[ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9

[od1n]

HiveOS with v15 and 6x 1070 [Core +100 | MEM +0 | PL 85W]
C29 is mining with 22,8 gps
C31 is mining with 3,8 gps

C31 is running since 10 minutes, I will check if miner dies ...

[jabujax]

1070ti on windows 7 for c31 algo. insufficient memory. I set virtual memory 100000 but same problem occurs   is there anyone who has 1070ti 8gb can run c31 miner?

this is error image : https://ibb.co/K6F4sTc

[od1n]

HiveOS with v15 and 6x 1070 [Core +100 | MEM +0 | PL 85W]
C29 is mining with 22,8 gps
C31 is mining with 3,8 gps

C31 is running since 10 minutes, I will check if miner dies ...

1 hour update: Miner is still running but accepted share rate is <90%!
With C29 Bminer finally reaced >95% accepted shares.

[UselessGuru]

Bminer 15.0.0 crashes with all algorithms with the same error

Code:

BMiner.exe -api 127.0.0.1:4002 -uri ethstratum://UselessGuru.multipoolminer:x@europe.ethash-hub.miningpoolhub.com:20565 -uri2 blake2s://***********************.multipoolminer:x@blake2s.eu.nicehash.com:3361 -watchdog=false -devices 0
[FATA] [2019-02-18T10:50:39+01:00] CudaError: Unknown error:C:\WINDOWS\SYSTEM32\apphelp.dll

Windows 10 x64 1809, Nvidia driver 418.81, GTX 1080Ti


No such errors with 14.3.1

[Hlavson]

Note: if you want to mine with multiple gpu. Run miner for each gpu  one by one.  thats the tip

I have tried this, but this kills my G3930, after 4 running instances CPU is at 100% and system is unresponsible. What is your CPU?

[jabujax]

Note: if you want to mine with multiple gpu. Run miner for each gpu  one by one.  thats the tip

I have tried this, but this kills my G3930, after 4 running instances CPU is at 100% and system is unresponsible. What is your CPU?

1  1060 6gb c29
2 gpus 1080 ti c31
2 gpus 1070 8gb c31

is working. all of them is separate run.bat

nvidia Driver 418.91

Intel Pentium G3250  3.2ghz
Motherboard H81 Pro BTC  rev 2.0

cpu usage %43

[jabujax]

Note: if you want to mine with multiple gpu. Run miner for each gpu  one by one.  thats the tip

I have tried this, but this kills my G3930, after 4 running instances CPU is at 100% and system is unresponsible. What is your CPU?

1  1060 6gb c29
2 gpus 1080 ti c31
2 gpus 1070 8gb c31

is working. all of them is separate run.bat

nvidia Driver 418.91

Intel Pentium G3250  3.2ghz
Motherboard H81 Pro BTC  rev 2.0

cpu usage %43

But sometimes its not working. I am seting up virtual memory again. and restart and  its working.  But again sometimes just restarting and it is working.  İts interesting

[od1n]

HiveOS with v15 and 6x 1070 [Core +100 | MEM +0 | PL 85W]
C29 is mining with 22,8 gps
C31 is mining with 3,8 gps

C31 is running since 10 minutes, I will check if miner dies ...

1 hour update: Miner is still running but accepted share rate is <90%!
With C29 Bminer finally reaced >95% accepted shares.

After 2 hours I have nearly 15% rejected shares 
But sparkpool predicts nevertheless 10% more revenue then with C29 before.

[crairezx20]

hello guys what happen to bminer for coocku31 doesn't work to me running with awesomeminer but the reason resolver cache error.

Could you guys give some good settings to run coocku31 with my gtx 1080ti thanks.

[_javier_]

is c31 on 1070 only for linux?

In windows 7 miner says device (Aorus 1070) is 7700mb and insufficient for solver

[Digital_Seytan]

why does the Bminer version not have the options of the NBminer color and the screen information, and like more options like phoenixminer version 15 is slower and find no shares as before, and the speed hedge on the screen and the pool is much lower why developer

[haliy-2017]

How to setup API???

[sirkorro]

Getting around 0.8 G/s on a 1070 now.

Can you share you mem/core/pl values?

[umine]

Guys how are you able to get 1.2G/s per GTX 1080Ti at stock speed? I am unable to go above 0.6G/s per card with stock
Cards are at 50°C, so definitely not an overheating issue. Is here anybody with 6 GTX 1080Ti's on one rig running total at 7G/s?

OS: Win 7 x64
Drivers: 416.34
CPU: G3930

I get 1,33 G/s per 1080ti in a 6 card rig all 1080ti, but I'm using linux...

It could depends on GPU model. I get from one card 1.3 G/s and from the second only 1.1 G/s. Both on WinX system

[Hlavson]

Guys how are you able to get 1.2G/s per GTX 1080Ti at stock speed? I am unable to go above 0.6G/s per card with stock
Cards are at 50°C, so definitely not an overheating issue. Is here anybody with 6 GTX 1080Ti's on one rig running total at 7G/s?

OS: Win 7 x64
Drivers: 416.34
CPU: G3930

I get 1,33 G/s per 1080ti in a 6 card rig all 1080ti, but I'm using linux...

It could depends on GPU model. I get from one card 1.3 G/s and from the second only 1.1 G/s. Both on WinX system

I am able to get 1.2 G/s per every card, but only for 2 or 3 cards running at one time. When i add GPU 4,5,6 speed of all cards go down to 0.6 G/s.

[hash8]

> 1070ti on windows 7 for c31 algo. insufficient memory.
+1
"Insufficient memory 7847.66 MB available on device"
418.81 drivers

[cryptoyes]

Besides the malloc crash above, I also get lots of these:

Code:

[INFO] [2019-02-18T01:09:07+02:00] CUDA error DRIVER: '709' in func 'CopyEdges' line 174

or

Code:

[INFO] [2019-02-18T01:48:34+02:00] Received new job 90412
[FATA] [2019-02-18T01:48:38+02:00] Irrecoverable errors: [D7] GPU hang detected

or without any actual error:

Code:

[INFO] [2019-02-18T01:26:49+02:00] Total 9.30 G/s Accepted shares 55 Rejected shares 0 
[INFO] [2019-02-18T01:26:51+02:00] Received new job 0                           
[WARN] [2019-02-18T01:26:57+02:00] Miner died! It will be restarted soon...     

14.0.0 was the most stable. ALL VERSIONS AFTER 14.0.0 crash very often like above. Please fix these!

Trying to reproduce. What's the configuration of the machine, as well as software versions, etc.?

The more information the better. Thanks

I already provided all of those to you in the previous post, you even replied to it! https://bitcointalk.org/index.php?topic=2519271.msg49794934#msg49794934

Once again: Ubuntu 16.04, Nvidia 415.27, CUDA 10, GTX1070, GTX1070Ti, GTX1080Ti. Motherboard is ASRock H110 Pro BTC+ (13 PCIe slots). Intel G3930, Intel G4600, Intel i3-7100.

Crashes happen on all machines (it's a farm). No malloc crashes and no CUDA "CopyEdges" or "CollectEdges" crashes on 14.x. Constant crashes on 15.0 for all of these.

[cryptoyes]

Once again: Ubuntu 16.04, Nvidia 415.27, CUDA 10, GTX1070, GTX1070Ti, GTX1080Ti. Motherboard is ASRock H110 Pro BTC+ (13 PCIe slots). Intel G3930, Intel G4600, Intel i3-7100.

Crashes happen on all machines (it's a farm). No malloc crashes and no CUDA "CopyEdges" or "CollectEdges" crashes on 14.x. Constant crashes on 15.0 for all of these.

[admco]

Hi, hopefully this helps on the Windows 10 side of bug fixes for Grin31.

It seems that if there are spaces in the folder path, bminer quits with:

Code:

The system cannot find the path specified.

I had the miner working with two GPUs, but after Windows updated from build 1803 to build 1809 it stopped working with the following error:

Code:

[FATA] [2019-02-18T17:59:35-07:00] CudaError: Unknown error:C:\WINDOWS\System32\bcrypt.dll
[WARN] [2019-02-18T17:59:35-07:00] Miner died! It will be restarted soon...

I have another rig on build 1803 and it seems to be working.

I've also encountered OpenCL errors which are fixed by doing a clean install of the NVIDIA drivers.

[sharmanov]

So.... even though it sais AMD in your title your miner doesn't support AMD cards?