[ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9

[sirkorro]

v15.2.0 for 24 hours and fidelity is 1.001, 1.45 G/s on miner, 1.12 on grin.luxor.tech 24h hashrate <= reverting to 15.1.0

What exactly this fidelity number means and how to interpret it?
I can see something between 0.87 and 1.0 on my cards.

[bakermining76]

Echoing what others have said, the latest Bminer is showing a higher hashrate on Grin31, but the pool is showing a lower hashrate than with 15.1.0. This is using both 1080Ti's and 1080's on Luxor. Combined hashrate was 4.37 on Bminer and 4.19 on Luxor with 15.1.0. Combined hashrate of 4.56 on Bminer, but 4.02 on Luxor using 15.2.0 over a 24 hour perioed. No noticeable difference in rejected/stale shares, but fidelity was lower. I already switched back to 15.1.0.

[iamasic]

still 2070 not working after any 15.x.x on windows 10

0gps and no accepted shares

[Bucheran]

still 2070 not working after any 15.x.x on windows 10

0gps and no accepted shares

same problem

[cirlama]

v15.2.0 for 24 hours and fidelity is 1.001, 1.45 G/s on miner, 1.12 on grin.luxor.tech 24h hashrate <= reverting to 15.1.0

What exactly this fidelity number means and how to interpret it?
I can see something between 0.87 and 1.0 on my cards.

It is a measure of the luck/miner correctness. Overtime, the number should be close to one. For miners running over two hours, the fidelity should be at least greater than 0.95.

[dafuzz_rsa]

and if its not?
is it something to do with me(bad oc?) the pool or the miner?

[cue108]

Hi there,

given the following bminer's log file excerpt on mining ETH on miningpoolhub:
Bminer version string in log file:
[INFO] [2019-03-07T08:41:22+01:00] Bminer: When Crypto-mining Made Fast (v15.1.0-2d30b6f)

Code:

[INFO] [2019-03-07T05:17:54+01:00] Total 405.53 MH/s Accepted shares 1120 Rejected shares 6
[INFO] [2019-03-07T05:17:58+01:00] Received new job 292a                        
[INFO] [2019-03-07T05:18:02+01:00] Accepted share #1165                        
[INFO] [2019-03-07T05:18:10+01:00] Received new job 292b                        
[INFO] [2019-03-07T05:18:17+01:00] Accepted share #1166                        
[INFO] [2019-03-07T05:18:19+01:00] Received new job 292c                        
[INFO] [2019-03-07T05:18:20+01:00] [GPU 0] Speed: 44.96 MH/s Temp: 67C Fan: 46% Power: 149W 0.30 MH/J
[INFO] [2019-03-07T05:18:20+01:00] [GPU 1] Speed: 45.10 MH/s Temp: 64C Fan: 36% Power: 148W 0.30 MH/J
[INFO] [2019-03-07T05:18:20+01:00] [GPU 2] Speed: 46.55 MH/s Temp: 65C Fan: 41% Power: 150W 0.31 MH/J
[INFO] [2019-03-07T05:18:21+01:00] [GPU 3] Speed: 44.93 MH/s Temp: 64C Fan: 37% Power: 149W 0.30 MH/J
[INFO] [2019-03-07T05:18:21+01:00] [GPU 4] Speed: 44.87 MH/s Temp: 60C Fan: 27% Power: 149W 0.30 MH/J
[INFO] [2019-03-07T05:18:21+01:00] [GPU 5] Speed: 44.87 MH/s Temp: 66C Fan: 41% Power: 150W 0.30 MH/J
[INFO] [2019-03-07T05:18:22+01:00] [GPU 6] Speed: 45.44 MH/s Temp: 68C Fan: 48% Power: 150W 0.30 MH/J
[INFO] [2019-03-07T05:18:22+01:00] [GPU 7] Speed: 44.33 MH/s Temp: 65C Fan: 40% Power: 151W 0.29 MH/J
[INFO] [2019-03-07T05:18:22+01:00] Received new job 292d                        
[INFO] [2019-03-07T05:18:22+01:00] [D2] Creating DAG                            
[INFO] [2019-03-07T05:18:22+01:00] [D0] Creating DAG                            
[INFO] [2019-03-07T05:18:22+01:00] [D7] Creating DAG                            
[INFO] [2019-03-07T05:18:22+01:00] [D3] Creating DAG                            
[INFO] [2019-03-07T05:18:22+01:00] [D4] Creating DAG                            
[INFO] [2019-03-07T05:18:22+01:00] [D8] Creating DAG                            
[INFO] [2019-03-07T05:18:22+01:00] [D1] Creating DAG                            
[INFO] [2019-03-07T05:18:22+01:00] [D5] Creating DAG                            
[INFO] [2019-03-07T05:18:22+01:00] [D6] Creating DAG                            
[INFO] [2019-03-07T05:18:24+01:00] [GPU 8] Speed: 44.90 MH/s Temp: 61C Fan: 28% Power: 148W 0.30 MH/J
[INFO] [2019-03-07T05:18:24+01:00] Total 405.94 MH/s Accepted shares 1122 Rejected shares 6
[INFO] [2019-03-07T05:18:32+01:00] [D2] DAG has been created                    
[INFO] [2019-03-07T05:18:32+01:00] [D3] DAG has been created                    
[INFO] [2019-03-07T05:18:32+01:00] [D0] DAG has been created                    
[INFO] [2019-03-07T05:18:32+01:00] [D1] DAG has been created                    
[INFO] [2019-03-07T05:18:33+01:00] [D5] DAG has been created                    
[INFO] [2019-03-07T05:18:33+01:00] [D7] DAG has been created                    
[INFO] [2019-03-07T05:18:33+01:00] [D8] DAG has been created                    
[INFO] [2019-03-07T05:18:33+01:00] [D6] DAG has been created                    
[INFO] [2019-03-07T05:18:33+01:00] [D4] DAG has been created                    
[WARN] [2019-03-07T05:18:34+01:00] Rejected share #1167 ([23,"low difficulty share of 13"])
[INFO] [2019-03-07T05:18:43+01:00] Received new job 292e                        
[INFO] [2019-03-07T05:18:50+01:00] [GPU 0] Speed: 39.64 MH/s Temp: 68C Fan: 46% Power: 149W 0.27 MH/J
[INFO] [2019-03-07T05:18:50+01:00] [GPU 1] Speed: 39.74 MH/s Temp: 64C Fan: 37% Power: 148W 0.27 MH/J
[INFO] [2019-03-07T05:18:50+01:00] [GPU 2] Speed: 41.24 MH/s Temp: 65C Fan: 41% Power: 149W 0.28 MH/J
[INFO] [2019-03-07T05:18:51+01:00] [GPU 3] Speed: 39.71 MH/s Temp: 64C Fan: 37% Power: 149W 0.27 MH/J
[INFO] [2019-03-07T05:18:51+01:00] [GPU 4] Speed: 39.20 MH/s Temp: 60C Fan: 27% Power: 150W 0.26 MH/J
[INFO] [2019-03-07T05:18:51+01:00] [GPU 5] Speed: 39.57 MH/s Temp: 66C Fan: 41% Power: 150W 0.26 MH/J
[INFO] [2019-03-07T05:18:52+01:00] [GPU 6] Speed: 39.75 MH/s Temp: 69C Fan: 48% Power: 150W 0.26 MH/J
[INFO] [2019-03-07T05:18:52+01:00] [GPU 7] Speed: 39.13 MH/s Temp: 65C Fan: 40% Power: 151W 0.26 MH/J
[INFO] [2019-03-07T05:18:54+01:00] [GPU 8] Speed: 39.42 MH/s Temp: 58C Fan: 28% Power: 59W 0.67 MH/J
[INFO] [2019-03-07T05:18:54+01:00] Total 357.40 MH/s Accepted shares 1122 Rejected shares 7
[INFO] [2019-03-07T05:18:55+01:00] Received new job 292f                        
[INFO] [2019-03-07T05:19:20+01:00] [GPU 0] Speed: 41.67 MH/s Temp: 67C Fan: 46% Power: 148W 0.28 MH/J
[INFO] [2019-03-07T05:19:20+01:00] [GPU 1] Speed: 41.79 MH/s Temp: 64C Fan: 37% Power: 150W 0.28 MH/J
[INFO] [2019-03-07T05:19:20+01:00] [GPU 2] Speed: 43.25 MH/s Temp: 65C Fan: 40% Power: 149W 0.29 MH/J
[INFO] [2019-03-07T05:19:21+01:00] [GPU 3] Speed: 41.71 MH/s Temp: 64C Fan: 37% Power: 149W 0.28 MH/J
[INFO] [2019-03-07T05:19:21+01:00] [GPU 4] Speed: 41.40 MH/s Temp: 60C Fan: 27% Power: 150W 0.28 MH/J
[INFO] [2019-03-07T05:19:21+01:00] [GPU 5] Speed: 41.60 MH/s Temp: 66C Fan: 41% Power: 147W 0.28 MH/J
[INFO] [2019-03-07T05:19:22+01:00] [GPU 6] Speed: 41.93 MH/s Temp: 68C Fan: 48% Power: 150W 0.28 MH/J
[INFO] [2019-03-07T05:19:22+01:00] [GPU 7] Speed: 41.08 MH/s Temp: 65C Fan: 40% Power: 148W 0.28 MH/J
[INFO] [2019-03-07T05:19:24+01:00] [GPU 8] Speed: 41.64 MH/s Temp: 60C Fan: 28% Power: 149W 0.28 MH/J
[INFO] [2019-03-07T05:19:24+01:00] Total 376.06 MH/s Accepted shares 1122 Rejected shares 7
[INFO] [2019-03-07T05:19:26+01:00] Received new job 2930                        
[INFO] [2019-03-07T05:19:26+01:00] Accepted share #1168                        
[INFO] [2019-03-07T05:19:32+01:00] Received new job 2931                        
[INFO] [2019-03-07T05:19:37+01:00] Received new job 2932                        
[WARN] [2019-03-07T05:19:47+01:00] Rejected share #1169 ([23,"low difficulty share of 160"])

As you can see I have only 6 rejected shares on 1120 accepted one. I am very happy about that ratio!
Then without any further hint in the log file bminer creates new DAG:
[INFO] [2019-03-07T05:18:22+01:00] [D2] Creating DAG  
right after that bminer creates a ton of rejected shares.
At 8:30 after about 3 hours I had about 90 rejected shares on about 1500 accepted ones.


I would be happy to get some information to circumvent this behaviour of bminer.

cheers!  

[iamasic]

hi my 3x gtx 1070 getting low hasrate after 14.3.1,

before that i got 4g/s all cards just with 75%, 70%, 65% TDP + 1000, 1000, 800 Memclocks

now when I want to get 4g/s it's very difficult even though I've set up to 75% PL + 1000 memclocks + 50, 100, 100 core clocks

still unable to reach 4g/s on the 1st gpu the maximum is only 3.9g/s

if anyone has the same problem as me
please help me, thank you


sorry for my bad english i using gtranslate

same problem for me with all my 1070 on Hive

[papampi]

10.0.0

• Support reported hashrate feature on ETH pools.

I asked this before and got no answer, so asking again.
 
I see we should have hash rate report to ETH pools  since 10.0.0 but I'm not getting correct reports to ethermine.org, using 15.1 now.

Is there any arguments or changes I should make to enable this?

Any help on this:

[Juniormkl]

Bminer 15.2.0 added to https://www.minermonitoring.com/ and working fine on both Windows/Linux



Join our discord https://discord.gg/aGGaeqq



also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark

[evlo]

Comparison on hive os - current major public grin29 miners, both 3xx and 4xx nvidia drivers compared

gminer 1.35


bminer 15.2


nbminer 21

the 3xx driver starts faster, but then settles down


sorry for the size of the images :/

This does NOT compare pool side hashrates!

[laik2]

Why didn't you post that in your OS own thread?

[realbminer]

10.0.0

• Support reported hashrate feature on ETH pools.

I asked this before and got no answer, so asking again.
 
I see we should have hash rate report to ETH pools  since 10.0.0 but I'm not getting correct reports to ethermine.org, using 15.1 now.

Is there any arguments or changes I should make to enable this?

Any help on this:

thanks, I will take a look to this issue.

[mfurman]

Bminer 15.2.0 does not work when trying to mine Grin-29 on RTX2070. Here is the error, I see when trying to run bminer 15.2.0 on RTX2070 system (GTX1060 is fine): CUDA error DRIVER: 702 in func 'bminer::cuckoo::CuckooStyleSolverCudaBase" line 196, fatal cuda error (for GPU0 and GPU1) Miner died. Older versions were fine but 14.1 had better hashing rate than any 15. The previous versions of Bminer were working fine

[realbminer]

We’re pleased to release Bminer 15.3.0. The release provides:

* Improve the performance of Cuckaroo29 by 5%.
* Slightly improve the performance of Cuckatoo31.
* Improve compatibility on Windows.

Please see https://www.bminer.me/releases/ for more details.

Happy mining.

[papampi]

We’re pleased to release Bminer 15.3.0. The release provides:

* Improve the performance of Cuckaroo29 by 5%.
* Slightly improve the performance of Cuckatoo31.
* Improve compatibility on Windows.

Please see https://www.bminer.me/releases/ for more details.

Happy mining.

Thanks for update,

Report hash rate to pool not fixed?

[installer1983]

Not works with Nicehash it 2 last versions they dont working on it.
Neither 15.2.0 nor 15.3.0 - not works with Nicehash

[topteam]

We’re pleased to release Bminer 15.3.0. The release provides:

* Improve the performance of Cuckaroo29 by 5%.
* Slightly improve the performance of Cuckatoo31.
* Improve compatibility on Windows.

Please see https://www.bminer.me/releases/ for more details.

Happy mining.

thanks
please add recommendation for rigs with a weak cpu (G3930) and with a lot of cards (>12)
after version 15.0.0 cpu overload (even with -intensity 0) and hashrate drop
algo C29

[papampi]

thanks
please add recommendation for rigs with a weak cpu (G3930) and with a lot of cards (>12)
after version 15.0.0 cpu overload (even with -intensity 0) and hashrate drop
algo C29

Best recommendation is to get a better CPU,

You spent thousands on a 12+ GPU rig but don't want to spend hundred on its CPU?

Its on you, not the miner.

[realbminer]

We’re pleased to release Bminer 15.3.0. The release provides:

* Improve the performance of Cuckaroo29 by 5%.
* Slightly improve the performance of Cuckatoo31.
* Improve compatibility on Windows.

Please see https://www.bminer.me/releases/ for more details.

Happy mining.

Thanks for update,

Report hash rate to pool not fixed?

another dev is working on fix the issue. I think it will be fixed soon.