|
dimafern (OP)
|
 |
October 08, 2019, 08:00:12 AM |
|
0.6-79@191008
What's new?
* fixed droptcpsock-dkms dependency which occurred in some cases
* TT-Miner v3.0.10 Beta4 (bug fixes)
* CCminer-djm34 v1.2.3 (stability improvement)
|
|
|
|
|
|
kostepanych2
|
|
October 09, 2019, 11:08:28 AM |
|
HiveOs sets minimum fan speed to the Tahiti cards now. I used old version of HiveOs earlier and all worked good. HiveOs didn’t affect fan speeds and RPM values were taken from bios. But after upgrade fan speeds has been set to a minimum:  .... Commenting on this line may help you. I have repeatedly written about this problem in their telegram channel, but for some reason it is stubbornly ignored. http://prntscr.com/pgbjbdThanks, it fixes the issue with Tahiti low fan speed, but it also disables fan control for RX cards... It would be nice to find solution to disable this option only for Tahiti cards... Otherwise, fan RPM values should be also flashed in bios for RX cards... |
|
|
|
|
|
dimafern (OP)
|
|
October 11, 2019, 12:13:30 PM |
|
0.6-81@191011
What's new?
* small fix which affect only for PXE image
* TT-Miner v3.0.10 Release (all changes in 3.0.10 beta + fixed an bug that interrupts the API connection under some conditions, added a watchdog for EPIC connection)
* PhoenixMiner v4.7c (since the 4.7b beta small improvements)
* Gminer v1.68 Beta (removed eaglesong algorithm support, improved performance for Cuckarood29/Cuckaroo29s/Aeternity algos)
* NBMiner v26.0 (added support for BFC mininig on Nvidia, fixed CKB compatibility on AMD, fixed cuckcoocycle on nicehash)
* WildRig-Multi v0.19.2 (added support x16rv2 algo)
* CPUminer-opt v3.9.9 (added power2b algo, added generic yespower-b2b)
|
|
|
|
|
|
dimafern (OP)
|
|
October 11, 2019, 12:44:11 PM |
|
 Starting October 9, 2019, HiveOS balance can be replenished using the BEAM cryptocurrency. |
|
|
|
|
|
dimafern (OP)
|
|
October 16, 2019, 01:28:41 AM |
|
0.6-82@191016
What's new?
* Improved Autofan
* Gminer v1.69 (added BFC mining on Nvidia and AMD cards)
* T-Rex v0.14.6 (bug fixes)
* WildRig-Multi v0.19.3 (fixed x16rv2 algo)
* NEW CPUminer-opt fork by rplant v4.0.20 (supported some CPU coins on yespower based algos)
|
|
|
|
|
Ventero
Newbie
 Offline
Activity: 15
Merit: 0
|
|
October 16, 2019, 12:16:10 PM |
|
Hello, I am mining zcoin with gminer. Today I tried djm34 (ccminer fork) and I got this error. Any ideas why it does not work? Thanks! error here https://imgur.com/GIsKawtsettings is like this https://imgur.com/MoYdb2v |
|
|
|
|
|
dimafern (OP)
|
|
October 16, 2019, 04:20:06 PM
Last edit: October 17, 2019, 04:18:01 AM by dimafern |
|
WEB INTERFACE UPDATE * October 16, 2019 * Major changes in this update: * interactive ASIC settings * search worker by IP address * adaptation to Nicehash v2 API * ability to select a version to downgrade or update Detailed here
|
|
|
|
|
TiasJ
Newbie
Offline
Activity: 26
Merit: 0
|
|
October 17, 2019, 10:52:57 AM |
|
How are you mining XZC with Gminer when it doesn't support MTP? Your error suggests issues with connectivity to the pool, which makes sense when looking at your second screenshot. You need to specify stratum+tcp:// in front of the pool address. I also suggest using either T-Rex miner or Cryptodredge, both of which are far better miners than CCMiner and its forks. |
|
|
|
|
|
dimafern (OP)
|
|
October 17, 2019, 08:29:32 PM |
|
0.6-83@191017
What's new?
* Autofan small fix (force set min_fan=25% for AMD GPU)
* Added output for some additional temps in amd-info if they exist
* Gminer v1.70 (fixed bug in BFC stratum leading to "low difficulty" shares after changing target)
* NanoMiner v1.6.1 (more Ethash memory optimizations for Nvidia cards, SSL connections for Nanopool ETH, ETC pools are used by default if no pools provided, Ubiqpool pools are used by default if no UBQ pools provided)
* NEW CCminer-tecracoin v1.2.4 (based on djm34 code added custom mtp implementation mtp-tcr for Nvidia)
* NEW SGminer-tecracoin v0.1.4 (based on djm34 code added custom mtp implementation mtp-tcr for AMD)
* NEW CPUminer-opt fork RKZ by RicKillerZ v4.2b (optimized for yespower variants CPUminer-opt version)
|
|
|
|
|
Huxley23
Jr. Member
Offline
Activity: 38
Merit: 11
|
|
October 21, 2019, 12:14:27 PM |
|
Has anyone been able to run rx 5700 on hiveos?
|
|
|
|
|
|
dimafern (OP)
|
|
October 21, 2019, 09:23:01 PM |
|
0.6-84@191021
What's new?
* Improved Autofan (improved algorithm, improved compatibility with custom mining cases)
* Issue fix: soft-WD now also stops when miner stop command applied
* CKB-miner v0.23.0 (updated for CKB v0.23)
* miniZ v1.5r (performance improvement for EQ 210/9 up to 7%, improved stability)
|
|
|
|
|
TiasJ
Newbie
Offline
Activity: 26
Merit: 0
|
|
October 22, 2019, 12:18:36 PM |
|
Has anyone been able to run rx 5700 on hiveos?
No adequate Linux drivers yet. |
|
|
|
|
Huxley23
Jr. Member
Offline
Activity: 38
Merit: 11
|
|
October 22, 2019, 05:38:15 PM |
|
Has anyone been able to run rx 5700 on hiveos?
No adequate Linux drivers yet. thanks |
|
|
|
|
|
dimafern (OP)
|
|
October 22, 2019, 07:07:26 PM |
|
 Linux client image from stable branchMain specifications: * Universal boot mode: BIOS | UEFI * Based on Ubuntu 18.04 * Hive client: 0.6-84 * Linux kernel: 5.0.21 * Drivers version: AMD v19.20, Nvidia: v430.50 Available for download as a torrent or zip archive in the "GPU" section at https://hiveos.farm/install. |
|
|
|
|
|
dimafern (OP)
|
|
October 28, 2019, 11:20:33 PM |
|
0.6-85@191028
What's new?
System:
* cache-hive-ip fixes and improvements
* Issue fix: report all connected disks to web, not only system
* Issue fix: nvidia-oc now reports error if setting power limit fails
* Issue fix: autofan unable set fan speed to MAX in some situations
* Improvement: added info to autofan "unable to set fan speed" message
* Improvement: miner log now reports if session is active or not
* Improvement: added miner status command to get running screen sessions without opening them
* Improvement: watchdog now sends miner logs with low hashrate message and top processes list on high LA
* Improvement: improved API sockets close on miner start
Miners:
* CCminer-djm34 v1.3.0 (fix a bug in solo mining)
* XMRigCC v2.1.0 (as XMRig fork - full rebase on XMRig v3.2.0)
* WildRig-Multi v0.20.0.3 (added support of mtp and mtp-tcr algo, added new arguments --opencl-less-cpu-load and --split-job)
* TT-Miner v3.1.0 Beta1 (small improvements for all ProgPoW variants)
|
|
|
|
|
|
dimafern (OP)
|
|
October 30, 2019, 06:23:33 PM
Last edit: October 30, 2019, 09:51:29 PM by dimafern |
|
📢 Halloween Deposits x2 🎃🎃Make a deposit on Halloween (October 31, all timezones) and receive 🔥 100% bonus 🔥 from Hive.(Note: at the time of the action other bonuses don't apply).🧛♂️ 🎃 👻 📢 Xeллoyин дeпoзиты x2 🎃🎃Cдeлaйтe дeпoзит нa Xeллoyин (31e oктябpя, вce чacoвыe пoяca) и пoлyчитe 🔥 бoнyc 100% 🔥 oт Hive.(Пpимeчaниe: нa мoмeнт aкции дpyгиe бoнycы нe пpимeняютcя)🧛♂️ 🎃 👻 https://www.youtube.com/watch?v=Zc_Anw-zQaE
|
|
|
|
|
|
dimafern (OP)
|
|
October 31, 2019, 04:53:28 PM |
|
 𝗢𝗻𝗲 𝗱𝗮𝘆 𝗼𝗻𝗹𝘆.
𝟯𝟭 𝗢𝗰𝘁𝗼𝗯𝗲𝗿.
𝗗𝗘𝗣𝗢𝗦𝗜𝗧𝗦 𝗔𝗥𝗘 𝗗𝗢𝗨𝗕𝗟𝗘𝗗! ✖️ 2️⃣ *𝘍𝘰𝘳 𝘦𝘹𝘢𝘮𝘱𝘭𝘦, 𝘪𝘧 𝘺𝘰𝘶 𝘥𝘦𝘱𝘰𝘴𝘪𝘵 $100 𝘺𝘰𝘶 𝘸𝘪𝘭𝘭 𝘨𝘦𝘵 𝘵𝘩𝘦 𝘴𝘢𝘮𝘦 𝘢𝘮𝘰𝘶𝘯𝘵 𝘢𝘴 𝘢 𝘣𝘰𝘯𝘶𝘴. *𝘢𝘵 𝘵𝘩𝘦 𝘵𝘪𝘮𝘦 𝘰𝘧 𝘵𝘩𝘦 𝘢𝘤𝘵𝘪𝘰𝘯 𝘰𝘵𝘩𝘦𝘳 𝘣𝘰𝘯𝘶𝘴𝘦𝘴 𝘥𝘰 𝘯𝘰𝘵 𝘢𝘱𝘱𝘭𝘺 Happy Halloween! 🎃👻 START MINING WITH HIVEOS |
|
|
|
|
|
dimafern (OP)
|
|
November 07, 2019, 01:38:03 AM
Last edit: November 07, 2019, 12:46:46 PM by dimafern |
|
0.6-86@191107
What's new?
SYSTEM
💊 Issue fix: miner start exit code fixed
💊 Issue fix: nvidia-oc was not applied with large delay values (delay now limited to 150sec and also prevent simultaneous nvidia-oc runs by killing already running)
⚙️ Improvement: increased width of top processes for output triggered by watchdog event "High LA"
⚙️ Improvement: minor improvement in multiple miners start
MINERS
⛏ Gminer v1.72 (added ethash algo support for ETH/ETC coins, also supported NiceHash/MiningPoolHub pools with --proto stratum option)
⛏ CKB-miner v0.24.0 (updated to CKB v0.24)
⛏ CCminer-djm34 v1.3.1 (corrects a memory leak which may cause ccminer after a long while if the ressources ram/virtual memory are limited)
⛏ WildRig-Multi v0.20.1 (up to 5% hashrate speedup for mtp/mtp-tcr on Navi, fixed x22i incorrect shares)
⛏ TT-Miner v3.1.0 Beta2 (improvements for MTP - mostly for RTX cards)
⚒ lolMiner stats issue workaround: in some algos lolMiner API not incremented submitted shares but counting accepted shares which breaks ASR
⚒ CPUminer-opt and XMRig fix: temperature readings fixed (mostly for AMD Ryzen)
⚒ Ethminer fix: fallback to v0.17.1 as "Latest" due buggy API in v0.18.0 (if you like v0.18.0 you can choose it in miner settings)
|
|
|
|
|
esparpiri
Newbie
Offline
Activity: 23
Merit: 0
|
|
November 07, 2019, 04:40:41 AM |
|
Hi i have a big problem with cpu mining, when i put the xmrig and 6 gpu the cpu start mine at 10%, for example if i put 4 gpu each one mines well and the cpu mines at 3600m/s but when i put 6 gpus each gpu mine well but the cpu start mine at 300m/s, what coul it be?? another problem its that the motherboard does not give me video after it past the ubuntu screen the monitor stays black, i already trie pcie gen 1, 2, 3 and auto, and put csm compatibility in bios, but nothing seams to work, its a x99 gigabyte ud4 and a msi x399 carbon
|
|
|
|
|
TiasJ
Newbie
Offline
Activity: 26
Merit: 0
|
|
November 07, 2019, 03:06:34 PM |
|
Hi i have a big problem with cpu mining, when i put the xmrig and 6 gpu the cpu start mine at 10%, for example if i put 4 gpu each one mines well and the cpu mines at 3600m/s but when i put 6 gpus each gpu mine well but the cpu start mine at 300m/s, what coul it be?? another problem its that the motherboard does not give me video after it past the ubuntu screen the monitor stays black, i already trie pcie gen 1, 2, 3 and auto, and put csm compatibility in bios, but nothing seams to work, its a x99 gigabyte ud4 and a msi x399 carbon
Please send us an email ( bee@hiveos.farm) with your worker link (URL to your rig's dashboard) and we'll take a look for you. |
|
|
|
|
|
