardware. It's there Future crypto of Japan. Thank you for a profitable CPU coin
|
|
|
|
uberpatzer
Member
Offline
Activity: 83
Merit: 10
Soon we will all be dead
|
|
December 07, 2017, 09:36:02 AM |
|
Bitcoin is for old and rich men. Yenten is for the cool kids. It is cool because CPU only. No rich companies can hijack this coin. It is also cool because the creator is mysterious. And even more cool because you have to be 21 to mine this coin, but teenagers can secretely mine too. This coin has all the potential the become a cult hype amongst new generation kids for who bitcoin is already ancient and old news.
|
twitter: @uberpatzer --Soon we will all be dead--
|
|
|
trax0r
Full Member
Offline
Activity: 375
Merit: 103
Coinz-Universe
|
|
December 07, 2017, 11:32:12 AM |
|
also solo mining
{ "blocks" : 28058, "currentblocksize" : 1000, "currentblocktx" : 0, "difficulty" : 0.00584079, "errors" : "", "genproclimit" : -1, "networkhashps" : 414811, "pooledtx" : 0, "testnet" : false, "generate" : true, "hashespersec" : 1738 }
|
|
|
|
stevascha
Member
Offline
Activity: 312
Merit: 10
|
|
December 07, 2017, 12:07:02 PM |
|
I thought people were losing interest in this coin, but here I check and the thread is still going strong. the miner was consistent, no worries man
|
|
|
|
uberpatzer
Member
Offline
Activity: 83
Merit: 10
Soon we will all be dead
|
|
December 07, 2017, 12:11:24 PM |
|
also solo mining
{ "blocks" : 28058, "currentblocksize" : 1000, "currentblocktx" : 0, "difficulty" : 0.00584079, "errors" : "", "genproclimit" : -1, "networkhashps" : 414811, "pooledtx" : 0, "testnet" : false, "generate" : true, "hashespersec" : 1738 }
woah. what processor are you using man
|
twitter: @uberpatzer --Soon we will all be dead--
|
|
|
trax0r
Full Member
Offline
Activity: 375
Merit: 103
Coinz-Universe
|
|
December 07, 2017, 12:33:48 PM |
|
also solo mining
{ "blocks" : 28058, "currentblocksize" : 1000, "currentblocktx" : 0, "difficulty" : 0.00584079, "errors" : "", "genproclimit" : -1, "networkhashps" : 414811, "pooledtx" : 0, "testnet" : false, "generate" : true, "hashespersec" : 1738 }
woah. what processor are you using man Hardware is a HP Server with CPUs on 2 sockets (2x Intel XEON CPU E5-2660), 10 processor cores per socket.
|
|
|
|
FacelessCrypto
Full Member
Offline
Activity: 539
Merit: 105
IDENA.IO - Proof-Of-Person Blockchain
|
|
December 07, 2017, 12:40:40 PM |
|
also solo mining
{ "blocks" : 28058, "currentblocksize" : 1000, "currentblocktx" : 0, "difficulty" : 0.00584079, "errors" : "", "genproclimit" : -1, "networkhashps" : 414811, "pooledtx" : 0, "testnet" : false, "generate" : true, "hashespersec" : 1738 }
woah. what processor are you using man Hardware is a HP Server with CPUs on 2 sockets (2x Intel XEON CPU E5-2660), 10 processor cores per socket. How's the solo mining results?per day 200 coins I. Suppose.
|
|
|
|
|