Hiveon. №1 OS for mining

[dimafern]

0.6-144@200624 🐧

What's new?

MINERS
⛏ Bminer v16.2.3 (added support the Cuckaroo29m hardfork for Qitmeer, fixed compatibility issues when mining Ethereum on Nicehash, removed CKB support)
⛏ NBMiner v31.1 (added cuckatoo32 for GRIN on Nvidia 8G above GPUs, kawpow now fully supports NiceHash's protocol)

[dimafern]

0.6-144@200625 🐧

What's new?

MINERS👷‍♂️
⛏ Bminer v16.2.4 (fixed the miscalculations of the targets for Qitmeer)

[dimafern]

0.6-144@200628 🐧

What's new?

MINERS👷‍♂️
⛏ T-Rex v0.15.8 (added extranonce support for Nicehash)
⛏ miniZ v1.6v2 (added support for BeamHashIII - 144,5s/beam3; completely reworked the --ocX mechanism; changed kernel calls for 150,5 possible improves CPU usage; better default kernels for GTX1070, on stock settings, for all algorithms; fixed --show-mode option that was only showing in combination with other options)
⛏ Gminer v2.11 (added support BeamHashIII algorithm for Nvidia GPUs; improved Cuckatoo32 performance up to 5%-8% dependent on GPU; lowered fee for Cuckatoo32 algorithm to 2%)
⛏ lolMiner v1.01 (Changes v1.01 vs 1.0: improved performance of Beam Hash III on all 6G+ cards ~4-5%; added 3G/4G solver for BeamHashIII; fixed an issue with mining BeamHash III to NiceHash; --tls now allowed to be used multiple times to configure it for each pool seperately. Changes v1.0 vs 0.9.8: added optimizes solvers for BeamHashIII for AMD & Nvidia GPUs - BEAM for autoswitch on 8G cards or BEAM-III for manual switch on 6G cards; improved up to +10% performance on GRIN-C29M solver for 8G GPUs; added Cuckaroo-30 solver to mine Cortex; AMD Navi does now work on all supported algorithms; added support for non-integer difficulty on Grin; reactivated support for BeamHashI including support for personalization strings; removed support mining MNX due dead project; Note: this version has new config format - versions prior v1.0 no longer supported.)
⛏ TeamRedMiner v0.7.7 (added support for Nimiq Navi; added support for Icemining Nimiq solo mining mode)

[dimafern]

0.6-144@200629 🐧

What's new?

MINERS👷‍♂️
⛏ Bminer v16.2.5 (improved performance of the BeamHash III miner, fixed critical issues that the BeamHash III miner computes invalid solutions, reduced the rejection rates of the Ethereum and ProgPOW miners)
⛏ miniZ v1.6v3 (removed autoswitch for Beam, fixed --pers auto that was not working on NiceHash, added support for GTX 1650 4GB, in BeamHashIII, added a few corrections to 144,5 that possible will reduce cpu usage)
⛏ Beam OpenCL v1.0.85 (мaйнep c oткpытым иcxoдным кoдoм oт paзpaбoтчикoв Beam c 0% кoмиccиeй, oбнoвлeн для BeamHashIII, мaйнep мeдлeнный, нo бecплaтный)

[dimafern]

0.6-145@200701 🐧

What's new?

SYSTEM 🖥
⚙️ Fixed some issues with hardware watchdogs (watchdog stopped working after the boot in some cases)

MINERS👷‍♂️
⛏ lolMiner v1.02 (disabled BeamHashIII auto switcher, fixed a bug that made the miner not start mining Cortex, fixed a bug that made the miner not starting 'BEAM-III' on RX 550 4G GPUs, fixed a bug with BeamHashI 3G solver)
⛏ nq-miner v0.99.7 (added support Icemining solo mode: '-pool-params m=solo')
⛏ 🆕 XPM miner by eXtremal-ik7 OpenCL v10.5-beta1 & CUDA v10.3 (XPM/PrimeCoin miners for OpenCL/CUDA)

[igotek]

https://imgur.com/OvEOwDU

hello;
Could you explain anyone what is this error on hiveOS ?
HiveOS: 0.6-144@200629, Kernel: 5.0.21-hiveos, A OpenCL 19.20

There is no any error messages on miner screen or hiveos notification. But i saw this errors when i connect the monitor to the rig.

vm_context1_protection_fault_addr
vm_context1_protection_fault_status

[HaloGenius]

hello;
Could you explain anyone what is this error on hiveOS ?
HiveOS: 0.6-144@200629, Kernel: 5.0.21-hiveos, A OpenCL 19.20

There is no any error messages on miner screen or hiveos notification. But i saw this errors when i connect the monitor to the rig.

vm_context1_protection_fault_addr
vm_context1_protection_fault_status

When your overclocking settings is maximum so much that you sometimes have invalid shares, but the driver still remains operational.
In particular, you need to pay attention to the video card with the address on the bus 00:0c and reduce a little OC settings (mem clock or REF value) for this card.

As we can see from the screenshot it's issue comes from PhoenixMiner and there is ethash algorithm where OC settings for video memory is important thing so to eliminate this error follow the recommendation given above.

[igotek]

hello;
Could you explain anyone what is this error on hiveOS ?
HiveOS: 0.6-144@200629, Kernel: 5.0.21-hiveos, A OpenCL 19.20

There is no any error messages on miner screen or hiveos notification. But i saw this errors when i connect the monitor to the rig.

vm_context1_protection_fault_addr
vm_context1_protection_fault_status

When your overclocking settings is maximum so much that you sometimes have invalid shares, but the driver still remains operational.
In particular, you need to pay attention to the video card with the address on the bus 00:0c and reduce a little OC settings (mem clock or REF value) for this card.

As we can see from the screenshot it's issue comes from PhoenixMiner and there is ethash algorithm where OC settings for video memory is important thing so to eliminate this error follow the recommendation given above.

it works. i reduce the memory. and it is good now. no error.
is it possible to get error message on hiveos screen without monitor if the rig has this type error.

[dimafern]

0.6-145@200702 🐧

What's new?

MINERS👷‍♂️
⛏ Gminer v2.12 (improved performance for BeamHashIII 2%-10% dependent from GPUs, removed auto-switching to BeamHashIII)
⛏ NoncerPro Nimiq CUDA v3.3.1 (added '--extra', '-x' option for solo mining on icemining pool, eg: usage : -x="m=solo")
⛏ WildRig-Multi v0.25.2 (fixed crash after devfee for progpow variants, fixed wrong logic for temp limits which was broken since version 0.25.0, initial support for AMD hardware monitoring)

[kral_658]

Could you tell me why my rig gives this error ?
it s not all the time. it sometimes happens.
There is no any eror messages on the miner software.

https://i.imgur.com/qIzGGcE.jpg

[dimafern]

0.6-145@200705 🐧

What's new?

MINERS👷‍♂️
⛏ Gminer v2.13 (added support Qitmeer hardfork to cuckaroom29 algorithm)
⛏ lolMiner v1.03 (added new BeamHashIII 4G solver, replaces the 6G solver on AMD Vega GPUs and earlier: +5-8% performance on RX 580 & Vega GPUs, added new BeamHashIII 6G solver on ROCm and for AMD Navi GPUs: +8-10% performance on Navi cards)

[dimafern]

0.6-145@200706 🐧

What's new?

MINERS👷‍♂️
⛏ Gminer v2.14 (fixed bug with share difficulty on cuckaroom29-qitmeer algorithm, lowered devfee to 3% on cuckaroom29-qitmeer algorithm)

[HaloGenius]

Could you tell me why my rig gives this error ?
it s not all the time. it sometimes happens.
There is no any eror messages on the miner software.

a floating defect that indicates a possible bad contact, for example, between a riser and a motherboard slot

[dimafern]

0.6-145@200708 🐧

What's new?

MINERS👷‍♂️
⛏ Gminer v2.15 (added Cuckaroo29b algorithm for TUBE/BitTube hardfork)
⛏ Bminer v16.2.7 (improved performance for the BeamHashIII, fix compatibility issues with Beam mining pools, reduced rejection rates for all miners)

[dimafern]

0.6-145@200711 🐧

What's new?

MINERS
⛏ XMRig v6.2.3 (AstroBWT: fixed OpenCL compilation on some systems; KawPow: optimized CPU share verification, fixed DAG initialization on slower AMD GPUs, fixed rare duplicate share errors; RandomX: added error message when MSR mod fails, small speedup on Ryzen CPUs; fixed GPU health readings for pre Vega GPUs; added results and connection reports)

[dimafern]

0.6-146@200714 🐧

What's new?

SYSTEM 🖥
⚙️ Autofan: fixes & improvements (auto switching to manual control on AMD GPUs, more precise and faster AMD fan control, human readable payload in error msgs)

MINERS👷‍♂️
⛏ lolMiner v1.04 (slightly improved performance (2-5%) on all AMD cards on BeamHashIII, most significant (about 7%) on Navi GPUs)
⛏ Gminer v2.16 (added support hardfork TUBE/BitTube to Cuckaroo29b on AMD cards)

[dimafern]

0.6-146@200716 🐧

What's new?

MINERS👷‍♂️
⛏ PhoenixMiner v5.1b (added support for VRAM timing adjustments for Nvidia cards of 10x0 series: new command-line parameters '-straps', '-vmt1', '-vmt2', '-vmt3', and '-vmr'; added '-ttli' option to automatically decrease the mining speed to avoid overheating the GPUs over the target temperature; many other small improvements and fixes)
⛏ Gminer v2.18 (added Cuckarooz29 algorithm)
⛏ Bminer v16.2.8 (added support Cuckaroo29z algorithm for the GRIN hardfork, various performance improvements on the AMD cards on Ethash)
⛏ XMRig v6.3.0 + CUDA plugin v6.3.0 (added support for upcoming Haven offshore fork; RandomX: added new option 'cache_qos' in randomx object for cache QoS support; CryptoNight OpenCL: fix for long input data)
⛏ NanoMiner v1.9.6 (XMR mining: fixed miner termination in case there are no jobs for 10 minutes)

[dimafern]

0.6-147@200718 🐧

What's new?

SYSTEM 🖥
⚙️ Minor fix related to GPU stats
MINERS👷‍♂️
⛏ Gminer v2.19 (improved Cuckarooz29 algorithm)

[dimafern]

0.6-147@200719 🐧

What's new?

MINERS👷‍♂️
⛏ Bminer v16.2.9 (improved Cuckarooz29 algorithm)

[dimafern]

0.6-147@200720 🐧

What's new?

MINERS👷‍♂️
⛏ TeamRedMiner v0.7.8 (ready for upcoming XHV/Haven Protocol hardfork on July 20, 2020; tiny Nimiq optimizations: 1-2% max, mostly Vega and Navi; some bugs fixed)