[POR]⚡ELECTRONEUM⚡Official Moderated Thread

[DannyTrejo]

Electroneumd has stopped working, what can i do?

[covert24]

Electroneumd has stopped working, what can i do?

unplug your computer and go to sleep...  Or!  try to run it again.  Explaining what the actual problem is may help out a bit.  "It doesnt work" is unlikely to get any actual solution to a problem in general, especially crypto..

[Grrizzly]

[Suspicious link removed] link=topic=2353282.msg24146531#msg24146531 date=1510008118]

[Suspicious link removed] link=topic=2353282.msg24146224#msg24146224 date=1510007553]

[Suspicious link removed] link=topic=2353282.msg24145764#msg24145764 date=1510006764]

Good news ... Suprnova added ETN pool...will try one more day mining with them...
 if i don't see some ETN  after this attempt ....I'm giving up on the coin...as my miner i need to supply the demand or or move on.

https://etn.suprnova.cc

Hi

I invite you to join

https://easyhash.io/pools/electroneum


We pay out 5.000.000+ coin's every day, and have been since launch

Payouts are delayed atm ??

Dunno if you mean more than usual but payouts are always delayed, they have a 18 block maturity followed by a 10 minute interval, it usually ends up being 20-30mins in my experience

no i mean getting sent to wallets it was saying last payout sent 27 minutes , not stressed just was curious and yes i had more than the minimum to be sent out

Sometimes I've found blocks get stuck in the mempool for a while, if you look at the tx link on the block explorer and it doesn't have a block height assigned to it that'll probably be the case, if you go to the blockexplorer.electroneum.com you can see the tx's sitting in the mempool.

P.S. the site says last payment 2mins ago for me.

yeah it was a little bit ago , i get my coins was just noticed that before when i got up , but its all good just was curious if payouts were changed thats all , for my planning lol

:/ you might have been right about something being off, my last payout was when I last replied to you... been a while...

LOL right as I type that I get a payout...

Looks like I spoke too soon... 2hrs later and the tx hash isn't even showing in the block explorer yet... somethings gone wonky over at easyhash.io

[bluehalk]

Where is everyone?

Haven't seen any new post on this forum. Come on guys wake up.

[mk4y]

im here still lurking for release of my coins.

[bluehalk]

im here still lurking for release of my coins.

Hehe.... Nice to have you around my friend.

[Altex.ws]

im here still lurking for release of my coins.

Hehe.... Nice to have you around my friend.

Im always lurking in the dark corners!!

[Altex.ws]

[Suspicious link removed] link=topic=2353282.msg24146531#msg24146531 date=1510008118]

[Suspicious link removed] link=topic=2353282.msg24146224#msg24146224 date=1510007553]

[Suspicious link removed] link=topic=2353282.msg24145764#msg24145764 date=1510006764]

Good news ... Suprnova added ETN pool...will try one more day mining with them...
 if i don't see some ETN  after this attempt ....I'm giving up on the coin...as my miner i need to supply the demand or or move on.

https://etn.suprnova.cc

Hi

I invite you to join

https://easyhash.io/pools/electroneum


We pay out 5.000.000+ coin's every day, and have been since launch

Payouts are delayed atm ??

Dunno if you mean more than usual but payouts are always delayed, they have a 18 block maturity followed by a 10 minute interval, it usually ends up being 20-30mins in my experience

no i mean getting sent to wallets it was saying last payout sent 27 minutes , not stressed just was curious and yes i had more than the minimum to be sent out

Sometimes I've found blocks get stuck in the mempool for a while, if you look at the tx link on the block explorer and it doesn't have a block height assigned to it that'll probably be the case, if you go to the blockexplorer.electroneum.com you can see the tx's sitting in the mempool.

P.S. the site says last payment 2mins ago for me.

yeah it was a little bit ago , i get my coins was just noticed that before when i got up , but its all good just was curious if payouts were changed thats all , for my planning lol

:/ you might have been right about something being off, my last payout was when I last replied to you... been a while...

LOL right as I type that I get a payout...

Looks like I spoke too soon... 2hrs later and the tx hash isn't even showing in the block explorer yet... somethings gone wonky over at easyhash.io

Yeah looking a little strange atm !!

[Opurum]

hi greetings to all.
the ONLY way to buy more ETN is thru cryptopia isnt it?
then how to transfer to our own wallet?
can somebody enlighten me please?
thanks.

Sign in to cryptopia and you'll see ETN/BTC pair atop the top coins. Place your buy order and wait to get it filled. To transfer, click Balances on the 'B' icon to see your available ETN, then click on the reddish arrow icon to start a transfer. Enter your ETN desitination wallet address and click done and finally, open your account registration mail inbox and find a comfirmation email from cryptopia. Comfirm the transfer and you are done.

Note: ETN is on its own blockchain and wallet and may not work with your other wallets.

[Piarb]

Looks like I spoke too soon... 2hrs later and the tx hash isn't even showing in the block explorer yet... somethings gone wonky over at easyhash.io

Pools admin posting at telegram chat:

"Daniel Bjørnådal, [07.11.17 08:52]
!!!
There is some issues with some transactions atm. We are working to fix it as we speak. Please be patient, and the transactions will arrive shortly

Daniel Bjørnådal, [07.11.17 08:52]
All transactions will be paid
"

[Grrizzly]

Need a few curious testers over here to catch some blocks and get withdrawals rolling:

https://etn.suprnova.cc

Don't move much over yet as I've got to test payments currently.. Directly to wallets were tested fine, Cryptopia needs to be tested with multiple users and then it should be fine.

Seems to be working for me, haven't withdrawn anything but hash rates are reporting correctly and my account is being credited, the hash rate graph is a bit wonky but thats fairly unimportant at this point

Can now confirm both cashing out to a private wallet and direct to an exchange have worked for me however the tx history doesn't display correctly, the tx# just says "array" and the block number shows "n/a".

Looks like I spoke too soon... 2hrs later and the tx hash isn't even showing in the block explorer yet... somethings gone wonky over at easyhash.io

Pools admin posting at telegram chat:

"Daniel Bjørnådal, [07.11.17 08:52]
!!!
There is some issues with some transactions atm. We are working to fix it as we speak. Please be patient, and the transactions will arrive shortly

Daniel Bjørnådal, [07.11.17 08:52]
All transactions will be paid
"

Thats good to hear My tx did show up but I have another still in a holding pattern

[Piarb]

Looks like I spoke too soon... 2hrs later and the tx hash isn't even showing in the block explorer yet... somethings gone wonky over at easyhash.io

Pools admin posting at telegram chat:

"Daniel Bjørnådal, [07.11.17 08:52]
!!!
There is some issues with some transactions atm. We are working to fix it as we speak. Please be patient, and the transactions will arrive shortly

Daniel Bjørnådal, [07.11.17 08:52]
All transactions will be paid
"

I received all stuck payments right now!

[Grrizzly]

https://www.facebook.com/electroneum

New update.

TLDR; they aren't promising anything but are hoping to get it out by the end of the day

[pochy123]

pussy 8 hours mine in the pool of suprnova and all were orphans ,,,
the same time elapicina ,, Electroneum Mining Pool ,, and everything was fine
How could I call this? '
k step aiiii    

[oserega1974]

pussy 8 hours mine in the pool of suprnova and all were orphans ,,,
the same time elapicina ,, Electroneum Mining Pool ,, and everything was fine
How could I call this? '
k step aiiii    

Suprnova is not working properly. I noticed it yesterday

[Grrizzly]

pussy 8 hours mine in the pool of suprnova and all were orphans ,,,
the same time elapicina ,, Electroneum Mining Pool ,, and everything was fine
How could I call this? '
k step aiiii    

Suprnova is not working properly. I noticed it yesterday

Seems to be working fine now.

[jeannavence143]

what is the minimum specs to mine? when I try the beginner software it force close.

[Darkoth89]

Latest update:

Yet another all night coding session! Each time we've run through the updated code we've found less and less items that needed fixing, and we're down to just a handful to go.
Each time I think we'll get it live, we seem to have missed, but we are SUPER CLOSE! We've literally worked all day and all night and are tantalisingly close to getting this live.
I know I was hopefull to get it live Sunday night, and then I was sure that it would be live Monday night. Working out a firm delivery time for software is a very tricky process, especially when you've introduced thousands of new lines of code and have made major enhancements in a hurry. We started at the weekend with a TON of bugs and errors, and now we have it down to a trickle. We are going to get some sleep and be back on this by lunchtime. Please keep your fingers crossed for a launch later today - I've got past the point of promising it, but we are STRIVING as HARD AS WE CAN to deliver this, and I do truly, understand everyone's frustration. I'm so sorry for these delays, we are nearly there.

[oserega1974]

please tell me how many coins in 24 hours you get on the 1 video card 1080 ti

[oyinkansolaberry]

I have strong feeling that this project will turn out to be a huge success. still biting my fingers cos I couldn't by directly from them before the deal got closed.