[ANN] [KMC] Kripto Marka Coin

[bilibord]

New mining pool : http://kmc-pool.ddns.net/

Works with static diff. Just add it at the end of your address <address>.<diff>

i like that, very success for the project.

[1714023196]

1714023196

[1714023196]

1714023196

[1714023196]

1714023196

[1714023196]

1714023196

[drups]

Transaction hash: 6F7118536A20BBCFC7C883700CE3507CE77CD36A978A5B892ED2BBBAC813F2B4 - this transaction has not been confirmed. the purse is hanging with a question mark. can something to fix it?
Transaction hash: 859E586B300DC75904E8BF2C621E6B618D834C896B6ECFA127554D241C819CA9 - this transaction confirmed but the amount is not received at the destination. can something to fix it?

[tr4nscr1pt]

Please leave your node (kmcoind) allways running, that will speed up network and it is not taking your resources!

And when you send from your Gui wallet use level 0 to speed up.

[niG1y]

Hi there, can you give me a hand plz. Having such a trouble: starting forked ccminer (downloaded from link on pool http://pool.kmcoin.info configuration for bat took there too) and getting an error such as: [2017-12-01 02:00:43] GPU #1: FATAL: failed to allocate device memory for long state.
What's the matter, can't get.
For sure and nor simple questions:
bat:
ccminer -o stratum+tcp://pool.kmcoin.info:3333 -u KsxumUjhaa86693NRnBixo64zjfkfQzFeiJJS1ALaKFSan6sUTQF2XU5hAumthSH7z3avjM1EQkacVA Nnfi2iSTQLXem4zi -p x
pause //to see the problem

[tr4nscr1pt]

What GPU are you using??

[niG1y]

What GPU are you using??

having 2 - 1080 and 2 - 1070 on one rig

[tr4nscr1pt]

Config file looks fine. Please try minergate gui miner for beggining

view other pools, add new pool pool.kmcoin.info:3333 and your wallet address

[BluRixX]

Hi there, can you give me a hand plz. Having such a trouble: starting forked ccminer (downloaded from link on pool http://pool.kmcoin.info configuration for bat took there too) and getting an error such as: [2017-12-01 02:00:43] GPU #1: FATAL: failed to allocate device memory for long state.
What's the matter, can't get.
For sure and nor simple questions:
bat:
ccminer -o stratum+tcp://pool.kmcoin.info:3333 -u KsxumUjhaa86693NRnBixo64zjfkfQzFeiJJS1ALaKFSan6sUTQF2XU5hAumthSH7z3avjM1EQkacVA Nnfi2iSTQLXem4zi -p x
pause //to see the problem

Make sure to have at least 20 GB allocated for pagefile/swap.

And use latest Klaust's ccminer for cryptonight:
https://github.com/KlausT/ccminer-cryptonight/releases

[niG1y]

have tried xmr-stak-nvidia, seems to be working, thx
pool shows 1.8-1.9 kh/sec, is it ok? can't understand cause miner doesn't show values and i haven't mined cryptonight before, so don't know correct numbers for sure.
and such an interesting thing about temperature, only 48-50C on cards, interesting.
and my last question if you can help: this algo as i understand needs cpu, so it doesn't need memory and i can reduce it as possible?

[BluRixX]

have tried xmr-stak-nvidia, seems to be working, thx
pool shows 1.8-1.9 kh/sec, is it ok? can't understand cause miner doesn't show values and i haven't mined cryptonight before, so don't know correct numbers for sure.
and such an interesting thing about temperature, only 48-50C on cards, interesting.
and my last question if you can help: this algo as i understand needs cpu, so it doesn't need memory and i can reduce it as possible?

Check your miner not the pool but 1.8/1.9 Kh/s is very low, i do more than that with 4 x 1060s (550 h/s per card)

Yes low temp are normal, that's the good thing about cryptonight.

This algo is minable with a cpu yes, but when mining with gpu it uses memory, my settings are:  Gpu -20 Memory +800 and temps are still mid 50C.

Good luck !

[niG1y]

have tried xmr-stak-nvidia, seems to be working, thx
pool shows 1.8-1.9 kh/sec, is it ok? can't understand cause miner doesn't show values and i haven't mined cryptonight before, so don't know correct numbers for sure.
and such an interesting thing about temperature, only 48-50C on cards, interesting.
and my last question if you can help: this algo as i understand needs cpu, so it doesn't need memory and i can reduce it as possible?

1.8/1.9 Kh/s is very low, i do more than that with 4 x 1060s (550 h/s per card)

Yes low temp are normal, that's the good thing about cryptonight.

This algo is minable with a cpu yes, but when mining with gpu it uses memory, my settings are:  Gpu -20 Memory +800 and temps are still mid 50C.

Good luck !

Man, thx a lot! Now everything seems to be working fine. Getting almost 2500 h/s on miner shows 2400 on pool. Great, thx.
The only thing 1080 seems to be so bad on this algo, getting 560 on it and 690 on 1070, but it's only my fault that i've bought it (;
Will try managing configuration.
Thanks a lot!

[BluRixX]

have tried xmr-stak-nvidia, seems to be working, thx
pool shows 1.8-1.9 kh/sec, is it ok? can't understand cause miner doesn't show values and i haven't mined cryptonight before, so don't know correct numbers for sure.
and such an interesting thing about temperature, only 48-50C on cards, interesting.
and my last question if you can help: this algo as i understand needs cpu, so it doesn't need memory and i can reduce it as possible?

1.8/1.9 Kh/s is very low, i do more than that with 4 x 1060s (550 h/s per card)

Yes low temp are normal, that's the good thing about cryptonight.

This algo is minable with a cpu yes, but when mining with gpu it uses memory, my settings are:  Gpu -20 Memory +800 and temps are still mid 50C.

Good luck !

Man, thx a lot! Now everything seems to be working fine. Getting almost 2500 h/s on miner shows 2400 on pool. Great, thx.
The only thing 1080 seems to be so bad on this algo, getting 560 on it and 690 on 1070, but it's only my fault that i've bought it (;
Will try managing configuration.
Thanks a lot!

You're welcome! For the 1080 you should be still doing 10/15% more than the 1070, using latest nvidia drivers ?

[niG1y]

have tried xmr-stak-nvidia, seems to be working, thx
pool shows 1.8-1.9 kh/sec, is it ok? can't understand cause miner doesn't show values and i haven't mined cryptonight before, so don't know correct numbers for sure.
and such an interesting thing about temperature, only 48-50C on cards, interesting.
and my last question if you can help: this algo as i understand needs cpu, so it doesn't need memory and i can reduce it as possible?

1.8/1.9 Kh/s is very low, i do more than that with 4 x 1060s (550 h/s per card)

Yes low temp are normal, that's the good thing about cryptonight.

This algo is minable with a cpu yes, but when mining with gpu it uses memory, my settings are:  Gpu -20 Memory +800 and temps are still mid 50C.

Good luck !

Man, thx a lot! Now everything seems to be working fine. Getting almost 2500 h/s on miner shows 2400 on pool. Great, thx.
The only thing 1080 seems to be so bad on this algo, getting 560 on it and 690 on 1070, but it's only my fault that i've bought it (;
Will try managing configuration.
Thanks a lot!

You're welcome! For the 1080 you should be still doing 10/15% more than the 1070, using latest nvidia drivers ?

Yep, i even have just reinstalled it, cause was having some troubles. So installed new one 388.43 with deleting old ones

[Torin]

Man, thx a lot! Now everything seems to be working fine. Getting almost 2500 h/s on miner shows 2400 on pool. Great, thx.
The only thing 1080 seems to be so bad on this algo, getting 560 on it and 690 on 1070, but it's only my fault that i've bought it (;
Will try managing configuration.
Thanks a lot!

Hm..I think 2400 h\s to low for u rig.I have almost 3k\s from 1070x4.Use ccminer_cryptonight 206.And boost memory,not core.

[yewq888]

KMCoin vision is to provide a common currency dispersion for Eastern Europe, glad that individual investors can obtain mining chips, we dig the current income?

[qianliwen888666]

Now is building a new professional website, marketing can also start to synchronize vigorous publicity, I'm going to know more about it.

[Mr_Burst]

Please leave your node (kmcoind) allways running, that will speed up network and it is not taking your resources!

And when you send from your Gui wallet use level 0 to speed up.

Dev! You must admit that Cryptonight is ugly algo. (see you competitor TCoin - https://bitcointalk.org/index.php?topic=2432470.0)
Need relaunch this project with more flexibly and NiceHash-resistant algo such C11 or Xevan.
And dont forget make swap.

Do not be afraid to admit mistakes! 

[drups]

Dev ! For the second day see in the wallet transaction

Status: 0 confirmations
Date: -
To: KoaUFJ54iDL7Dv6YUjHtAWVbYgPXSuDEQHiC4WLnZR1p4KAsCxhcxNfYBtQWcTWLwjGnDFSKDPVK7Uv akSR9mibwAQrH7TC
Amount: -500.00 KMC
Fee: 0.01 KMC
Transaction hash: 6F7118536A20BBCFC7C883700CE3507CE77CD36A978A5B892ED2BBBAC813F2B4

Can something fix

[divedaucd]

Dev ! For the second day see in the wallet transaction

Status: 0 confirmations
Date: -
To: KoaUFJ54iDL7Dv6YUjHtAWVbYgPXSuDEQHiC4WLnZR1p4KAsCxhcxNfYBtQWcTWLwjGnDFSKDPVK7Uv akSR9mibwAQrH7TC
Amount: -500.00 KMC
Fee: 0.01 KMC
Transaction hash: 6F7118536A20BBCFC7C883700CE3507CE77CD36A978A5B892ED2BBBAC813F2B4

Can something fix

same problem with hash 2511EE2F1BB07C5F3D7C74D33B656FD5CC2DBAE34D34A146540FB551873C6E5F 0 confirm from last night. Now i really scare cryptonote algo, always always stucked. 

[sea13]

payments are stuck
http://prntscr.com/hhm1jx