Hiveon. №1 OS for mining

[dimafern]

0.6-162@200927 🐧

What's new?

SYSTEM 🖥
⚙️ Updated NVidia VBIOS flasher to v5.527 (added RTX support)
⚙️ Improved hive-replace tool (added support NVMe drives)

MINERS👷‍♂️
⛏ Gminer v2.24 (added support for RTX 30xx cards, removed BBC,Qitmeer algorithms)
⛏ T-Rex v0.17.3 (improved 'ethash' 1-2%, added x33 algo, improved compatibility with various mining pools / protocols)
⛏ TeamRedMiner v0.7.11 ('ethash' additions: printing share diff in GH (always enabled), hashrate watchdog by option '--eth_hashwatch)', better debug support with new options '--long_timestamps', '--pool_debug', added DAG allocation patch for certain mobo/bios combinations '--eth_dag_alloc_patch', fixed broken argon2/chukwa)

[dimafern]

0.6-163@200930 🐧

What's new?

SYSTEM 🖥
⚙️ Improved selfupgrade tool (update procedure optimized to reduce internet traffic)
⚙️ Updated amdmeminfo tool (added yet another variant of RX580 2048SP)

MINERS👷‍♂️
⛏ NBMiner v32.0 (added support for mining BEAM with Nvidia 3GB+ GPUs, added ability to mining cuckatoo32 on Nvidia 6GB GPUs, optimized ethash for AMD RX 4xx, 5xx, Vega series 8GB+ GPUs)
⛏ Gminer v2.26 (fixed ProgPoW/KawPoW compatibility with RTX 30xx cards; fixed performance regression on Aeternity, BitTube, Swap)
⛏ WildRig-Multi v0.27.6 (fixed incorrect work and high CPU load of x11k, minotaur and some other similar algos for Nvidia GPUs, fixed crash of some algorithms on Nvidia, fixed issue with getting banned while mining veriblock on official node, tuned a bit 'minotaur' for Nvidia)
⛏ NanoMiner v1.11.0 (removed dev fee for RandomHash2 (Pascal coin) algorithm. Mining Pascal is now free)
🐞 Bminer: fixed stats for AMD GPUs

[dimafern]

0.6-164@201001 🐧

What's new?

SYSTEM 🖥
⚙️ Improved selfupgrade tool

MINERS👷‍♂️
⛏ TeamRedMiner v0.7.12 (bug fix v0.7.11 release: miner could crush on ethash rejected shares)

[dimafern]

0.6-164@201002 🐧

What's new?

MINERS👷‍♂️
⛏ CPUminer-Opt-JayDDee v3.15.0 (fugue optimized with AES, improves many sha3 algos, minotaur algo optimized for all architectures)
⛏ lolMiner v1.09 (added support for Ethash on AMD GPUs for all 4G cards are supported up to epoch ~380 to 382; new option '--keepfree' to set the number of MBytes the miner should reserve on each GPU for the operation system default 5; ethash specific option '--benchepoch' among with '--benchmark ETHASH' to run the benchmark mode for a fixed epoch height, default: 350; ethash specific option '--ethstratum' to set the stratum mode for ethash currrently available options are ETHV1 (default) and ETHPROXY; ethash specific option '--dagdelay' to put a delay in seconds between allocation of DAG for the single GPUs; bugs fixes)

[dimafern]

0.6-164@201003 🐧

What's new?

MINERS👷‍♂️
⛏ XMRig v6.3.5 (KawPow: fixed OpenCL memory leak, RandomX: optimized soft AES code, general code improvements, fixed crash on old CPUs)

[dimafern]

0.6-165@201005 🐧

What's new?

SYSTEM 🖥
⚙️ Improved nvidia-driver-update tool (added support for CUDA v11.1; added CUDA version info; added new options)
⚙️ Updated Hive libs (added CUDA RTL v11.1)
⚙️ Fixed overclocking for Nvidia GTX 1650 Super

MINERS👷‍♂️
⛏ SRBMiner-Multi v0.5.3 (added GPU mining for 'argon2d_dynamic', 'argon2id_chukwa', added new algo for CPU&GPU mining 'cryptonight_cache'; fixed 'duplicate share' errors with 'ethash'; less stale shares on 'ethash' algorithm in auto mode)
⛏ TeamRedMiner v0.7.13 (improved miner stability; added option for manual adjustment of 4GB DAG allocation '--eth_4g_alloc_adjust')
⛏ NBMiner v32.1 (fixed AMD device initialization failure on some rigs)

[dimafern]

0.6-165@201008 🐧

What's new?

MINERS👷‍♂️
⛏ lolMiner v1.10 (reduced power draw for RX 460 - 590 GPUs on ethash; added support for mining Zilliqa dual mining with ETH/ETC; added new parameter: '--enablezilcache': allows 8G+ AMD GPUs to create two DAGs, one for epoch 0 (Zilliqa) and one regular one; fixed a bug that mining with epoch lower 256 freezes the RIG. Nicehash mining Ethash should be stable now)
⛏ T-Rex v0.18.0 BETA (add progpow-veriblock algorithm for Veriblock; add progpow-veil algorithm for VEIL's upcoming fork; dd megabtx algorithm for Bitcore; bug fixes; Notice: since this is a beta version and added for testing purposes only, you must directly select the version of the miner in the Flight Sheet / Miner settings)
⛏ WildRig-Multi v0.28.0 (implemented progpow-veil for Veil; one more fix for minotaur on Nvidia; should be fixed monitoring via nvml on newer Nvidia drivers)
⛏ Gminer v2.27 (fixed miner crash on Ethash/ProgPoW for DAG over 4GB; added VProgPoW algorithm for VeriBlock; added ProgPoWZ algorithm for Zano)
🐞 Fixed TeamRedMiner v0.7.13 package (watchdog script was missing)
🐞 Fixed Bminer stats (for some cases not shown on dashboard)

[dimafern]

0.6-165@201011 🐧

What's new?

MINERS👷‍♂️
⛏ Gminer v2.28 (support ETH/ETC+ZIL mining, fixed compatibility with luckypool.io for Zano, fixed "All DevFee pools are unavailable" error for Grimm)
⛏ T-Rex v0.18.1 (add progpow-veriblock algorithm for Veriblock; add progpow-veil algorithm for VEIL's upcoming fork; added megabtx algorithm for Bitcore; on stratum+tcp automatically selects the most commonly used pool protocol for a given algorithm; bug fixes)
⚙️ Improved lolMiner stats  (added total and per GPU invalid shares for v1.10+)
🐞 Fixed WildRig-Multi stats (for some configurations with Nvidia GPUs)

[joaogti36]

we need new amd drivers in hiveos... can we see that happen?

[dimafern]

0.6-165@201012 🐧

What's new?

MINERS👷‍♂️
⛏ SRBMiner-Multi v0.5.4 (added 'argon2id_chukwa2' algorithm for CPU & GPU, fixed bug that caused invalid shares sometimes in multi algorithm mode mining, changed default value for '--retry-time' from 15 to 5 seconds; minor bug fixes)
⛏ CPUminer-Opt-rplant v4.5.17 (added new algo for qureno: 'x33' renamed to 'qureno')

[dimafern]

0.6-166@201015 🐧

What's new?

SYSTEM 🖥
⚙️ Fixed hashrate watchdog (wd was not working in some cases)

MINERS👷‍♂️
Two miners, lolMiner and TeamRedMiner, presented solutions that allow AMD 4Gb cards to be mined after the 381 epoch. It is worth noting that this will happen with a loss of hash rate with each subsequent epoch.
⛏ lolMiner v1.11 (added experimental ZOMBIE mode for 4G AMD GPUs: allow continue mining Ethash above the 4G DAG size limit with some time memory trade of; completed rework of Ethash memory allocation strategies)
⛏ TeamRedMiner v0.7.14 (Ethash: verified Linux support for 4GB gpus up to and including epoch 381; Ethash: added support for extended 4GB mining from epoch 382 and up; Kawpow: cleaned up false hw errs for some block heights)

[dimafern]

0.6-167@201018 🐧

What's new?

SYSTEM 🖥
⚙️ Small fix for hive-replace tool (fixed kernel version info on some images)
⚙️ Improved hashrate watchdog (reduced power usage if no internet connection)

MINERS👷‍♂️
⛏ WildRig-Multi v0.28.1 (updated progpow-veil for started testnet; lowered devfee on megabtx and megamec to default 1%)
⛏ Gminer v2.29 (caching DAG file, very useful for Ethash+ZIL mining, miner will not spend time on creating DAG file on Ethash/ZIL change after caching; minimize memory allocation for DAG file; fixed "All DevFee mining pool are unavailable" error on Ethash)
⛏ T-Rex v0.18.2 (updated 'progpow-veil' algorithm for VEIL's upcoming fork)
⛏ XMRig v6.4.0 + CUDA plugin v6.4.0 (Added 'argon2/chukwav2' algorithm; RandomX: removed 'rx/loki' algorithm, improved software AES performance; Added more precise hashrate calculation; General code improvements and bug fixes)
🐞 NanoMiner: fixed stats for some configurations

[bsmithdev]

Hi miners,

I am new here.

I just tested HIVEOS with our new Ravencoin (KAWPOW) pool (https://rvn.bsmith.io) and it works wonderfully.

Thanks to the team !!

If you have any questions come talk to us on -

Telegram: https://t.me/blocksmithpool

Discord: https://discord.gg/VVfaUdQ

[DooGZ]

I'm using HiveOS and yesterday PhoenixMiner(or any miner) does not detect any GPUs, but in HiveOS all GPUs(10 RX's) are detected? It was working the day before. anyone encountered this?

[darkdude]

for those of us running 4gb cards with lol 1.11 how do we enable the zombie mode or is it turned on by default?

[dimafern]

0.6-168@201024 🐧

What's new?

SYSTEM 🖥
⚙️ Improved hive-replace (added support for XZ images; reduced min ram limit to 3GB; added '--force' to override this limit; added '--safe' option to run replace in screen session so it can be detached and resumed)
⚙️ Improved gpu-fans-find (now can turn LEDs on and off on Nvidia GPU)
⚙️ Improved optional package 'repomirror' (trying resume broken download first)

MINERS👷‍♂️
⛏ TeamRedMiner v0.7.16c (v0.7.15: reverted ethash kernels to v0.7.10 for stability purposes; fixed eth+zil mining bug on 4GBs; v0.7.16: added trtl_chukwa2 Turtlecoin's new algo without Navi support)
⛏ XMRig-XMRigCC v2.8.3 (added turtlecoin Chukwa v2 algo; removed obsolete rx/loki; fixed potential crash when pool user/pass is not initialized)
⛏ CPUminer-Opt-rplant v4.5.18 (small bug fixes)
⛏ Updated XMRig-CUDA plugin v6.4.1 for XMRig v6.x (fixed broken KawPow)

[HaloGenius]

for those of us running 4gb cards with lol 1.11 how do we enable the zombie mode or is it turned on by default?

no special options for this mode but you can clarify it here

I'm using HiveOS and yesterday PhoenixMiner(or any miner) does not detect any GPUs, but in HiveOS all GPUs(10 RX's) are detected? It was working the day before. anyone encountered this?

Which cards are trying?

[darkdude]

it seems in order to use the zombie mode in lol, we need to add a new parameter to the miner at boot called "keepfree" and provide a value.  Here is what they said.  Not sure how I can add the keepfree value from the HiveOS UI?

How to set it up

There is only one thing that lolMiner need to know to run the zombie mode successfully. This is the last epoch the miner can run without issues in the normal mining mode, so lolMiner does not allocate more memory then it can without messing things up.
The only parameter to influence this is “ keepfree” which gives the number of megabytes the miner shall not use on the card to reserve it for the system.
By default this value is set to 56 MBytes in Windows and 5 MBytes in Linux, which should work fine. But how to try out?
The easiest way is to benchmark lolMiner at an epoch that is larger then 383 — in this case all the 4G cards will enter the Zombie mode and use as much memory as the default “keepfree” allows. To do so run e.g. benchmark for epoch 385:

In Linux:
./lolMiner --benchmark ETHASH --benchepoch 385 --keepfree 5
In Windows:
lolMiner.exe --benchmark ETHASH --benchepoch 385 --keepfree 56

[FP91G]

I downloaded the latest version of Hive Os( hiveos-0.6-156@200905) and it didn't work with 5600XT graphics cards.
I could not start mining, the miner wrote that no drivers for the video card were found.
I couldn't update the drivers and I had to use another Linux operating system for mining.

[darkdude]

for 5600xt make sure you download the beta version

http://download.hiveos.farm/beta